Installing Whirlpool 808 Acm Hob. Advise Needed

[tianzui 0]

Hi all,

I have just bought a whirlpool acm 808 induction hob. 7200w, 31.3a. Was told that to install a 30amp switch by e seller. However, my electrician say that hdb max is 40a, best not to have a switch more than 30a. Should i change the hob?

Cooking zones

• The front left zone: Induction
• The diameter of the front left zone: 145 mm
• Power front left zone / Booster: 1200-1800 W
• Rear left zone: Induction
• Diameter of the rear left zone: 210 mm
• Power rear left zone / Booster: 2200-3200 W
• Right rear zone: Induction
• Diameter of the rear right zone: 180/230 mm
• Power rear right zone / Booster: 1800-2200 W
• Front right zone: Induction
• The diameter of the front right zone: 180/230 mm
• Power front right zone / Booster: 1800-2200 W

Specifications

• Maximum power input: 7200 W
• Voltage: 230 V
• Frequency: 50-60 Hz
• Recommended network connection: 400V 3N ~ V
• Power consumption in standby mode (2010/30 / EC): <1.0 W
• Energy consumption in off mode (2010/30 / EC): <0.5 W
• Dimensions (HxWxD): 56x580x510 mm
• Packaging dimensions (HxWxD): 140x670x590 mm
• Aperture dimensions (HxWxD): 560x490 mm
• Mass: 12.5 kg
• Weight with packaging: 13.5 kg

Is there any other ways I can utilize it in HDB?

Edited September 26, 2015 by tianzui