Stainless Steel Border Between Wall Tiles

[HandyManny 0]

Hi, I am looking for stainless steel border between wall tiles for my bathroom. They should be about 0.5 inch thick. I have seen some at SBH. But the stainless steel border that I am looking for is they "shining" type. The onces at SBH are mat stainless steel.

Please let me know if you know where I can find these "shining" stainless steel border between wall tiles.

Thanks in advance.

[gladyslim 0]

U can get stainless steel insert from hardware supplier.

Grade: 304L / 316

finishing: 2B / 4B / Hairline

Size: 3x6, 3x12, 3x15, 3x20 etc x L4000mm

*Note: There's 2 types of finishing for the edges: 1) 4 edges is 90 degree

2) 4 edges dented (curve)

What u are looking for the shining type is BA finishing, this require polishing.

There is a factory at Yishun providing this type of insert mainly to Interior Design co.

U can get thinner material: 1mm x 10mm x L2400mm which is normally use in decorating of wooden door from them.

[HandyManny 0]

Thanks for the useful information. I will start making some calls to stainless steel manufacturer to see who provide those inserts.

[gladyslim 0]

Thanks for the useful information. I will start making some calls to stainless steel manufacturer to see who provide those inserts.

U can order the shinning finishing type- BA at Blk 1 Yishun #06-36.

Cut to size in polished finishing but no installation.

If u DIY, u can get the 4B finishing at any hardware shop.

Google at www.greenbook; hardware; stainless steel for more supplier like Hong Hock, Lian Soon, Sin Yeh etc