Skip to content
View in the app

A better way to browse. Learn more.

RenoTalk.com ™

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Problem With Drilling On Tiles

Featured Replies

Hi,

How do you drill through ceramic tiles without the drill bit sliding off the tiles?

I saw some website articles where they said to paste masking tape on the area of the tile where you want to drill, so as to prevent the drill from sliding.

I tried that but it's useless. Immediately after my drill bit has pierce through the masking tape layer, the drill bit starts sliding all over the tile. I've also tried pasting multiple layers of masking tape, but well.... :rolleyes:

I'm using the carbide-tip drill for tiles, which is the correct type of drill bit.

Any ideas? Btw, if anyone here provides services like what I require, pls PM me or e-mail me at xeon@outgun.com, or reply to this thread.

Thanks! :D

Stick masking tape.

Use pencil to mark out location, and draw some extra extension lines like a target. When u start drilling, the location mark will be gone, so these extension line will be useful.

Use a hammer and the drill bit, to lightly chip away a dent, to create a depression so that the drill bit will sit at the exact location.

Once u get a rough depression, then can start drilling. Can do the same for homo tiles.

  • Author
Stick masking tape.

Use pencil to mark out location, and draw some extra extension lines like a target. When u start drilling, the location mark will be gone, so these extension line will be useful.

Yeah, that's exactly what I did, but after the drill bit has drilled through the masking tape, it starts sliding all over the place.

Use a hammer and the drill bit, to lightly chip away a dent, to create a depression so that the drill bit will sit at the exact location. Once u get a rough depression, then can start drilling. Can do the same for homo tiles.

Lol, I don't dare to use hammer to chip a dent cos' the ceramic tile is just the tile by itself (not pasted on those walls that kind). The thickness is only like 0.5 cm so I think if I exert a bit too much force, the whole tile will crack.

Btw, are there anywhere in Singapore that provides drilling on ceramic tiles?

I've like 30+ tiles to drill through.

  • 3 years later...

hello everyone! check with u all... does drilling on the toilet wall tiles chip off surface of the tiles? is this normal?

What do you mean chip off surface of tile? would you like to post a picture?



hello everyone! check with u all... does drilling on the toilet wall tiles chip off surface of the tiles? is this normal?

The correct way of drilling tile is to make use of tile drill bit. Any DIY shop will sell this

Use this drill bit, disable the hammer function and drill through the tile. Once u have created a hole on the tile, change to a normal masonry drill bit and continue to drill through the wall

Edited by hawthorne

Create an account or sign in to comment

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.