andy_sg_123

Hi Haze02, Yoongf is correct, never use the white wire, if your contractor use it, ask them to replace it. You also need to ensure that the wire connect to the TV is not in white colour type. Worst come to worst, I think you should feedback the problem to your ID since they are the one who provide the rewiring service. Let them reslove your problem before clearing all the outstandings with them. Hope your problem will be reslove soon......

Hi, How many TV points do u have? For some cases, if there are too many TV points, this will affect the quality of the TV signal. Reason is that there maybe only 1 main SCV point that were spilted into many different points. One soultion is to buy a booster from SCV. Another possible reason is that the wire is not properly lay. Ask ur contactor to use another wire & test with ur TV. See whether silimar problem occur. If so, this proven that there is no problem with the wire. For my case, I need to buy the booster which cost abt $150 to reslove this problem. Hope this may help u.

Thanks for your advice. Please give me the number? Do you mean I must have 5 booster? Where will it be installed?

hi, How does the booster works? This is because I have just renovated my resale flat. As this is a old flat, its only have 1 original SCV point outside my flat. I request a 5 SCV in my house. The electrician did not install a booster but spilt it into 5 individual point, as a result, the signal is very weak. Although I have a full HD TV, the image is not sharp on certain channels (eg, channel U, CNA etc). Anyone knows how to resolve this issue?

Anyone provide wallpaper svc? I have a roll of wallpaper from goodrich & would like to enage someone for gluing svc on a small portion of MBR's wall. Please email to andy_sg_123@yahoo.com.sg & quote your charges. Thks!

Hi, Thank for your reply. My wallpaper is from goodrich. I don't think is made of paper. I only need do it only part of my bedroom's wall. Therefore, I dont think I need to use too many glue. What is the brand of your glue are you referring? Any recommended website for the Germany wall decals that you are referring? Is it cheaper than Singapore?

Hi rustgal, Can you guide me how to DIY wallpaper? This is because I have some leftover of wallpaper which I intend to do it myself. What type of equipment & glue should I use? Where to buy those glue? In addition, I intend to have some decals on the glass wall, do you know where to buy those stickers & cut it myself?

Anyone has any ideas on the colour of the wooden doors for all the bedrooms? What is the trend now?

Do u know the shop name? Full address, please.

I am intending to change my front gate lock for my resale flat as it is a bit rusty. When to Homefix, but they are not selling. Anyone know where to buy the lock?

Dear all, Yesterday, the technician from Gain City came to install my air con. To my horror, the truncking is partial chip off at my back of the MBR's door. I quickly called the techincian & he mentioned that this is the best way they can do because the house wiring has blocked the truncking casing. I feedback to him that this is unacceptable & has arranged him to rectify asap. Will try to call GC again today.

Anyone know how to change the rooms & letterbox locks???

I believe the topping up of R22 gases will last at least another 4-5 years. By the time, I think it is better to replace a new air con as my current set will be more than 10 years old.....hahahaaa....

Hi, I dun think it will not be avaliable for r22 to top up the gas. I have aldy checked with my sale person. Just imagine, currently there are more than 70% of sporean using r22 gas. If the topping up of gas is unavaliable, what will happen to all the households using r22 gases? What I heard from the sale person is that there is no different between r22 & r410 except the r410 is environmental friendly. According to him, the production of r22 air con system will be ceased by 2015. However, topping up of gas for r22 is still avaliable.

The price quoted by Hong Tar is including r410 gas? I have checked my invoice, the quotation is meant for r22 gas. u mean r22 will be phasing out in 8 yrs time? wat happen if we are currently using r22 gas? pls enlighten me. thks!

I never ask abt the gas leh...which is better? I think Hong Har is more expensive compared to GC. Dun forget, my price include the bracklet which u do not need.

Hi, I got my Mti system 3 (non-inverter) @ $2108 (incl GST). Copper 22, 1/2 inch insulation & bracklet. I got it fm Gain City@IMM. u?

Hi, You mean Chelsea Lightning? They sell Wall Fan meh...I check the price, the price range is like that. Maybe few $$ different only.

Anyone know which brand of Wall fan is good. I prefer the one with remote control.

Hi Lilian, I agreed with u that Mit is over-priced. I have used Mit (Mr Slim) before & I find that the aircon is very quiet compared to other brand like LG & Fujitsu. Furthermore, I do not have any maintenance issue on Mit. However, it is ex compared to others. Maybe because of the Jack's Neo advertisement & the newsapaper advertisements which they published frequently in Today newspapers. This may called the premium ba...No choice leh....I rather pay more for a better quality products. Aircon is not like a sofa, table & chairs, where we can just throw & replace a new one easliy.

Hi Starscream, How come some ex? I thought the quotation is $2,850 + $120 (bracket) from Hong Tar? I finally decided to buy my Mit aircon (non invertor) from Gain City @ IMM for $2,108. 1/2 inch insulation, Grade 22 copper + installation & bracket. I choose GC becos I find the price is reasonable & they accept Credit Cards , can earn points mah.....

Hi henrywoo1978, I called Gain City @ IMM to ask abt the quotation. The saleman say that Fujitsu is currently having promotion & is selling at $2.3K. Don't know is true or not. Anyway, I have checked with Hong Tar & compare the price : Hong Tar : (Fuji)- ard $2.5K + 120 (bracket), (Mit)- ard $2.8K + 120 (bracket) GC : (Fuji)- ard $2.3K + 150 (bracket), (Mit)-ard $2.8K + 150 (bracket) Don't know the quality of the wiring is same or not. Have not gone down to ask GC. How long have u bought the aircon? How much u bought it then? Where u got it? I believe is the latest model with the invertor type.

Anyone has already installed the new Fujitsu inverter aircon? Please feeback. This is because I am considering a Mitsubishi or Fujitsu. Mit is ard 2.9K but Fuji is only cost 2.3K for system 3.

Anyone know where to buy cheap & good quality toilet accessories, basins & taps?