Xmen2 0 Report post Posted December 29, 2008 i was installing a bamboo blind, ceiling mount ... after i drilled a hole in the ceiling and put in a wall anchor, i tried to screw a hook (those screw type) into the ceiling, think i tried too hard, the hook broken off at the neck, and hence left the screw inside the ceiling, only a very tiny piece, where it broke, can be seen i tried to use a plier to pull out the remaining screw, but it kept slipping away as the piece left outside is too small for the plier to get a firm grab can anyone advice me what shall i do to remove the broken screw from the ceiling? Share this post Link to post Share on other sites
gladyslim 0 Report post Posted January 1, 2009 If u are using the nylon plug, use thin drill bit to drill onto the plug. Share this post Link to post Share on other sites
Xmen2 0 Report post Posted January 1, 2009 If u are using the nylon plug, use thin drill bit to drill onto the plug. thank you for the suggestion, guess i have to try it next time, as i have already given up ... i patched up the existing one, and drilled another hole nearby Share this post Link to post Share on other sites
