3room B&L's Humble Peaceful-Hippie 65sqm Abode

[blueygirls 0]

HOW TO SAVE ANOTHER $200 ON RENO

So.... we decided to do the floor protection ourselves. I mean, honestly, why not? Looking at all the Americans building their own kitchen cabinets and doing so much more, i thought why can't we just do this little bit? Also guys, its because i'm unemployed at the moment, looking for a job, so i'm more free  My contractor told me that it can be quite tiring and back breaking, but I thought why not just give it a shot. 

HERE COMES SURPRISE #1.. We actually bought the 2 rolls of cardboard protection and kept them in the flat(you can get from horme hardware online, i just got from my friendly neighbour who runs hardware shop below) .. and guess what  The vinyl guys helped us to lay the protection for most of the rooms and hall! SO SWEET OF THEM!  

We only had to lay the common room, a bit more of the living room and the doors! It was very fulfilling actually, and the best part it took about 30 mins only!  AND YES, the savings of $200 is after including the cost of 2 rolls of corrugated cardboard rolls + masking tape + 6 seater grab transport to my new BTO! Why 6 seater grab? I thought the thing would fit in a normal cab, but nope! lol.. Thats why I suggest about just buy from an online shop and get them to deliver better.. Can still save a lot! Just have to be careful that when you cut the cardboard you bring it away from your vinyl floor and cut it (watch at 2 min mark to see what I mean) 

BTW, this is so strange.. but do you know what I find more satisfying than popping bubble wrap?! STEPPING ON CORRUGATED CARDBOARD!  Your feet just sinks in ... haha.. I don't know how to describe it. Does anyone know what I'm talking about?!  

 

[blueygirls 0]

2D DRAWINGS

So these are the 2D Drawings, I've received, which also shows my laminate choices .. but i'll do a separate post on laminates later as well. 

I'm not too sure yet if these are the 2D Carpentry Elevations .. it doesn't seem detailed enough to be..What do you guys think?

Of course, easier for me to just ask my contractor if these are the 2D drawings, but if i do that now, the previous 4 comments, pending an answer may be ignored  

Oh yeah.. ignore the study table and the handles, because I removed that one and I bought special handles from ezbuy, which I listed in my previous post.

Edited March 1, 2019 by blueygirls

[shizzyrir 0]

On 2/26/2019 at 5:53 PM, blueygirls said:

So here are the appliances I have bought so far.. TOTAL DAMAGE = $2800

 

1.)  OVEN: BOSCH HBF113 ($7XX), so far the best price i've gotten.. i got it from Harvey Norman at Parkway Parade, do look for Bruce (9765 4741) .. I just want to say that I really like Harvey Norman, if they cannot match your price, they will refund you the deposit you put in.Tried and tested... Real honesty you can get there. 

Decided to just go for an entry level one, by Bosch because: 1.) EVERYBODY is buying bosch oven .. I managed to get a very good price also, I compared to Everjoint, Goh Ah Bee etc.. Turns out GAINCITY Sungei Kadut was a waste of my time!!  Went ALL the way down there, and their price was $1xxx for this, even after I mentioned that I managed to get ard $800 elsewhere! Rinnai hob also MORE EXPENSIVE! 

2.) Heater: 707 PRINCETON ($25X) Harvey Norman
If you're looking for an instant heater , GO FOR 707.. My house has this old 707 heater, and its worked for the past 20 years!!!  Decided to go for Champagne color.. It looks a bit different in real life. 

 

3.) Hob: Rinnai RB-93-US ($4XX) From Hoe Kee at Tanjong Katong

I was seriously confused about the hobs.. At first I wanted to go for 30cm domino induction + 60cm stainless steel gas.. but the price also $$$ and will have less space for my kitchen drawers.. 

Between Bosch hob and Rinnai hob, I decided to choose Rinnai because I think its more suitable for asian cooking and it has a stronger flame. Between Rinnai Hyperburner series and Innerburner series... I went for Hyperburner in the end..  Reason being.. the Inner burner series for Rinnai, is not completely sealed off.. Yes, there is a collection cup inside for things that overboil, but if you overboil more than the cup can collect?! then HOW?! I just think its mafan to clean lah.. 

 

4.)  Sink: Blanco Naya 6 ($350++..can't remember exact price) Hoe Kee

So me being the "resourceful" person I am, I thought since its from UK can get it cheaper from Eurohomedirect.. they quoted me $700+ and said that if Hoe Kee is really selling at this price, its really cheap and should buy from them! They also told me that Blanco is the #1 brand for kitchen sinks.. Personally, I would skip Carysil since its not that much cheaper than Blanco also.. and I believe Blanco is far superior and it doesn't have the red color "Carysil" logo on the sink. So you heard it here guys, Hoe Kee is the CHEAPEST for Blanco. I spoke to them and they said its because they really import a lot of it so they can afford to sell it cheaper. 

