Jump to content
Find Professionals    Deals    Get Quotations   Portfolios
Sign in to follow this  
Justsomemagic

STAY AWAY FROM UGATE

Recommended Posts

U gate did my windows. Very poor job.
Firstly delayed installation, after installation obviously not done well, windows make such a loud rattling noise because loose panels. Now won't even come to rectify their problem untill i make final 10,% payment. Already paid 90%. Really **** standard man. I think they also didnt install the black rubber stopper. Knn expect me to lan lan pay 10%. No way in **** man.

 

Share this post


Link to post
Share on other sites

Join 46,923 satisfied homeowners who used renotalk quotation service to find interior designers. Get an estimated quotation

Replying here as I had some issues too.

I have a really bad experience with this company, U-gate Design PL.

My windows and grilles were installed in mid February 2020. But one month later, I am still chasing them for a solution to my windows problem. To be honest and objective, the slim grilles have no problem.

I had been following U-Gate Design PL on their FB page and was keen on their slim grilles. They looked quite credible as they claimed they had registered patents for their grilles and were always mentioning/hash-tagging BCA and HDB in their posts. Only a company looking to build up a reputation would do so. The FB reviews were also quite good, but now, they have been switched off, so I am not able to check back or post there. 

I had done my search online for other reviews and there are at least 2 documented bad reviews, and I chanced upon this thread today, so mine would be bad review number 4. I didn't think I would be so unlucky, or how badly will a windows and grilles job be done.

I had asked for a quote and one of their staff was sent to take measurements. The next day, the owner, Mr Goh called back and made it a point to talk about safety while discussing the type of windows and grilles I had in mind. Of course that impressed me and I kept it in mind while shortlisting other contractors. He also mentioned that I might have a rain water leaking problem for my kitchen windows. I told him the ledge above protrudes out quite a bit and shouldn't be a problem for my windows, Thinking back, this should have been a trigger for me to be careful, most likely it is a problem they face with other customers. 

My requirement was for 4 track sliding windows for living room and kitchen, 3 tracks for 2 bedrooms and casement windows for master bedroom. The grilles were their patented double track slim grilles. They had to outsource for the 4 track sliding windows to another supplier as U-Gate only had 3 sliding tracks for 3 big windows. I didn't want big windows.

My house is a 4NG HDB flat and I was only doing a windows and grilles job. I have lived in houses with both casement windows and sliding windows. Casement windows do a good job of blocking noise when closed. Sliding windows need to have morhair at their bottom edge to block out dust, noise and wind howls. I always thought the morhair was to block the dust, but now I understand that it is also meant to block as much wind as possible.

They did not bring anything to protect my tiled floor and just spread out all the metalwork. I was surprised and waited a while but they continued working. Luckily, I had some old cardboard boxes which I took out and told them to place on the floor and then work with the grilles etc, barely had enough.

Apparently, they had brought the wrong windows for the living room and kitchen and 2 of their staff began arguing, another bad sign. So one went back to the factory and brought another set of windows. I managed to do an inspection round and caught a few issues with the same windows and they corrected it. Made payment in full when they left. 

My horror began the next few nights (same night I was too tired after the cleaning). I have no blockage for my living room and adjoining bedroom, so the wind can be very strong at times and blow for hours. When I closed the windows at night, the wind howls very badly through the gaps at the bottom of the windows. So first thing I did was check the windows and see if there is something wrong. Then I went online to find out what was happening. The wind will blow through any window gap and can have different frequencies. And there were some solutions depending on what kind of windows you have.

I called up the admin, they sent another staff who understood the noise through the gaps was an issue. He went back and nothing happened. Then I chased the owner and he returned my call. Mr Goh started arguing that the windows don't shake and no one else has a problem. When I checked one of the online reviews again, the customer had complained that he had ended up with loose and shaking windows, so that's what I had to listen to while keeping my anger and frustration in check.

I have a whatsapp chat with him and since he was arguing too much on the phone and wouldn't listen to me describing the problem, I typed it all out the next morning. He had basically refused to acknowledge the actual problem, although he says he has been in the industry for 35 years. He said he would look for a solution from his supplier. He arrowed them for the problem, when in fact, his own 3 track sliding windows also had the same gap problem through which the wind howls. He also said not to put the hope on him for the solution.

U-Gate and Mr Goh have chosen to ignore me, thinking I will just keep quite and go away. They also promised guarantees and warranties but no action yet. The windows have a basic design flaw if their windows cannot accommodate the morhair or insulation seals. So what is the point of taking out patents when they can't even get their basics right?

