Hello,

Can you quote me for 4 room BTO.

Looking for System 4 inverter for my 3 rooms and 1 living room,  please quote me Mitsubishi Electric Starmex (2 & 5 ticks), living room may consider 12K and 18k  BTU.

Kindly include GST,

 -installation (2 times installation)

 -1/2" Armaflex class "0" insulation

 - G22 copper pipe

 -16mm drainage

 -additional cost for any length of pipe used for installation?

 -warranty (parts and installation)

Breakdown the cost if possible for comparison. Thanks you!

22 hours ago, huggermonster said:

Hi Eva,

I am not sure which system configuration to get. Will need recommendation. Will like to install aircon for my 3 bedroom and one living room. Living room abt 35sqm(so is 18kBTU enough?) For bedrooms looking at  2X 9k BTU and 1X 12K BTU. Please give me a quote based on various brands/models and the type of piping etc. Thanx.

Hi huggermonster,

Thanks for your enquiry.

I've just PM-ed you the quotation. 

Please do not hesitate to contact me if you have further clarifications. 

Have a nice day! 

 

Eva 

67558255 / 96758255

2 hours ago, Alvincheng said:

Hello,

Can you quote me for 4 room BTO.

Looking for System 4 inverter for my 3 rooms and 1 living room,  please quote me Mitsubishi Electric Starmex (2 & 5 ticks), living room may consider 12K and 18k  BTU.

Kindly include GST,

 -installation (2 times installation)

 -1/2" Armaflex class "0" insulation

 - G22 copper pipe

 -16mm drainage

 -additional cost for any length of pipe used for installation?

 -warranty (parts and installation)

Breakdown the cost if possible for comparison. Thanks you!

Hi Alvincheng,

Thanks for your enquiry.

I've just PM-ed you the quotation. 

Please do not hesitate to contact me if you have further clarifications. 

Have a nice day! 

 

Eva 

67558255 / 96758255

Hi, can you please quote me for the following?

Mitsubishi Starmex Model: MXY-4A28VA / MSY-GE10VA X3 + MSY-GE24VA (2 ticks model)

Requirements:

- materials: G22 copper coil, 1/2" Armaflex class "O" insulation, 16mm PVC drain pipe with armaflex insulation, 3 core 40/70 Keystone control wire

- others: 2 trips installation, dismantling & disposing of existing system 3 air-cons

- work with my ID on the required works

Thanks.

11 hours ago, bunnybluey said:

Hi, can you please quote me for the following?

Mitsubishi Starmex Model: MXY-4A28VA / MSY-GE10VA X3 + MSY-GE24VA (2 ticks model)

Requirements:

- materials: G22 copper coil, 1/2" Armaflex class "O" insulation, 16mm PVC drain pipe with armaflex insulation, 3 core 40/70 Keystone control wire

- others: 2 trips installation, dismantling & disposing of existing system 3 air-cons

- work with my ID on the required works

Thanks.

Hi Bunnybluey,

Thanks for your enquiry.

I've just PM-ed you the quotation. 

Please do not hesitate to contact me if you have further clarifications. 

Have a nice day! 

 

Eva 

67558255 / 96758255

Need 2 quotations - TYPE HDB and BTO

Looking for System 4 inverter  for my 3 rooms and 1 living room,  please quote me Mitsubishi Electric Starmex (2 & 5 ticks), living may consider 12K and 18k  BTU.

Kindly include GST,
-additional cost for any length of pipe used for installation?
-warranty (parts and installation), etc....

Breakdown the cost if possible for comparison. Thank you.

Jason

Hi Jacob,

Thanks for your enquiry.

I've just PM-ed you the quotation. 

Please do not hesitate to contact me if you have further clarifications. 

Have a nice day! 

 

Eva 

67558255 / 96758255

Hi Eva,

Please quote for System 4 Mitsubishi Electric Starmex (2 and 5 ticks). 5 room BTO, Bedrooms 9k BTU, Living 18k BTU.

