Changbp
-
Content Count
455 -
Joined
-
Last visited
-
Days Won
3
Posts posted by Changbp
-
-
Please PM cost to
1. Tile backsplash between top and bottom kitchen cabinet. Length is under 1700mm.
2. Tile a small area to raise it like a kerb (between front door and front gate). Current HDB built is sloped. If jet wash of corridor by town council the water may come in.
3. Tile 1 side of the service yard wall (the half height one)
-
Do you have a close up of the handle? and Does the sprayed handle look glossy? Just went ikea earlier i noticed yours similar to one of those that i saw there.
Was toying with a idea of buying from Ikea at couple a bucks for 2 pieces and electroplate it gold colour from a metal treatment house. However just found out that plating cost for each is like 20nucks so gave up that idea. I like a polished and gloss handle look but not confident of Diying spray to that effect.
-
Hi all renotalk members, we are running a special air-con promotion for MITSUBISHI STARMEX:- (Please email aron at aronputt@gmail.com for this promotion)
A) Special Renotalk Price: $3850 nett for Mitsubishi Inverter system 4 (current model, 18kbtu + 9kbtu X 3)
B) Special Renotalk Price: $2999 nett for Mitsubishi Inverter system 3 (current model, 9kbtu X 3)
B) Special Renotalk Price: $2899 nett for Panasonic Inverter system 3 (new model, 9kbtu X 3)
C) Special Renotalk Price for brands like daikin, toshiba, LG etc. Single Split, System 2/3/4 available for both inverter and non-inverter.
* Free & no obligation Site Survey
* Free 2 trips installation (1st trip to run piping, 2nd trip to put up air-cons [if needed])
* Free dismantle and disposal of old air-con
* Free upgrade to Armaflex class “O” 1/2 inch thick insulation,G22 copper pipe,keystone cable (made in singapore),16mm drainage pipe
* Special coordinating work between us and customer’s contractor
* Special appointed installation team
* Special supervising work by head of installer
Terms & Conditions
*All promotion items while stock last
*All prices include HDB standard installation
We have set up a facebook page (link below) specially for you and all Star Cool customer who will like to seek for after sales service, air-con advise and quotation. Please kindly dropby and give us a like if you are satisfy with our services.This facebook page will also serve as a channel for you to contact us if you have any enquiry in regards to your aircon.Thank you,
Aron
(aronputt@gmail.com)
Hi please Pm me the quote for Daikin system 3. 18k x1 + 9k x2. How many ticks?
And how is the the payment schedule and warranty details like?
-
Haha, totally understand you.
I already go down less often... My contractor handle a lot for me so I'm okay. Haha.
Yours will be good la
Hopefully I come to my senses re my rainshower and shower sets. Also so tempted by Toto and Grohe sinks LOL.
Just sold a bunch of stuff on Carousell and packed my first box of stuff for moving! Hahaha!
I was about to buy the rain shower set and gold tap from the TB link u sent. Are they no good that you are going to change them?
-
Please pm me price for haiku 52 bamboo sense and vento wall fan with wood blades that Rebecca posted a couple of threads earlier
-
Thanks.
My service yard only has space for vertical mount due to the clothes hanger. For the panel ideally to be mounted-outside the bathroom instead of in the service yard but my switches are all already concealed so I will give it a miss as protruding will look ugly.
Can pm me the cost for the 25l square digital one?
-
Hi,
can your water heater be mounted vertically in the service yard?
Assuming a family size of 3 what size storage would you recommend?
Digital panel mounting is concealed type? How is the wires run if I'm not making false wall?
-
Who's your ID?
-
I would recommend that you dark out the bubbles portion in the picture of the key.
-
Btw, your rainshower and taps from Tb is the fitting size correct? Read somewhere that China sanitary fittings are different size from ours
-
Does anyone know if a granite kitchen top can be cut on site?
Question is related to future proofing my kitchen top as I'm going with small width hob like 30cm now but in future if I want to upgrade to say 70 -90cm hobs it's still doable on site.
-
I saw gold colored handles today at plaza sing, brand is Baldwin. Knobs about 18-20 a piece. Handles slightly more.
Even Abloy, the lock brand also has them.
Wonder where can get cheaper?
-
Please pm me where u get the washer dryer, model and price thanks.
-
Btw, where sells teka kitchen stuff?
-
I brought my lg art cool for 3.1k system 3, with a bigger btu fc 18000 for living room.
Where did u get it from?
-
The hood is just motor pulling air from outside inwards and venting it out again. Similar analogy but reversed direction, Just imagine a stand fan, use a cloth cover the rear of the fan you can see the output is greatly reduced.
If you dont mind it venting into your cabinet (with smells and greasy air) The mesh + carbon filter will not 100% remove all. Especially less if it is very used and not periodically changed.
-
Think 15A only maximum 2 from the mains of my hdb. Want to pull more also dont have.
By the way would the paint last with constant handling? Since u will be using it for knobs and handles there is frequent "rubbing".
-
Are you using gas heater or storage tank?
I need the 15A lines for air con and induction cooker so Have to go gas... But kind of worried that the water pressure will be too low for rain shower with gas heaters. Does anyone have experience in this?
-
Does the rainshower look and feel like the real thing?
I dont mind authencity if its classy and good. Can post the tb link? Thanks.
-
Can post tb links for the gold tap and bidet spray? Hansgrohe taps too? Are Those genuine?
-
May i know how much does your carpentry for the kitchen and bedroom cabinets cost?
By psf right? Please pm me. Thanks
-
Custom carpentry can do... if you like the ikea bobbyn door front kind of look then they can nail mdf cut on the flat panels and then spray painted instead of flat laminate. Though I think it's difficult to achieve that kind of quality. IKEA ones are very well painted probably through an automated process.I have no pipes at all on my back wall, but as to how flat they are, I have no idea. The cabinets are actually fixed to the wall and then have front metal legs that are covered with plinth.
The finish is different for IKEA imo, which is why I am still so attached to the idea. I have visited more neighbors' homes with laminate custom carpentry and I still cannot fall in love with the look. Gonna wait for what IKEA Alexandra's kitchen team proposes to accommodate all the gas and water pipes.
Will update on how it turns out...
Btw, can you post the taobao links for the towel rack and rain shower? Have you received it and How were they?
-
I follow about half of what you're saying...
So does that mean the back of my IKEA cabinets will have a gap, or that my IKEA cabinets will be slightly slanted (meaning worktop is not 90 degree from the floor)?
I am not doing plinths if I go with IKEA, but asking my contractor to build a 6-8" cabinet base... Does that help?
Thanks for the input btw!
I'm having similar design as you and have similar dilemma on ikea cabinets. I downloaded their install guide and What I found out was that The cabinets are actually suspended. You mount rails on the walls and then hang the cabinets on them. This means the back wall needs to be very flat and cannot have pipes. Which was why I forsake the idea of ikea cabinets as the back portion cannot be cut to allow access for pipes, though they were probably the cheapest way to obtain the classic look.
Ryvian Renovation Journey
in Reno t-Blog Chat
Posted
I have a similar placement as you did for the master bed room. Where was your aircon placed and how were the pipes routed?