Jump to content
Find Professionals    Deals    Get Quotations   Portfolios

Recommended Posts

Hi

Appreciate your opnions on below quotes.

Personally, I find the items in red a little high, esp for the floorings and kitchen solid surface.

- Can anyone advise why the kitchen floorings are rather pricely?

- For the price of the vinyl flooring, I think could have done HERF (Evorich) by topping up another $400.

Thank you.

(A) General Works

1 Supply labour & materials to carry out the following works:-

a Dismantle & dispose existing cabinet at kitchen $250

b Dismantle & dispose existing partitional wall, door and door frame along passageway $100

c Hack off existing sink & cooker stove at kitchen $450

d Hack off existing skirting ****/dining hall, passageway and 3 bedrooms $350

e Hack off existing fridge base at kitchen $50

f Hack off wall (1/2 ht) between living hall and kitchen $100

g Dismantle & dispose existing sliding door, 2 sets nako window and door frame between kitchen and yard area $100

h Loading of renovation materials $150

i Clear debris throughout and after renovation $200

j Chemical wash and general cleaning upon handing over $250

(B) Masonary Works

1 Supply labour & materials to carry out the following works:-

a Overlay homogenous floor tiles ($3/sqft) for kitchen and service balcony $1950 ($15 psf)

b Construct 50mm Ht motar base with side tilings for cabinet (est 4ft length) and repair existing existing cabinet base after hacked at kitchen $500

c Construct 50mm Ht motar base with full tilings for washing machine (est 2ft x 2ft) at kitchen $150

d Construct 50mm Ht motar base with full things for fridge (est 800 x 700)mm at kitchen

$150

e Make good,plaster smooth and replace wall tiles (matching or similar) at hacked wall area between living hall & kitchen and kitchen & yard area $500

f. Make good and plaster smooth hacked skirting area for entire unit $250

g. Cut out groove for washing machine outlet pipe, apply water proof membrance, lay PVC outlet pipe and box-up with full tilings at yard area $250

2 Supply labour & materials to replace tiles for door step at main entrance (If required) $180

© Vinyl Floor Works

1 Supply labour & materials to apply self levelling compound and lay 2.5mm thk vinyl flooring for living/dining hall, passageway and 3 bedrooms $5130 ($5 psf with 10% buffer as wastage)

2 Supply labour & materials to install solid wooden skirting for living/dining hall, passageway and 3 Bedrooms

$1500, 6 per ft

(D) Plumbing Works

1 Supply labour & materials to carry out the following works:-

a Install hot pipe for wash basin at master and common toilet

b Install inlet & outlet pipe for washing machine

c Install sink,tap, inlet and outlet pipe at kitchen (sink & tap by owner)

650.00

(E) Aluminum Window/ Metal Works

  • Green tinted casement windows with white horizontal grills ($340/m)
  • MBR 2.4m $ 810
  • Bedroom 1 1.3m $ 450
  • Bedroom 2 1.3m $ 450
  • Install alum windows (WPC) c/W acrylic panel sliding door at kitchen entrance $300

(F) Painting

  • Entire house with ICI/ Nippon paint (103 sq metres) $1600
  • Oil paint for main gate/ door, 3 bedroom and store doors $480

(G) Carpentry

  • Kitchen ($230/ft)

18ft top/ bottom cabinet with laminate finish, c/w ABS edging, soft close hinge $4140

  • 1 alum frame frosted glass door
  • 1 SS dish rack
  • 1 cutlery tray
  • 1 drawer
  • Solid surface (12ft) ($75/ft)

9] $1725

  • Living Room

Full ht feature wall panel (2.5m x 2.4m) using plywood backing $1550

  • laminate finish (1m ht at bottom)
  • 3 panels of 5mm clear mirror (at top)

35]

Wall Hung bottome TV console with laminate finish (8ft) ($130/ft)

9] $1040

Full ht L shape storage cabinet (12ft) with laminate finish ($230/ft)

$2760

  • Bedroom

8ft top hung cabinet with study table with laminate finsh c/w BS edging ($220/ft)

$1760

(H) Partition

  • False Ceiling at MBR (120 sq ft) $618 ($3 psf)
  • False Ceiling at Bedroom (110 sq ft) $435, $3 psf ($3 psf)
  • Box-up to flush living room wall (160 sq ft) $736 ($4 psf)
  • Glass work

8]($30 psf?)

  • 6mm white tampered glass backing between top/ bottom cabinets in kitchen $700
  • Electrical Works

  • 2 x 13 A power pt $70
  • 1 x 13 A power pt $60
  • SCV pt $100
  • Light pt $35
  • Tel pt $55
  • Heater pt $110
  • Install light fitting $10
  • Install hanging light/ fan $30
  • Relocate any of above $35

Total without electrical works $34 000

Edited by 2359
 

Share this post


Link to post
Share on other sites

Join 46,923 satisfied homeowners who used renotalk quotation service to find interior designers. Get an estimated quotation

Way too expensive.. I'm shortlisting my quotes down to 2 IDs and both are giving me $110-$120 per foot for kitchen cabinet. One of them is quite reputable here in the forum too.

Solid surface price is always 2 digits only (per foot).. You can get yourself IQuartz or granite with $140 per ft and still have a lot of spare change for beer.

 

Share this post


Link to post
Share on other sites

Hi

For kitchen cabinets, trust this equates to $220 - 240 per ft for top/ bottom?

For solid surface, the figure is $75 per ft after clarification on the length.

Will anyone like to comment on the price of the flooring, thanks

 

Share this post


Link to post
Share on other sites

Hey,

Yeah the flooring is kinda expensive. Possible to state the brand? Yeah evorich flooring would be ideal but there are pros and cons. Pm me so I can share with you.

 

Share this post


Link to post
Share on other sites

yes, flooring is expensive. can recommend u lower price ones.

wood skirting---what? wood skirting needs $1,500??? u sure or not???

vinyl floor tiles -- yes, its a bit overpriced.. what is the brand?

featurewall-- slightly higher, u can maybe shave off $100-$150

solid surface-- i find it quite reasonable, only if u are getting the 'shiny/glossy' type, as they tends to be more expensive.

glasswork--slightly higher, can shave a bit off

these are all my suggestions.

 

Share this post


Link to post
Share on other sites

Thank you for the suggestion. How much would you recommend the skirting, glasswork, partition and windows to be shaved off?

 

Share this post


Link to post
Share on other sites

The painting seems quite expensive too.. you may want to ask your contractor to specify the number of colours allowed and the range you can choose from.. the amount you are paying for for the oil paint on top of the wall paint seems too ex.. Also, i assume you do not need a sealer coat for the wall?

 

Share this post


Link to post
Share on other sites

Oh and forgot to add.. for the carpentry, only one drawer or one set of drawers is included in the $230/ft run he quoted you? 1 drawer seems too little and it may mean that he will charge you extra for additional drawers..

 

Share this post


Link to post
Share on other sites

Ok. Some updated quotes

Solid skirting at $6 / ft

False ceiling at $3 psf

All details updated in first post.

Saw this paint online. . Dulux Light & Space, has anyone used it before? Supposed to reflect twice as much lights in the walls

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  


×