Jump to content
Find Professionals    Deals    Get Quotations   Portfolios
Sign in to follow this  
AirconBestValue

Aircon Installation Best Price

Recommended Posts

Hi Michelle,

Please quote the following for 5 rm BTO which I like to air con 3 bed rooms, 1 study room, 1 living room.

MITSUBISHI SYS 3 - INVERTER (2 ticks)
MXY3A28VA
MSYGE10VA x 02
MSYGE24VA  x 01

MITSUBISHI SYS 2 - INVERTER (2 ticks)

MXY2E20VA
MSYGE10VA x 02

- installation 
- 1/2" Armaflex class "0" insulation
- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation
- Cables – 4C40,4C70 with PSB Tested
- PVC Trunking – minimum 2mm thick
- additional cost for length of pipe used ?
- warranty (parts and installation)

Thanks

 

Share this post


Link to post
Share on other sites

Join 46,923 satisfied homeowners who used renotalk quotation service to find interior designers. Get an estimated quotation

Hi Michelle,

Would appreciate if you can quote me the following. My place is a 5rm HDB with a built study. Therefor, need to cool 3 x Bedroom, 1 X Living Room + Dining Room, and 1 Small Study.

 

Daikin. System 3. (Two Sets)

FTKS20KVMA X 2

FTKS25 KVMA X 1

Also, as per above, please provide broken down cost for:

- installation 
- 1/2" Armaflex class "0" insulation
- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation
- Cables – 4C40,4C70 with PSB Tested
- PVC Trunking – minimum 2mm thick
- additional cost for length of pipe used ?
- warranty (parts and installation)

 

Thank you.

 

 

Share this post


Link to post
Share on other sites

Hi Michelle,

Would appreciate if you can quote me the following. My place is a 4rm HDB resale. Looking at either this 2 specs.

Daikin. System 3 Spec 1

3MKS71FSG / FTKJ25NVMS x 2 + FTKS60FVM

Config 2
3MKS71FSG / FTSK25DVM x 2 + FTKS60FVM 

please provide broken down cost for:

- installation 
- 1/2" Armaflex class "0" insulation
- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation
- Cables – 4C40,4C70 with PSB Tested
- PVC Trunking – minimum 2mm thick
- warranty (parts and installation)

Thank you

 

 

 

Share this post


Link to post
Share on other sites
On 5/30/2016 at 11:14 PM, ChasingStars said:

Hi Michelle

I'm looking at 2 quotations - Type: Landed

Kindly quote me on Mitsubishi Starmex (2 ticks), including installation and GST, for the following;

 

1) System 1 x4

- 12k BTU x2 (bedroom)

- 18k BTU x 1(bedroom)

- 24k BTU x 1(bedroom)

2) System 1 x2 & System 2 x1

System1 x2:

- 12k BTU x1 (bedroom)

- 24k BTU x 1(bedroom)

System 2 x1:

12k BTU & 18k BTU(bedroom)

 

Please include the following;

-installation (1 time installation)
-1/2" Armaflex class "0" insulation
- G22 copper pipe
-16mm drainage
-additional cost for any length of pipe used for installation?
-warranty (parts and installation), etc....

Please break down the cost.

 

Thanks.

Hi,

I have just PMed to you. Thanks for your enquiry.

 

Hope can hear from you soon :)

 

Regards,

Michelle

 

Share this post


Link to post
Share on other sites
On 5/31/2016 at 6:22 PM, KeVnAsH said:

Hi Michelle,

I am considering 2 replacement options for my current 7-8 years old condo aircon system.

Option 1: Mitsubishi Electric System-2 ×2

MXY3G20VA 
MSXY-FJ10VE x 02

MXY3G20VA 
MSXY-FJ18VE x 01

Option 2: Mitsubishi Electric System-3 x1

MXY3G28VA 
MSXY-FJ10VE x 02
MSXY-FJ18VE x 01

Hope to receive a quote from you soon for my consideration.

Regards.

Kevin

Hi,

I have just PMed to you. Thanks for your enquiry.

 

Hope can hear from you soon :)

 

Regards,

Michelle

 

Share this post


Link to post
Share on other sites
On 6/1/2016 at 5:14 PM, pandaboxer said:

Hi Michelle,

Please quote the following for 5 rm BTO which I like to air con 3 bed rooms, 1 study room, 1 living room.

MITSUBISHI SYS 3 - INVERTER (2 ticks)
MXY3A28VA
MSYGE10VA x 02
MSYGE24VA  x 01

MITSUBISHI SYS 2 - INVERTER (2 ticks)

MXY2E20VA
MSYGE10VA x 02

- installation 
- 1/2" Armaflex class "0" insulation
- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation
- Cables – 4C40,4C70 with PSB Tested
- PVC Trunking – minimum 2mm thick
- additional cost for length of pipe used ?
- warranty (parts and installation)

Thanks

Hi,

I have just PMed to you. Thanks for your enquiry.