5.) Hood: Telescopic Tecno TH 913 T ($25X i believe) Hoe Kee

Believe it or not, I've NEVER used a hood in my entire life..  

I mean, I have it in my mother's kitchen, but its just there, we have never switched it on.. The only reason its there is because the previous owners put it in  

I decided to get one this time, just to protect the cabinets in case.. But decided to go with a telescopic one because I'm not used to having the hood there in my face while i'm cooking  

Decided to go with Tecno because Turbo and Bosch is more expensive, because Fujioh is even MORE EXPENSIVE .. and because this Tecno one doesn't really take up so much space in the cabinet, and it is reasonable 

 

6.) Fridge: Panasonic 6 door, ($480) 2nd hand from Carousell 

When I saw the Hitachi and Mitsubishi 5 door and 6 door fridges, i fell in love.. ... BUT I DID NOT FALL IN LOVE WITH THE PRICE  2K-3K   

I decided to be patient and source for a 2nd hand one.. so happy I got a Panasonic one because a sales man at Harvey Norman told me that actually Mitsubishi fridge uses Panasonic technology... and Hitachi one has nano filter lah.. which i'm not really comfortable using..

I really like the idea of bottom freezer, top fridge.. because you normally open the fridge more often than the freezer so it makes sense to have it at eye level  But most of the top fridge, bottom freezer fridges, to get to the bottom freezer you need to open the door, THEN pull out the drawer.. WASTE TIME LAH! 

7.) Fans: Vento Fino 2 ($330+) , Crompton 33cm fan ($23 LOLOLLL ) 

I was thinking whether I should list both the fans or not... because the 2nd fan i've listed is only available in India, but ITS THE BEST FAN ON EARTH !  Don't be fooled by its small size, its really REALLY powerful! When I spoke to my aunt recently to ask for which fan to buy, she said the best ones are actually from India... and the price is . The size is perfect also to fit into small areas, or if you want to have 2 fans in the living room.. a small one to cover the dining room, but to still have space for pendant lights.. 

 

Vento Fino 2.. just get it from Malaysia lah.. Over here they are selling it for 3x the price.. its RIDICULOUS 

 

As for the washing machine, main living room fan etc.. I haven't decided yet lah.. I think once all the light fixtures are in I can estimate what size fan to get then. 

 

hi! able to share where to. purchase the fans and what exactly the vinyl brand u choose. 

Edited April 14, 2019 by shizzyrir
Edit email

[Sgframes Barakkath 0]

Dear ID,

Congrats.
If you want to make any Glasses for Your Table Top, Do contact us. We deal

·         Tempered Glass

• ·         Clear Glass

• ·         Frosted Glass

• ·         Window Glasses

• ·         Spray Painted Opaque Glass

• ·         Tinted Transparent Glass

• ·         Oval or Round Glass

• ·         Kitchen Backsplash Glass

Amazing Service with Affordable cost.
Thanks and Regards
Raju
https://SGFrames.com
Cont: 6635 7989 / 9451 7174

info@sgframes.com

[hdb4ever 3]

@blueygirls Am eagerly looking forward to more updates!

[shizzyrir 0]

Yeap I'm waiting for updates as well

[Syukur 1]

On 1/29/2019 at 12:57 AM, blueygirls said:

ok so guys.. here comes my first proper post.. Trust me when i said, I really met A LOT OF IDs/Contractors. Also I think I will be providing some new insights to some of you who are long time readers of renotalk.  So here it goes.. 

IDs (PART 1) 

1.) S***n from T** I*****or L** (dropped)

This was the first ID i met in my search, and when i arrived at TIL (oops.. i guess i gave the name away haha) , i realized he just woke up . Anyways, i'm patient so its ok I waited. He seemed to know his stuff, and could give good advice. Also his home is **** BEAUTIFUL ok!! I told him at the end of the meeting by budget was 20k, and he said it may be hard to meet it. I had to chase a few times for the quote, and when it came back it was 10k + OVER MY BUDGET!  Anyways, nevermind I had a second meet up, and told him to revise, but soon after he went MIA. What a shame, because when I apologized for wasting his time since he had to do a second quote, he did tell me that its normal to go through several quotes before signing.. so I thought that was reassuring. 

