Jump to content
Find Professionals    Deals    Get Quotations   Portfolios
Sign in to follow this  
AirconCiti

AirconCiti - Your One Stop Aircon Solution

Recommended Posts

Hello,

Can you quote me for 4 room BTO.

Looking for System 4 inverter for my 3 rooms and 1 living room,  please quote me Mitsubishi Electric Starmex (2 & 5 ticks), living room may consider 12K and 18k  BTU.

Kindly include GST,

 -installation (2 times installation)

 -1/2" Armaflex class "0" insulation

 - G22 copper pipe

 -16mm drainage

 -additional cost for any length of pipe used for installation?

 -warranty (parts and installation)

Breakdown the cost if possible for comparison. Thanks you!

 

Share this post


Link to post
Share on other sites

Join 46,923 satisfied homeowners who used renotalk quotation service to find interior designers. Get an estimated quotation
22 hours ago, huggermonster said:

Hi Eva,

I am not sure which system configuration to get. Will need recommendation. Will like to install aircon for my 3 bedroom and one living room. Living room abt 35sqm(so is 18kBTU enough?) For bedrooms looking at  2X 9k BTU and 1X 12K BTU. Please give me a quote based on various brands/models and the type of piping etc. Thanx.

Hi huggermonster,

Thanks for your enquiry.

I've just PM-ed you the quotation. 

Please do not hesitate to contact me if you have further clarifications. 

Have a nice day! 

 

Eva 

67558255 / 96758255

 

Share this post


Link to post
Share on other sites
2 hours ago, Alvincheng said:

Hello,

Can you quote me for 4 room BTO.

Looking for System 4 inverter for my 3 rooms and 1 living room,  please quote me Mitsubishi Electric Starmex (2 & 5 ticks), living room may consider 12K and 18k  BTU.

Kindly include GST,

 -installation (2 times installation)

 -1/2" Armaflex class "0" insulation

 - G22 copper pipe

 -16mm drainage

 -additional cost for any length of pipe used for installation?

 -warranty (parts and installation)

Breakdown the cost if possible for comparison. Thanks you!

Hi Alvincheng,

Thanks for your enquiry.

I've just PM-ed you the quotation. 

Please do not hesitate to contact me if you have further clarifications. 

Have a nice day! 

 

Eva 

67558255 / 96758255

 

Share this post


Link to post
Share on other sites

Hi, can you please quote me for the following?

Mitsubishi Starmex Model: MXY-4A28VA / MSY-GE10VA X3 + MSY-GE24VA (2 ticks model)

Requirements:

- materials: G22 copper coil, 1/2" Armaflex class "O" insulation, 16mm PVC drain pipe with armaflex insulation, 3 core 40/70 Keystone control wire

- others: 2 trips installation, dismantling & disposing of existing system 3 air-cons

- work with my ID on the required works

Thanks.

 

Share this post


Link to post
Share on other sites
11 hours ago, bunnybluey said:

Hi, can you please quote me for the following?

Mitsubishi Starmex Model: MXY-4A28VA / MSY-GE10VA X3 + MSY-GE24VA (2 ticks model)

Requirements:

- materials: G22 copper coil, 1/2" Armaflex class "O" insulation, 16mm PVC drain pipe with armaflex insulation, 3 core 40/70 Keystone control wire

- others: 2 trips installation, dismantling & disposing of existing system 3 air-cons

- work with my ID on the required works

Thanks.

Hi Bunnybluey,

Thanks for your enquiry.

I've just PM-ed you the quotation. 

Please do not hesitate to contact me if you have further clarifications. 

Have a nice day! 

 

Eva 

67558255 / 96758255

 

Share this post


Link to post
Share on other sites

Need 2 quotations - TYPE HDB and BTO

Looking for System 4 inverter  for my 3 rooms and 1 living room,  please quote me Mitsubishi Electric Starmex (2 & 5 ticks), living may consider 12K and 18k  BTU.

Kindly include GST,
-additional cost for any length of pipe used for installation?
-warranty (parts and installation), etc....

Breakdown the cost if possible for comparison. Thank you.

Jason

 

Share this post


Link to post
Share on other sites

Hi Jacob,

Thanks for your enquiry.

