Jump to content
Find Professionals    Deals    Get Quotations   Portfolios

kangeroo168

Members
  • Content Count

    236
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by kangeroo168


  1. Please take caution in topping up of the balcony floor. There is always a max load on how much more weight can the balcony floor withstand. HDB balcony (some ) has less max load than the normal flooring, so most often, condo will also has that. in worst case, cracks and falling of concrete will occur at your below neighbour unit... then sure lots of legal issues. Best is to check out your condo management on topping up/overlaying.

    2 and 3 sure cannot. because management condo wants a 'uniform' look on the outside


  2. there is nothing u can do with it because its the problem with the underlying tiles, and not the vinyl flooring. if the uneven is something like a pothole, u still stand a small chance of putting foam or even fill up that area with light weight cement. if its bulging up like a hill, then no choice, u have to hack that surrounding area, and then smoothen it. then relay back the vinyl floor.


  3. well, as a layman pov, most of us are thinking tilera are short changing us. however, bigger tiles= heavier tiles =bigger cutting tools = bigger leverage when laying tiles = more difficult in laying tiles, and in same instance 800 or even 1m tiles sometimes need 2 tiler just to align/carry around. I do not know the market price increase for using 800mm tiles, but I do know it is more expensive than 600mm tiles.


  4. Floor tiles, u also must see how many are hollow. They may crack together or individually. They may also crack while someone is stepping on TOP of it, thus resulting in injury. Normally if a house have so many hollowed floor and wall tiles, it's best to redo all. Want to pain, just pain one time, rather than keep rectifying bit by bit in the future


  5. Both of your Contractors are correct. Hollow tiles, if u don't tamper with them, shouldn't be a problem. However , there have been some cases where the tiles loosen so much that they drop out. That is what happened to one of my friends house in Tampines. His wall tiles all drop down. 


  6. after collecting the keys, first thing is, check for defects. if there is, ask hdb to rectify.

    u can engage either contractor or ID, or even do things at your own. see which one u are more comfortable, and if u have lots of time, can liaise all things yourself.

    of cos, engaging contractor or ID will be more costly as compared to doing all things yourself, cos they are providing a service in return for money.

    pm u liaoz

    • Like 1

  7. well Jackson, this quotation has too many question marks over its costing.

    1. hacking demolition : its a bit overpriced.

    15 and 16. this is where the question marks comes in. from what I understand, you are re-doing 1 living room and 2 bedroom flooring. it is too cheap to be true. I seriously doubt the pricing. unless u buy the tiles yourself, then its still a bit reasonable

     18. what? waterproofing the kitchen water trap area only? I thought we are supposed to water proof the whole kitchen instead of the water trap area? are you sure that's the correct procedure?

    electrical and plumbing wise, is a tad expensive. both can shave off a couple of hundreds.

    62, 63, 65 a tad expensive. can negotiate.

    but seriously, your this quote is written in a way to confuse people. I have a hard time following the items. although the overall pricing seems reasonable, but some things are just too cheap. cheap is good, but if cheap involves using inexperienced workers, then the end problem is passed to the owners. would suggest u to compare a few quotes.


  8. Just go to any old tiles shop in defu or Eunos . There should have. U must take note, if u have edging, the tiles is different type. Must have 1 side that is rounded. Grout powder I think those diy shop will have.

    U need to have chemical cement, cement, W1 , chisel, hammer, cutter(if it's at a difficult position to hack) scrapper, mallet(for soft knocking on the installed tiles) the small strip to make the allowance between the tiles.

    somemore u need to know the correct mixture of those cements and chemicals. 

    In short, its best to engage a professional tiler to save all the trouble.


  9. advice:

    1. pulling the carpentry out, re-run and putting them back sounds easy, BUT if u go micro into the problem, u will see that its not as easy as it seems. firstly, taking the carpentry out sometimes involves breaking the laminate, wood etc. once broken, are u able to find back the same tone of the laminate? if no, are u able to accept some of the edges jagged? secondly, no carpenters (or those desperate for sales) will accept your proposal. this is because if those things happen to break in the process of taking out, it will be chargable to who? 3rdly, sometimes those trunkings of the cables will intersect with ur carpentry. cutting an allowance might not be feasible.

    2. yes and no. u can take out the laminates, but u might not be able to repolish the tiles. also must depend on what tiles. u can only do deep cleaning to remove the glue stains. but will not be 100% removed. sure will have some spots here and there.

×