Jump to content
Find Professionals    Deals    Get Quotations   Portfolios
Sign in to follow this  
vermyapre

Electrical work cost??

Recommended Posts

Hi

For those who engaged Eric, what switches did he give? MK Switches?

Before I confirmed with him, he said will be using MK.

When he finished most of the electrical work and I went back to see, he gave Feng Yip swithces (the rocker switches with a flower logo at the bottom right). He's not honest, he tot I dun know tat switch is from Feng Yip.

 
  • Like 1

Share this post


Link to post
Share on other sites

Join 46,923 satisfied homeowners who used renotalk quotation service to find interior designers. Get an estimated quotation

So did u managed to get it changed ? Initially I thought that the switches we have to provide but it seems that the electrician will provide these.

vermilion, u also stay in telok blangah ? which blk ?

devilaz, u've got pm !

 

Share this post


Link to post
Share on other sites

Can I check, how many of you actually asked for PUB testing since it's optional? There's much more freedom if you skip the test, if you decide to do the test, quite a few restrictions like height of DB box, number of heater points, height of plug in kitchen, etc ....

I'm in a dilemma.

 

Share this post


Link to post
Share on other sites

I am doing a complete renovation of an old condo unit I bought.

The electrical costs my ID has quoted me are approx double that in the posts I have seen in this thread.

When I pointed this out to my ID, they asked if these prices I have seen are for concealed wiring.

So are the prices posted on this thread based on concealed wiring?

Some of the prices I have been quoted...

Single power point = $90

Double power point = $110

Light switch = $80

Light point = $60

Fan = $80

SCV = $220

Telephone & Data point = $220

Distribution board (32A single phase) = $340

Edited by stopspam
 

Share this post


Link to post
Share on other sites
I am doing a complete renovation of an old condo unit I bought.

The electrical costs my ID has quoted me are approx double that in the posts I have seen in this thread.

When I pointed this out to my ID, they asked if these prices I have seen are for concealed wiring.

So are the prices posted on this thread based on concealed wiring?

Some of the prices I have been quoted...

Single power point = $90

Double power point = $110

Light switch = $80

Light point = $60

Fan = $80

SCV = $220

Telephone & Data point = $220

Distribution board (32A single phase) = $340

**** ex. just like my ID, quoted me almost double of Eric's.

Eric is a lot cheaper.

His workers not bad, sometimes a bit forgetful and slipslop, but Eric will tell them to do again if not right.

As for the MK switches I stated above, Eric can change to MK.

But in the end, I refused, cos he's giving MK slimline series, not avant series.

Slimline is worse than Fung Yip switches.

Slimline is so hard to press and so ugly, Fung Yip is smooth to press and chamfered and the edges.

 

Share this post


Link to post
Share on other sites

Hi all,

I had just gotten a quotation from an electrician (refer below). My place is a landed property (corner terrace). From what I see, he is charging very much higher than what some of the guys here have posted. Is it because mine is terrace? Or is he just charging too high?!

BTW, I don't see any indication of PUB testing.

SCV Point - $150

Single 3 pin Power Point - $60

Double 3 pin Power Point - $70

Telephone Point $80

2 way light switch - $180

Lighting Point - $75

BTW, mine is not concealed points.

All power points, switches are layed using PVC casing.

Edited by hayashiryo
 

Share this post


Link to post
Share on other sites

I would like to find out if anyone has engaged Mr Quek's service, as I have found his charges not that transparent after all. I dont know if he has too many projects in hand, he is quite forgetful and has charged me for the work which I told him initially to do, but dont need him to do at the end. Anyone has smiliar experience?

 

Share this post


Link to post
Share on other sites

Normally prices are for non-concealed wiring. Independent electricians do not normally quote concealed wiring as the hacking and replastering is done by the general contractor. Your ID probably giving you a package price including hacking and replastering.

I am doing a complete renovation of an old condo unit I bought.

The electrical costs my ID has quoted me are approx double that in the posts I have seen in this thread.

When I pointed this out to my ID, they asked if these prices I have seen are for concealed wiring.