Kindly include GST,
 -installation (2 times installation)
 -1/2" Armaflex class "0" insulation
 - G22 copper pipe
 -16mm drainage
 -additional cost for any length of pipe used for installation?
 -warranty (parts and installation)

Thanks

Desmond

59 minutes ago, desmtooh said:

Hi Eva,

Please quote for System 4 Mitsubishi Electric Starmex (2 and 5 ticks). 5 room BTO, Bedrooms 9k BTU, Living 18k BTU.

Kindly include GST,
 -installation (2 times installation)
 -1/2" Armaflex class "0" insulation
 - G22 copper pipe
 -16mm drainage
 -additional cost for any length of pipe used for installation?
 -warranty (parts and installation)

Thanks

Desmond

Hi Desmond,

Thanks for your enquiry.

I've just PM-ed you the quotation. 

Please do not hesitate to contact me if you have further clarifications. 

Have a nice day! 

 

Eva 

67558255 / 96758255

Can you PM the cost for the following?

Toshiba System 3

Toshiba System 4

Daikin System 3

Daikin System 4

Roy

Hello,

Can you quote me for 5 room BTO.

Looking for System 3 inverter for my 3 rooms,  please quote me Mitsubishi Electric Starmex (2 & 5 ticks).

Kindly include GST,

 -installation (1 time)

 -1/2" Armaflex class "0" insulation

 - G22 copper pipe

 -16mm drainage

 -additional cost for any length of pipe used for installation?

 -warranty (parts and installation)

Breakdown the cost if possible for comparison. Thank you!

   0

11 hours ago, slickkon said:

Hello,

Can you quote me for 5 room BTO.

Looking for System 3 inverter for my 3 rooms,  please quote me Mitsubishi Electric Starmex (2 & 5 ticks).

Kindly include GST,

 -installation (1 time)

 -1/2" Armaflex class "0" insulation

 - G22 copper pipe

 -16mm drainage

 -additional cost for any length of pipe used for installation?

 -warranty (parts and installation)

Breakdown the cost if possible for comparison. Thank you!

   0

Hi slickkon,

Thanks for your enquiry.

I've just PM-ed you the quotation. 

Please do not hesitate to contact me if you have further clarifications. 

Have a nice day! 

 

Regards,

Eva 

67558255 / 96758255

Can quote me for 2 rooms - Daikin or Mitsubishi - single split system

include breakdown of cost (inclusive of GST)

Hi ,

Please quote the following for 5 rm BTO which I like to air con 3 bed rooms, 1 study room, 1 living room.

MITSUBISHI SYS 3 - INVERTER (2 ticks)
MXY3A28VA
MSYGE10VA x 02
MSYGE24VA  x 01

MITSUBISHI SYS 2 - INVERTER (2 ticks)

MXY2E20VA
MSYGE10VA x 02

- installation 
- 1/2" Armaflex class "0" insulation
- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation
- Cables – 4C40,4C70 with PSB Tested
- PVC Trunking – minimum 2mm thick
- additional cost for length of pipe used ?
- warranty (parts and installation)

Thanks

Hi there,

I will like to get quotation for myself and my friend's house below:

Quote 1 - Landed Property 
Panasonic single split - CU-XS9RKZ (new model, 9000 BTU)
- 1/2" Armaflex class "0" insulation
- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation
- Cables – 4C40,4C70 with PSB Tested
- PVC Trunking – minimum 2mm thick

Quote 2 - HDB
Panasonic system 2 - CU-2XS18RKZ (new model, 2 x 9000 BTU)
- 1/2" Armaflex class "0" insulation
- G22 copper pipe with PSB Tested
- 16mm diameter with ¼’ thinness insulation
- Cables – 4C40,4C70 with PSB Tested
- PVC Trunking – minimum 2mm thick

Questions
For survey, is it available on weekend or after 6PM?
Is installation available on Saturday?