Skip to content
View in the app

A better way to browse. Learn more.

RenoTalk.com ™

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

w7_lee

Members
  • Joined

  • Last visited

Everything posted by w7_lee

  1. I'm at my new home for 8 months and permanently resolve the mould problem for 6 months. So just to share with you guys & gals... For the silicon between the sink & wall, remove it. Use white cement instead. The sink would be bolted to the wall, so the silicon & cement is only to fill in the gap, no value adding reason. Any mould growth there is unavoidable since this area will get wet. With cement, you can brush it off with a used toothbrush (or mould remover agent). For the mould growing IN THE silicon between the glass showerscreen and the aluminimum lining on the floor. You will have to remove the moulded silicon. By applying fresh silicon, the mould will grow back in time. I could not find any good suggestions in all forums and found a permanent fix myself. I know the eye-sore, so do try it & share it with around if you feel it works. First thing to do is you need to identify how much space is available between the internal aluminimum lining & the glass showerscreen once the old (moulded) silicon is removed. For reference: the total internal width of my aluminimum lining is 18mm, glass is 10mm thick, so I have an 8mm gap to fill with silicon. Then, make your way down to Towner Road Blk 101. There is a shop there (G****N Pte Ltd) that specialise in rubber products. Purchase from them the Silicon Strips. These are silicon but pre-moulded in the factory. Unfortunate is that standard width is 10mm, depth can be cut to our specs. You need to pre-order and they are not cheap (but worth it). Once you collect the strips, remove the moulded silicon (clear as much as you can the residuel silicon in the alumininum linings) and squeeze in the strips to take it's place. 1 thing to note is that silicon is compressible but nobody know how much to compress. If we to overcompress, the glass may crack during expansion (hot shower) or accidental knocks on the glass. For my 8mm gap, I ordered 10mm wide strips and compress the silicon by 2mm. So far, there's been no issue & I have a 2 Y.O. toddler that bath (and play) there. I don't know if any contractor will do this for you. I D.I.Y myself.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.