bigbull

Hi Tootiesiang, My fan is a HAIKU Composite Kutoku and it bought it at the following address: UNIVERSAL UNION 710 Geylang Rd Singapore 389625 Tel: 6749 0007 You need to pre-order early if you are interested because it is in demand. For the electrical wiring, the contractor cut grooves on the ceiling and laid the cable in it. You can refer to the first page of this t-blog to see it. It is a super dusty and super messy job. Hope it helps. Bigbull

Hi RenoJoy, To be honest, I haven't cleaned it yet. It is still looking good and I would probably use a vacuum cleaner and change the regular head to a brush and clean it. It should suffice. Bigbull

Hi KopiKia, I got it from Logan's and it cost me $1800. This is a customized piece. Here is the address. 100E Pasir Panjang Road Century Warehouse #01-02 Singapore 118521 Hope it helps. Bigbull

Hi Kelhy, Sorry for the super late reply. This is the picture. What you described is correct. Is it still neat? My AV Receiver is Marantz NR1602 and it cost $1400+ with the 5:1 JBL Speakers. Do check if the AV receiver can pipe all the picture and audio from the different players to the TV. The newer ones should have no problem but please do a bit of research on this. I am not really into the AV system so I can't advise what system to go for. Hope it helps. =) Bigbull

Ya, alternatively, you can paint over it?

Hi Kelhy, Here's the picture. I have a AV receiver, a X-Box, a Blu Ray player and a CPU on the other side. Basically, I have a multiplug running to each of the cabinets on the sides. I got Logan to bore a hole that is big enough for it to run through. After that, I had all the equipment to connect to it for power. For all video and sound, the Blu-Ray, X-Box and CPU are connected to the AV receiver and I just have 1 HDMI-cable going out from the cabinet from the Av Receiver to the TV. Hope you are not confused. Bigbull

Hi Eustoma, My contractor did the way you mentioned and yes, there is some slight and small cracks on the white cement but you got to take a close look in order to see it. Most people paint a layer of white paint over it (That should cover up the cracks), but I chose to leave it in the orginal state. I like it the way it is. You can refer to the FIRST page of this T-Blog for a better view. Hope it helps. Bigbull

Hi Ynas, Sorry for the late reply. I got my louvre doors from my Kelvin Tee, my contractor. It is $1200 (equal lift) with spray painting. I found **** doors that provide the louvre doors at the same price but the painting is painting with brush and they don't do equal lifts on metal frames. Hope it helps. Bigbull

Hi Justin, Haha Maybe you should check with him why cannot use... I painted only one side. The rest are normal paint.

Hi Justin, I bought my Chalkboard paint at SELFIX. You can google them for the different locations. The brand is RUSTOLEUM Specialty Chalkboard. BEWARE: They come in BLACK and GREEN so keep a look out. I am using the green one. Bigbull

Hi Sappyd, I bought my Eames Dining Chair from LUSH LUSH at $99 each. It was during their sales. I think the original price is $110. My is made of plastic. Other places include but not limited to: Comfort Design (Plastic): They called it another name and its slightly more expensive than LUSH LUSH. Picket and Rail (Fibre Glass) : About $300++ for one but the feel is really different. You can also find the fibre glass ones in TB and I suggest you go to theitysbit's T-blog to search for it. Hope it helps. Bigbull

Hi Bleucheeze, Ceiling/pendant lights got no plugs so its safe. 65daiguo acts as the middleman between you and the supplier. In the event that you received a defective goods, they will contact the supplier and liase on your behalf. In my opinion, it saves a lot of work on my side should something goes wrong. The worst scenario is when the supplier don't honour their goods, then they can't do anything. But it hasn't happen to me. They have been relatively prompt in following up with my cases. Bigbull

Hi Justinyeo, Some TB stuffs are really good but in the case of the TOLOMEO lamp, its pretty flimpsy... Order early! Now that my reno is completed. Been thinking if it would be better if I have chosen the red brickwall instead. kekeke But anyway, best wishes in your reno! Bigbull

Hi Bleucheeze, Do try to make the purchase from TB a few months earlier coz you need some leap time to react if they are any defects. Also, some standalone lights i.e. standing light, table light etc... comes in China plugs so you may need to get an adaptor or simply DIY by cutting the existing plug away and replace it with a standard 3-pin plug. Bigbull

Hi Z3phy, PMed.

Bleucheeze, I must say that the TOLOMEO lamp that I bought is not of high quality (But look very decent) so when I try to attached a G5 Led Corn light (significantly heavier than a incandascent), the swing arm gave way. Lighting from TB can be use locally. No worries at all! Bigbull

Hi Justinyeo, My brickwall is about 5 meters. You are referring to the TOLOMEO Lamp right? Sad story... The Swing Arm snapped and I am now trying to get either a replacement or refund from the manufacturer. I bought it at from TAOBAO via the local agent here, 65daiguo. I tried to fix an energy saving bulb but I think its weight coz the swing arm to give way. Apparently, it can only take the weight of a incandescent bulb. You need the link? I need to dig it out. Happy and Blessed 2013! Bigbull

Hi Jasdy, Thanks for your valuable feedback. Best wishes in your renovation!

Hi Kelhy, I bought it at MOMOYOYO @ Plaza Sing for $399. Quality wise, I think it is quite solid. I put my younger son on it and it is very stable. Just need to be extra careful coz the finishing got sack cloth so you don't wanna spill coffee on it. Hope it helps. Bigbull

Hi, Just realised you have a t-blog so i thought i re-post your query here. Best wishes in your reno! Bigbull

Some Fun and Laughter. The precious things in life. My babies having fun. I'm Here!

These are some of the last few photos posting I have. (Coz nothing to post le. ) The Kitchen The Living Room The Walkway Common Toilet MBR and Toilet

Hi Cootie, I bought the digital locks (SHS5230 and Gateman F10) from Interlock. The locks and installation are (SHS5230 @ $830) $1550. I thought I just share a little bit on getting the locks. My wife and I wanted to have the convenience of having keyless access to our home but was hesitant to get it because of the big price tag. So we thought we could just do with one digital lock at the main door but when we think deeper, we would still need to have a traditional lock at the gate (not applicable if you don't think is necessary). So to my wife and I, its either we install both or don't install at all. In the end, we decided to go for the digital lock at the gate too. For the gate lock to work securely, they need to built a casement to prevent people from putting their hands behind the gate and open it manually. Putting a casement also means that its very troublesome if you need to open the gate from the inside. To overcome this, they added a radio wireless remote to open the gate from the inside. Therefore the price tag of $1550. The work involved is quite tedious (took them about 2.5 hours), especially for the one at the main door. Not really something we want to do it ourselves. The prices of this locks are very cheap at Gmarket etc but we really didn't want the hassle. Hope this helps. Bigbull

Thanks everybody, Ya, we are prepared for Christmas. I think we still have a good few weeks to tidy up the house. Juxstapose, indeed they are!

Hi Momiji, The shower glass doors are 185cm tall. Bigbull