Jump to content
Find Professionals    Deals    Get Quotations   Portfolios

elastic25

Members
  • Content Count

    4
  • Joined

  • Last visited

Community Reputation

0 Neutral

About elastic25

  • Rank
    Newbie

Previous Fields

  • Gender
    Male

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Cement added with K 21 : SBR LATEX will have: Strengthens cement Improved bonding strength by 2 to 3 times to 30.57 kg/cm2 Especially good for bonding homogeneous tiles, granites and marble tiles, and to prevent staining Increased flexural and compressive strength by 40% to 100% Compressive strength to 570.00 Kg/cm2 Flexural strength to 127.41 kg/cm2 (ASTM C 39) Quicken cement setting time Reduced surface cracking and dusting, forming a very tight seal Good for wall plaster, wet area and swimming pool waterproofing 10 to 20 times more resistant to oil, salt water, chloride, acid and vapour penetration. A feature particularly important in steel reinforced concrete structure. Improved plasticity and flow (ASTM C 124-71), easier to work with, reduces porosity
  2. DESCRIPTION : ELASTO Bath seal is a water based aqueous silicone ester emulsion. It is designed to be used for reducing water absorption capacity of building materials. Elasto Bath seal can be used for the waterproofing of external brick walls and exteriors without leaving any patch. When Elasto Bath seal is incorporated into low slump cementitious products such as imitation stone blocks and pavers, the permeability to water and the occurrence of unsightly efflorescence is dramatically reduced. It is an ideal solution to leaking Bathrooms and Toilets. Simply brush or pond on tiles and grouts. It penetrates & forms micro crystals when reacts with water present in concrete. PRIMARY USES : 1) Excellent products for exteriors or expensive tiles/stones/marbles etc. 2) Elasto Bathseal reduces water absorption by about 95%. 3) Elasto Bathseal is permanently bonded to substrate and cannot be washed out. 4) Does not leave any oily residue on the surface 5) Easy to Use. 6) No hazardous solvents emitted during use. 7) Non – flammable and non – corrosive. 8) Can be applied directly on to ceramic tiles, stones without removing them, incase of leaking toilets. TECHNICAL DATA ;  Appearance : Liquid with slight alcoholic odour  Specific Gravity : 0.95  PH value : 6.5 - 7  Solubility in water : Miscible  Flash Point : > 100°C DIRECTIONS FOR USE: Preparation of Surfaces to be treated is of utmost importance. The surface should be clean free from any bitumen, oil, grease and loose particles. All laitance and loose particles should be removed by wire brushing prior to the application of Elasto Bathseal .All undulation and cracks should be filled with made good using Elasto build Repair systems after application. Can be applied by low – pressure spray pump or brush / Roller .Two application wet to wet should be made. Ponding should be minimum 2 hours. Coverage : 45 -50 Sqft per litre depending on the porosity of the substrate. STORAGE: To be stored in closed container in a cool place and prevent from extremes of heat. PACKING : Elasto Bathseal is available in 5 Litre, 20 Litre & 30 Lts packing containers. HEALTH & SAFETY : Non – hazardous, Non Toxic, Non -Flammable
  3. Features: Cement added with K 21 : SBR LATEX will have: Strengthens cement Improved bonding strength by 2 to 3 times to 30.57 kg/cm2 Especially good for bonding homogeneous tiles, granites and marble tiles, and to prevent staining Increased flexural and compressive strength by 40% to 100% Compressive strength to 570.00 Kg/cm2 Flexural strength to 127.41 kg/cm2 (ASTM C 39) Quicken cement setting time Reduced surface cracking and dusting, forming a very tight seal Good for wall plaster, wet area and swimming pool waterproofing 10 to 20 times more resistant to oil, salt water, chloride, acid and vapour penetration. A feature particularly important in steel reinforced concrete structure. Improved plasticity and flow (ASTM C 124-71), easier to work with, reduces porosity Packing : 4 kg
  4. Product Description :K25 After mixing with Portland grey Cement . Bonding – excellent bonding property, will bond onto cement, sand, polyurethane, and bitumen surfaces. Therefore it can be coated over existing waterproofing membrane layer. Flexibility – Cured coating is elastic, flexible, and very stretchable with excellent contour conforming ability. Weathering – It is a chemically stable product, resists UV ageing, temperature changes, and remains impermeable to water. Withstands wide temperature changes – does not blister or soften at higher temperature; remains supple and flexible at lower temperature. Chemical resistance – resistance to mild acid and alkaline solution. Tough and resilient – suitable for various type of waterproofing needs. Environmentally friendly – It does not contain organic solvent, does not pollute, flame resistance,safe to use. Packing : 4 kg
×