wellknown

Hi I believe that you are referring to cove light for your dinning area. My suggestion to you is do not use Led strip and use led T5 Led tube which is much brighter and better value for money. However, if you insist on using led strip, you should get those 5050 led strip using Epistar led. Typically a high end led strip is about $12 to $13 per meter and the cheap one is $8 per meter. 5050 led strip is consuming 14.4W per meter. However, you still need to buy led driver. When you size your driver, you need to allow 20 percent allowance to prevent driver over heat. Example, your total wattage requirements is 80W, then you should get 100W driver. As driver are electronic product, the product life span reduce drastically when you load it to max capacity which cause it to constantly run at high temperature. Recommended led driver brand is mean well. a 200W mean well driver is about $70. Do PM me if you need any other help. Well-Known

Hi You can contact my regular tiler directly, Ah Seng, 98003280. He employs his tiler directly, Malaysian. Not sub contracting his work out. I used him for my past three apartments. Thanks and Regards YF Lee

Hi Is there a warranty on your LED lights? If yes, you might want to go back to supplier. Likely, it is due to the led driver. Thanks and Regards YF Lee Well-Known.

HI It will be much cheaper to use T5 Led tube for cove lighting unless you want special lighting colour or effect. Yes, LED strip 5050 power requirement is 14.4W per strip. typical a 5M LED strip will require 72Watt and in order not to over load the driver, you have to cater 20% buffer, that mean, you us 86.4 Watt driver for 5 Meter strip. The driver, I recommend that you use Mean well driver which is the top driver in market. Very reliable which we use a lot for projects. Price for 200W mean well driver is about $60. For your 25M led stripe, you will need a two no of 200W driver and one 100W driver. Hope this clear your doubt. Thanks and Regards YF Lee Well-known.