2.) S*e*en from H** C**n*ept ID (shortlisted and would recommend)

So while getting INSpo from INSta, i came across this man's IMPRESSIVE hand-drawn sketch of a living room/kitchen. Its amazing really! Can say its like a B&W 3D drawing PMed him and we met up at the studio soon after. Very very nice, polite guy. He had quite a few suggestions to give as well, and he was prompt in following up. Price is very reasonable for ID and his sketches are TOP NOTCH. He gets back to you VERY FAST as well.  Below is just an example of what he can do !  

3.)  Sh** L* from J*s***s ID (dropped)

Got to know about this contact through facebook. Also another nice, polite fellow. I think prices are ok. I've seen his past projects, and if you want something really bold (like whole house many shades of blue, or all marble theme) maybe hes the guy to look for. There was one carpentry product that I wanted to fabricate : basically a low dining table cum sofa with storage .. the quote for that came to 4.8K.. For one item lol. The rest of the quote was reasonable. So anyways, I asked to revise the quote and send to me first before I came to his studio , but he never reverted back. 

4.) Ric & Nick from Renoguyz 

No point concealing this one lah. & YES, THEY ARE IDs not contractors!!! HAHAHA. Who is Ric?! Told you guys I'd have some new info lol. I asked Nick, how come nobody mentioned anyone else, and they always say contractor.. he said IDK.  So I've seen some people on this forum say sometimes Nick won't do certain stuff because he thinks its impractical etc. It comes from a good place lah.. BUT.. BUT.. with RIC in the picture, the brainstorming starts and new ideas come out to solve the nicks n kinks in the previous idea. I say this so many times already... but Ric is reaaaaaally soft spoken. He checks up often as well.  Quote is reasonable as well. ON THE SPOT QUOTE. POWER  Unfortunately, I chose not to go them because I wasn't sure if they could do boho designs. Their designs are plain and simple, which is not a bad thing, but i like complex LOL. 

5.) Melvyn and Cornelius Contractor (I mainly dealt with Melvyn)

How I met this contractor is a long long story, but here is the short one: someone from Facebook group A recommended Melvyn, I was in contact with a Melvyn from my own housing estate group.. and I found out much later that they were one and the same !  This person from Facebook group A, recommended Melvyn because their previous ID was horrible and so they let Melvyn take over. So... I've seen TWO of Melvyn's done up houses, and I managed to speak to one of the home owners, and they are very very impressed and happy!  So ya, i did completed reno project visits, before seeing the quote. lol. I know for a fact that Melvyn goes OUT of his way to help and is VERY responsive.. usually more responsive than the contractor I chose . I'm not sure about his pricing though because after new years, we rushed and made our selection, and did not have a chance to see their quote. Go for this person if you want a contractor with design sense. If you're nice to him , he can also share with you a lot of lobangs from Malaysia  

In hindsight, I regret not taking more time to make my decision.. because I would have considered Melvyn, and ID 2 & 4 above more seriously. Part of the reason why we did not take our own time to make our decision is because of the experience below.

6.) G** L**ng from Ab***o*k (dropped, but would recommend to others with a midrange budget)

Don't get me wrong from the paragraph above, my experience with this ID was ABSOLUTELY AMAZING. The price was I would say , mid-range and reasonable for an ID, but slightly over our budget. Budget was our priority because we had a really tight one. Out of ALL the IDs, our "telepathy" and communication  with this one was THE BEST (excluding my neighbour contractor of course). Give you one example: For the platform bed, I said, I want the one where it is flat and then you push and a handle comes out.  SUPER VAGUE.. and yet, he said "this one?" AND IT WAS EXACTLY the one I had in mind.   We told him repeatedly we loved his ideas, which were fresh and almost no other ID offered us these ideas!!     So since we were getting along SPLENDIDLY, this ID thought that we were really happy and ready to sign, which I completely understand.. and that was why when we said no because of the price, he seemed genuinely dejected. So then, my fiancee got upset at me lah.... since he thought i'm a heartbreaker LOL. He said "we cannot do this again.. we meet someone, tell them we like everything and are amazed.. then we turn them down". He also thought that once you meet with an ID, after second meeting you must sign.. I told him the process can be a lot longer than that!! TDLR: we felt bad for making this ID dejected after giving so much praise, and we did not want to "lead people on".. 

Also, I 100% recommend this ID if you have a mid-range budget and want an ID with NEW and innovative ideas! The only reason we eliminated them so early is because their budget was not as cheap as the rest. They were not very expensive actually, cheaper than ID 1.

Hi.. 

 

Good day to u. 

Mind if i can have Melvin contacts pls? 

[ruberstamp 0]

Hi can I have Melvin contact?