 

Hope can hear from you soon :)

 

Regards,

Michelle

 

Share this post


Link to post
Share on other sites
On 6/2/2016 at 5:15 PM, peabrainpun said:

Hi Michelle,

Would appreciate if you can quote me the following. My place is a 5rm HDB with a built study. Therefor, need to cool 3 x Bedroom, 1 X Living Room + Dining Room, and 1 Small Study.

 

Daikin. System 3. (Two Sets)

FTKS20KVMA X 2

FTKS25 KVMA X 1

Also, as per above, please provide broken down cost for:

- installation 
- 1/2" Armaflex class "0" insulation
- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation
- Cables – 4C40,4C70 with PSB Tested
- PVC Trunking – minimum 2mm thick
- additional cost for length of pipe used ?
- warranty (parts and installation)

 

Thank you.

 

Hi,

I have just PMed to you. Thanks for your enquiry.

 

Hope can hear from you soon :)

 

Regards,

Michelle

 

Share this post


Link to post
Share on other sites

Hi Michelle,

I will like to get quotation for myself and my friend's house below:

Quote 1 - Landed Property 
Panasonic single split - CU-XS9RKZ (new model, 9000 BTU)
- 1/2" Armaflex class "0" insulation
- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation
- Cables – 4C40,4C70 with PSB Tested
- PVC Trunking – minimum 2mm thick

Quote 2 - HDB
Panasonic system 2 - CU-2XS18RKZ (new model, 2 x 9000 BTU)
- 1/2" Armaflex class "0" insulation

- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation
- Cables – 4C40,4C70 with PSB Tested
- PVC Trunking – minimum 2mm thick

For survey, is it available on weekend or after 6PM?

 

Share this post


Link to post
Share on other sites

Hi

I have a resale (with 4 bedrooms) condom which is about 16 years old.

Can you quote  system 2  12K BTU x 2 cooling units

and another system 2 with 18K BTU x 2 cooling units? Mitsubishi preferred

Can u advise whether the existing piping can be retained especially for the 18 BTU?

 

Thanks

 

Share this post


Link to post
Share on other sites
On 6/12/2016 at 11:14 PM, lipton said:

Hi Michelle,

I will like to get quotation for myself and my friend's house below:

Quote 1 - Landed Property 
Panasonic single split - CU-XS9RKZ (new model, 9000 BTU)
- 1/2" Armaflex class "0" insulation
- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation
- Cables – 4C40,4C70 with PSB Tested
- PVC Trunking – minimum 2mm thick

Quote 2 - HDB
Panasonic system 2 - CU-2XS18RKZ (new model, 2 x 9000 BTU)
- 1/2" Armaflex class "0" insulation

- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation
- Cables – 4C40,4C70 with PSB Tested
- PVC Trunking – minimum 2mm thick

For survey, is it available on weekend or after 6PM?

Hi,

I have just PMed to you. Thanks for your enquiry.

 

Hope can hear from you soon :)

 

Regards,

Michelle

 

Share this post


Link to post
Share on other sites

Please quote for System 4 Mhi (3ticks). 5 room BTO, Bedrooms 13k BTU, Living 38k BTU.

Kindly include GST
 -installation
 -1/2" Armaflex class "0" insulation
 - G22 copper pipe
 -16mm drainage
 - additional cost if any
 - warranty 

thanks

 

Share this post


Link to post
Share on other sites
On 6/13/2016 at 8:58 AM, mayotedy said:

Hi

I have a resale (with 4 bedrooms) condom which is about 16 years old.

Can you quote  system 2  12K BTU x 2 cooling units

and another system 2 with 18K BTU x 2 cooling units? Mitsubishi preferred

Can u advise whether the existing piping can be retained especially for the 18 BTU?

 

Thanks

Hi,

I have just PMed to you. Thanks for your enquiry.

 

Hope can hear from you soon :)

 

Regards,

Michelle

 

Share this post


Link to post
Share on other sites
On 6/15/2016 at 5:53 PM, moomoosg said:

hi,

I have a 4 rm 

Can you quote  system 3  9k BTU x 3 cooling units. looking for a budget brand as it for rental flat

 

 

Hi,

I have just PMed to you. Thanks for your enquiry.

 

Hope can hear from you soon :)

 

Regards,

Michelle

 

Share this post


Link to post
Share on other sites

Hi, I'd like a quote for the Daikin System 3. I'd like to see the price for [3mks71fsg, 3 x FTKS25DVM]. Please include the exact specifications and brand of the materials to used (such as SWG22/23, 3/8 or 1/2 inch insulation). Bracket and powerpoint charges as well. Thanks.

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×