So are the prices posted on this thread based on concealed wiring?

Some of the prices I have been quoted...

Single power point = $90

Double power point = $110

Light switch = $80

Light point = $60

Fan = $80

SCV = $220

Telephone & Data point = $220

Distribution board (32A single phase) = $340

 

Share this post


Link to post
Share on other sites
I just finalise my rewiring job. Its for 4-rm.

Prob u might be interested :bangwall:

Light point. (Wiring + light fitting installation.) - $35x17

Loopping point. (Wiring + light fitting installation.) -$25X11

Door bell. (Wiring + insall + switcher.)- $25X1

2x13A SSO. - $50x5

1x13A SSO. - $40x9

Hood & Hob point. - 1set $45

15A air-con point. -1X$75

Water heater point. - $80X2

SCV point. (Living hall) - 1X$70

Tel. Point. (Living hall) - 1x$45

Complete set of electrical DB. - 1set $220

Earthing $50

Total spent 2170

May not be the best price but its up to individual. I did manage to get a $1300 package for the above. Excluded installation and some other charges. The electician did not reveal much so i did not much what he meant by other charges. The highest quote u received was 2.5K wiith no installation included. I almost fainted...so x!:sport-smiley-004:! Its was recommened by my contractor. Thats' why i begin to find my own electrician. Hope the above can provide a gd reference.

Cheers !!

Hi,

Why do u need a complete set of DB? Just wondering why is there a need to change the DB... I was recommended by my ID to shift the DB in order to cater for my shoe cabinet. Is it safe to do that? What happens if the electrician did not do a good job?

 

Share this post


Link to post
Share on other sites

Hi Guys,

What you think of my quotes

Lighting point $30.00

13A Single power point $45.00

13A double power point $55.00

TV point $90.00

Extend telephone point $15.00

Extend 13A Single power point $15.00

Reposition ceiling Lighting point $15.00

Oven, Cooker & Hood point $55.00

Install light $9.00

Door bell install $10.00

 

Share this post


Link to post
Share on other sites
Hi Guys,

What you think of my quotes

Lighting point $30.00

13A Single power point $45.00

13A double power point $55.00

TV point $90.00

Extend telephone point $15.00

Extend 13A Single power point $15.00

Reposition ceiling Lighting point $15.00

Oven, Cooker & Hood point $55.00

Install light $9.00

Door bell install $10.00

Hi,

I need to rewire my entire place cos very old. Can share your electrician contact?

Thanks very much

 

Share this post


Link to post
Share on other sites

Hi,

I was quoted

$120 for submission& single drawing

$120 for apply SP services testing

$220 for E.L.C.B

Is that necessary? I am doing rewiring for my 4rm resale.

Also I was quoted for both 13amp single and double switch. Isnt double enough? Total cost ended up to be ard $2.8k! I though this was ridiculous... someone pls let me know if this is the normal rate?

 

Share this post


Link to post
Share on other sites

Hi De_princess,

$2.8K expensive or not depends on the number of lighting points, power points, heater/hob & hood points, SCV point (around $95/point), phone/fax points, DB Box (most expensive item around $350), etc... you have.

Are you changing the Main Cables? Recommended if your place is very old and going for SP testing.

Usually SP testing cost is around $250-280 but some ID electrician will recommend using metal casing (which is an extra cost if a lot of metal casing involved) for the wiring (especially behind feature walls, walls, wardrobe) for SP testing so that in case you drill in future you will not drill the cables directly.

Cheers :notti:

Hi,

I was quoted

$120 for submission& single drawing

$120 for apply SP services testing

$220 for E.L.C.B

Is that necessary? I am doing rewiring for my 4rm resale.

Also I was quoted for both 13amp single and double switch. Isnt double enough? Total cost ended up to be ard $2.8k! I though this was ridiculous... someone pls let me know if this is the normal rate?

Edited by lifestyle
 

Share this post


Link to post
Share on other sites

Hi De_princess.. i was also quoted 2.8k for the whole hse, 5rm! got a shock.. i'm getting them to send me the breakdown.. can share with me your quotation?

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×