This review is meant for other people to think carefully before engaging with this company and parting with their hard earned money. I will look into my available options to get some action taken and fix my wind noise problem. Will update again if U-gate will fix my problem or not.

 

Share this post


Link to post
Share on other sites
On 3/14/2020 at 1:48 PM, Ykhan said:

Replying here as I had some issues too.

I have a really bad experience with this company, U-gate Design PL.

My windows and grilles were installed in mid February 2020. But one month later, I am still chasing them for a solution to my windows problem. To be honest and objective, the slim grilles have no problem.

I had been following U-Gate Design PL on their FB page and was keen on their slim grilles. They looked quite credible as they claimed they had registered patents for their grilles and were always mentioning/hash-tagging BCA and HDB in their posts. Only a company looking to build up a reputation would do so. The FB reviews were also quite good, but now, they have been switched off, so I am not able to check back or post there. 

I had done my search online for other reviews and there are at least 2 documented bad reviews, and I chanced upon this thread today, so mine would be bad review number 4. I didn't think I would be so unlucky, or how badly will a windows and grilles job be done.

I had asked for a quote and one of their staff was sent to take measurements. The next day, the owner, Mr Goh called back and made it a point to talk about safety while discussing the type of windows and grilles I had in mind. Of course that impressed me and I kept it in mind while shortlisting other contractors. He also mentioned that I might have a rain water leaking problem for my kitchen windows. I told him the ledge above protrudes out quite a bit and shouldn't be a problem for my windows, Thinking back, this should have been a trigger for me to be careful, most likely it is a problem they face with other customers. 

My requirement was for 4 track sliding windows for living room and kitchen, 3 tracks for 2 bedrooms and casement windows for master bedroom. The grilles were their patented double track slim grilles. They had to outsource for the 4 track sliding windows to another supplier as U-Gate only had 3 sliding tracks for 3 big windows. I didn't want big windows.

My house is a 4NG HDB flat and I was only doing a windows and grilles job. I have lived in houses with both casement windows and sliding windows. Casement windows do a good job of blocking noise when closed. Sliding windows need to have morhair at their bottom edge to block out dust, noise and wind howls. I always thought the morhair was to block the dust, but now I understand that it is also meant to block as much wind as possible.

They did not bring anything to protect my tiled floor and just spread out all the metalwork. I was surprised and waited a while but they continued working. Luckily, I had some old cardboard boxes which I took out and told them to place on the floor and then work with the grilles etc, barely had enough.

Apparently, they had brought the wrong windows for the living room and kitchen and 2 of their staff began arguing, another bad sign. So one went back to the factory and brought another set of windows. I managed to do an inspection round and caught a few issues with the same windows and they corrected it. Made payment in full when they left. 

My horror began the next few nights (same night I was too tired after the cleaning). I have no blockage for my living room and adjoining bedroom, so the wind can be very strong at times and blow for hours. When I closed the windows at night, the wind howls very badly through the gaps at the bottom of the windows. So first thing I did was check the windows and see if there is something wrong. Then I went online to find out what was happening. The wind will blow through any window gap and can have different frequencies. And there were some solutions depending on what kind of windows you have.

I called up the admin, they sent another staff who understood the noise through the gaps was an issue. He went back and nothing happened. Then I chased the owner and he returned my call. Mr Goh started arguing that the windows don't shake and no one else has a problem. When I checked one of the online reviews again, the customer had complained that he had ended up with loose and shaking windows, so that's what I had to listen to while keeping my anger and frustration in check.

I have a whatsapp chat with him and since he was arguing too much on the phone and wouldn't listen to me describing the problem, I typed it all out the next morning. He had basically refused to acknowledge the actual problem, although he says he has been in the industry for 35 years. He said he would look for a solution from his supplier. He arrowed them for the problem, when in fact, his own 3 track sliding windows also had the same gap problem through which the wind howls. He also said not to put the hope on him for the solution.

U-Gate and Mr Goh have chosen to ignore me, thinking I will just keep quite and go away. They also promised guarantees and warranties but no action yet. The windows have a basic design flaw if their windows cannot accommodate the morhair or insulation seals. So what is the point of taking out patents when they can't even get their basics right?

This review is meant for other people to think carefully before engaging with this company and parting with their hard earned money. I will look into my available options to get some action taken and fix my wind noise problem. Will update again if U-gate will fix my problem or not.

I contacted them in june to do up grilles for my flat. just simple measurement only delay until end of july still never come up. keep on giving stupid excuses like car spoil, guy cannot make it, etc.

lucky chose to ignore them and found another contractor who do up much faster at similar price.

AVOID them if you CAN!

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×