twinpisces 0 Report post Posted January 12, 2011 (edited) Not sure how to start this. Have benefited much from this forum and thus decided to share my experience gain from this whole reno project. My wife, little princess and myself have been living at this place for the past 8 years. We were not so well of when we married. Therefore, could not afford any reno to our new flat we got from HDB. I remebered queuing for 3 days for this flat. Great that HDB has drop this method of first come first select. Now that I recalled, I was kinda agressive and did not think too much of potential risks and consequences. I was jobless and still decide to marry my wife and get myself a executive flat. I don't think few woman would do that these days. Thank you wifey for buying my "selling tactics"! Our humble home is a 1400 sqf executive flat at Punggol. It is a design and build flat. Floor tiles, toilet done up, kitchen wall tiles, etc are already included when we moved in. We just buy simple furniture just to stay in there. We spent about $5000 to do up the kitchen cabinet. That is the biggest sum we paid when we moved in. This is our proposed layout. We have visited many IDs over a period of 3 months. During this period, we are also material research (for instance, tiles, blum, lightings, etc). Edited January 12, 2011 by twinpisces Share this post Link to post Share on other sites
twinpisces 0 Report post Posted January 12, 2011 (edited) I shall not speak about some of the bad experience I had with the IDs. Some of them are those that are advertised on radio, TV, etc. This industry is still not so regulated and therefore, you have professional and some not so proefessional. Some black sheep is not doing much positive image for this industry. We had plenty of experience; some cannot remember we have a appointment and did not provide any quote. We had one who we were about to sign on the dotted line. But he did not turn up for the site measurement. Finally, we landed on Distinct Identify through recommendation from a friend who have completed project with them. I personally think good recommendation still is the best way to select your ID. You still need to speak with the recommended ID but at least it would save a lot of unnecessary encounters comparing to those experience that are walk in. IDs from the same company may not even have the same quality. I will provide the rating of my engaged ID based on these few categories. Capentry Workmanship Tiling Workmanship Electrical Workmanship Plumbing Workmanship Responsiveness Friendliness 3D imaging and elevation drawings Quality Control Edited January 12, 2011 by twinpisces Share this post Link to post Share on other sites
twinpisces 0 Report post Posted January 13, 2011 (edited) After few weeks of drilling the details, we finally have our 3D perspective of what we will be getting. Master bedroom toilet Common toilet Edited January 13, 2011 by twinpisces Share this post Link to post Share on other sites
twinpisces 0 Report post Posted January 13, 2011 (edited) Kitchen Kitchen Island This kitchen is designed according to the requirement of my wifey as this is her territory. Even for the old kitchen she also does not like me to dirty it. For this kitchen, she "die die" also must have a "ang mo" style of island type of kitchen. So the designer try every possibilty to come up with one for her. She likes to bake and I like to eat, so I didn't object much to having this island which likely will reduce the walking space around the kitchen. Edited January 13, 2011 by twinpisces Share this post Link to post Share on other sites
twinpisces 0 Report post Posted January 13, 2011 Living room Living room (another angle) Share this post Link to post Share on other sites
twinpisces 0 Report post Posted January 13, 2011 Master bedroom Share this post Link to post Share on other sites
twinpisces 0 Report post Posted January 13, 2011 (edited) In terms of producing the 3d perspective and elevation, I would rate this ID a score of 8.5 out of 10. As far as I am concern, they are not too "stingy" in giving you the 3d perspective. I personally think the autocad drawing help the home owner like us a better understanding of what we will be getting. What I have shown you is just a screen shot of the drawings. Didnt show the pdf bec it contains information I do not wish to show. The file is a dwg format. This format can be converted to pdf, which I do for my wife to view on her laptop. Therefore, you need the correct reader to view it. I like this format as it does show the professionalism of the designer. Edited January 13, 2011 by twinpisces Share this post Link to post Share on other sites
twinpisces 0 Report post Posted January 13, 2011 Stay tuned to my blog. I will try to post some pictures of our old home. So can give a before and after look. Share this post Link to post Share on other sites
berry_surprise 0 Report post Posted January 13, 2011 nice 3D pictures, u make me feel like having a new home again! looking forward to your transformation! Share this post Link to post Share on other sites
Chanel26 1 Report post Posted January 13, 2011 Kitchen Kitchen Island This kitchen is designed according to the requirement of my wifey as this is her territory. Even for the old kitchen she also does not like me to dirty it. For this kitchen, she "die die" also must have a "ang mo" style of island type of kitchen. So the designer try every possibilty to come up with one for her. She likes to bake and I like to eat, so I didn't object much to having this island which likely will reduce the walking space around the kitchen. I am really impressed and inspired by these images. It looks really nice! Share this post Link to post Share on other sites