I've just PM-ed you the quotation. 

Please do not hesitate to contact me if you have further clarifications. 

Have a nice day! 

 

Eva 

67558255 / 96758255

 

Share this post


Link to post
Share on other sites

Hi Eva,

Please quote for System 4 Mitsubishi Electric Starmex (2 and 5 ticks). 5 room BTO, Bedrooms 9k BTU, Living 18k BTU.

Kindly include GST,
 -installation (2 times installation)
 -1/2" Armaflex class "0" insulation
 - G22 copper pipe
 -16mm drainage
 -additional cost for any length of pipe used for installation?
 -warranty (parts and installation)

Thanks

Desmond

 

Share this post


Link to post
Share on other sites
59 minutes ago, desmtooh said:

Hi Eva,

Please quote for System 4 Mitsubishi Electric Starmex (2 and 5 ticks). 5 room BTO, Bedrooms 9k BTU, Living 18k BTU.

Kindly include GST,
 -installation (2 times installation)
 -1/2" Armaflex class "0" insulation
 - G22 copper pipe
 -16mm drainage
 -additional cost for any length of pipe used for installation?
 -warranty (parts and installation)

Thanks

Desmond

Hi Desmond,

Thanks for your enquiry.

I've just PM-ed you the quotation. 

Please do not hesitate to contact me if you have further clarifications. 

Have a nice day! 

 

Eva 

67558255 / 96758255

 

Share this post


Link to post
Share on other sites

Hello,

Can you quote me for 5 room BTO.

Looking for System 3 inverter for my 3 rooms,  please quote me Mitsubishi Electric Starmex (2 & 5 ticks).

Kindly include GST,

 -installation (1 time)

 -1/2" Armaflex class "0" insulation

 - G22 copper pipe

 -16mm drainage

 -additional cost for any length of pipe used for installation?

 -warranty (parts and installation)

Breakdown the cost if possible for comparison. Thank you!

   0
 

Share this post


Link to post
Share on other sites
11 hours ago, slickkon said:

Hello,

Can you quote me for 5 room BTO.

Looking for System 3 inverter for my 3 rooms,  please quote me Mitsubishi Electric Starmex (2 & 5 ticks).

Kindly include GST,

 -installation (1 time)

 -1/2" Armaflex class "0" insulation

 - G22 copper pipe

 -16mm drainage

 -additional cost for any length of pipe used for installation?

 -warranty (parts and installation)

Breakdown the cost if possible for comparison. Thank you!

   0

Hi slickkon,

Thanks for your enquiry.

I've just PM-ed you the quotation. 

Please do not hesitate to contact me if you have further clarifications. 

Have a nice day! 

 

Regards,

Eva 

67558255 / 96758255

 

Share this post


Link to post
Share on other sites

Hi ,

Please quote the following for 5 rm BTO which I like to air con 3 bed rooms, 1 study room, 1 living room.

MITSUBISHI SYS 3 - INVERTER (2 ticks)
MXY3A28VA
MSYGE10VA x 02
MSYGE24VA  x 01

MITSUBISHI SYS 2 - INVERTER (2 ticks)

MXY2E20VA
MSYGE10VA x 02

- installation 
- 1/2" Armaflex class "0" insulation
- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation
- Cables – 4C40,4C70 with PSB Tested
- PVC Trunking – minimum 2mm thick
- additional cost for length of pipe used ?
- warranty (parts and installation)

Thanks

 

Share this post


Link to post
Share on other sites

Hi there,

I will like to get quotation for myself and my friend's house below:

Quote 1 - Landed Property 
Panasonic single split - CU-XS9RKZ (new model, 9000 BTU)
- 1/2" Armaflex class "0" insulation
- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation
- Cables – 4C40,4C70 with PSB Tested
- PVC Trunking – minimum 2mm thick

Quote 2 - HDB
Panasonic system 2 - CU-2XS18RKZ (new model, 2 x 9000 BTU)
- 1/2" Armaflex class "0" insulation

- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation
- Cables – 4C40,4C70 with PSB Tested
- PVC Trunking – minimum 2mm thick

Questions
For survey, is it available on weekend or after 6PM?
Is installation available on Saturday?

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×