Farizar 0 Report post Posted January 13, 2011 Master bedroom Hi twinpisces, a gorgeous home u have der.. I love ur WIW design, we wud prob need to do something similar to urs.. Mind sharing ur quote n cost for Reno? Can pm me if it's inconvenient to post here.. Thanks! Share this post Link to post Share on other sites
ice803 0 Report post Posted January 13, 2011 Hi, can you pm me your ID contacts? mind sharing your quotes and cost too? Share this post Link to post Share on other sites
twinpisces 0 Report post Posted January 18, 2011 (edited) nice 3D pictures, u make me feel like having a new home again! looking forward to your transformation! As we need to move out of the house for about 2 months, my wifey is staying with her parents with my princess while I go back to my parent place. As my room has been occupied by my sister, I have to sleep in the living room Seems like a stranger when I moved back to my parents' place, even though I have lived there for the past 20+ years. nice 3D pictures, u make me feel like having a new home again! looking forward to your transformation! Yeah, will post my current look yes very nice 3D photos! i like the design scheme...very classy. Thank you! My wifey makes most of the colour scheme decision together with the recommendation from our ID. I am engineer, thus I have to admit I am not very good with choosing the right colour scheme. I am really impressed and inspired by these images. It looks really nice! I can only hope it turn out 95% the same as these 3d diagrams. Edited January 18, 2011 by twinpisces Share this post Link to post Share on other sites
twinpisces 0 Report post Posted January 18, 2011 Hi, can you pm me your ID contacts? mind sharing your quotes and cost too? This revamp project cost us about S$53k. Excluding air-con systems, electrical works, light fittings, toilet accessories/fittings and blum fittings. Share this post Link to post Share on other sites
twinpisces 0 Report post Posted January 18, 2011 (edited) We noticed our friends and relatives kitchen's solid top tends to discoloured and have fine line scratch after about 3-5 years usage. The deteriorating effect is more obvious for colour like while or black. Since my wifey wants a light tone kitchen (meaning white base), so our requirement for the solid top have to be durable and the colour should be lasting. We started looking at various options and happened to come across this material called quartz. Quartz clamied that they have benefits that include less chipping, cracking or discoloring and a less porous surface. In theory, you basically can do your cutting on it. However, if you have choosen this material, I would reckon you would buy a chopping board then take the risk There are about a handful of quartz manufacturer, I wouldn't rate which one is better. Maybe those who has used this material could share with us their rating. Here are some info about them which I have cut out from the websites. Silestone® (Made in Spain) Made in Spain by Cosentino, it claims that this it's technology is over 15 years old, making it the old player in the field of quartz stone surfaces. Silestone is scratch resistant, stain resistant, amd heat resistant. A unique feature is Silestone is the Microban technology that is intergraded on the product. Microban claims to continuously fights the growth of microbes that can cause stains and odors and Microban protection makes your Silestone countertops easier to clean and keeps them cleaner between cleanings. The promotion of Microban antimicrobial protection is that it is effective against most common bacteria, yeasts, molds and fungi that cause stains and odors. Microban technology is not designed to protect users from disease-causing microorganisms. Zodiaq® (Made in Canada) From the maker of Corian, comes Zodiaq®. DuPontTM Zodiaq® claims to have produced an advanced composite material made of 93% quartz with a DuPont proprietary binding polymer and pigments. If anyone has the money for R&D, DuPont does. Their stated goal was to create a new material with its own depth and character and a unique aesthetic, suggesting a sense of enlightened luxury and an attitude of bold sophistication. When you think of Zodiaq®, most people do not know that it is made by one of the largest and most sophisticated countertop maker in the world. Cambria® (Made in USA) Perhaps the smallest player in the market is Cambria quartz stone surfaces which is American owned and operated by the Davis Family. As with all the other brand names, Cambria quartz stone surfaces are also comprised of approximately 93% quartz and claim the same low maintenance advantages. CaesarStone® (Made in Israel) Quartz is one of the hardest minerals and is calculated at a hardness level of 7 on the Mohs Scale of Hardness. The company proclaims to be the originator of quartz kitchen and bath countertops, and claims to have advantages over other surfaces. Many installation professionals dispute Caesarstone's claims that it does not allow bacteria growth and cleans with just a moist cloth. It is promoted to resist damage from heat and acids such as caustic wine spills and knife scratches. These claims are also questionable. We have choosen CaesarStone (http://www.caesarstone.com/). There are too many claims by these manufacturers. To us, the properties for quartz is about the same. Our requirement is a hard surface that is non-porous. We have also choosen the colour code 2141 (snow) that will finished with square edge and come with a backsplash. The sink will be under-mount as well. Here are some pictures how the quartz surface will look like for 2141 (snow). Edited January 18, 2011 by twinpisces Share this post Link to post Share on other sites
