benetay

Possible and you will need to cover the hole the. Probably do cabinet or something over it.

Did some minor changes and included the backsplash which was previously excluded: vs

For those with Stainless steel sink and in the middle of renovation, sometimes the contractor uses the tap and the water came in contact with cement, tiles, clay, etc creating hard water and eventually leave with water marks and stain that is difficult to remove. I have scrubbed using towel but the stain still remain when the sink is dry. Here is how i eventually got it removed. Things used: Oxo Squeegee Heinz diluted white vinegarBicabornate of sodadry towel3M sponge Time required: 10 minutes it is actually quite easy to remove, all we need is some diluted white vinegar and bi-carbonate of soda. I tried the 'artificial' vinegar and it isn't as good as the Heinz one. Really powerful. I'm using a 3M sponge (green side) and a towel. bi-carbonate and vinegar to create a paste and use the 3M green side to scrub. Please do not scrub too hard, it will scratch your SS sink. Just lightly rub the stain off. Then use a dry towel to wipe off excess paste and see if the stain has been removed All done!

I'm getting a Hansgrohe shower head, and if it makes any difference i will let you know. There are some suggestions online that it is due to water saving feature.

Initially thought we will only do one toilet which is the MBR toilet, now we think we should also do the common toilet and it is no going back. We import another Kraus bathroom sink combo... http://www.amazon.com/Kraus-C-GV-395-19mm-10SN-Vessel-Waterfall-Faucet/dp/B00HI0DQ3S/ref=sr_1_1?ie=UTF8&qid=1432819129&sr=8-1&keywords=gv+395 Will arrive in 4 days, free shipping as usual. This one is slightly more expensive than the kitchen and MBR Kraus sink. So now we have a total of 3 Kraus sink and tap. Quality is really top notch. Will take picture when it arrive. Hopefully before this Sunday. ETA Friday 29nd May.

Show us some pictures!!

All PMs and Email replies except for Home Sweet Home, can't send PM to him. Please PM me your email address i will only share via Email. Cheers!

First I would check outside the house if the main tap valve is opened fully. If it is, contact pub and share with them your issue ask them if it is possible to do a pressure test as it should read 2.5 bar of pressure. Then after that slowly track where the pressure loss happens, if it is the shower head, change it. There are water saving features in built into it and I do realise that the pressure is smaller compared to those I have used. New bto I realise the pressure is smaller esp on the top few floors. I'm at level 16, 2nd most top floor and the pressure isn't as strong as those on the 5th and 2nd which I have experience but others areas. it could also be the mixer where there could be a flow limiter. I may just ask my plumber to remove it to check if the limiter is the cause. Many reasons may lead to low pressure but I'm actually quite determine to make sure that I enjoy my shower. I'm guilty of turning up the water.

Philips house brand got 1 year warranty. Philips own brand 2 years warranty. Need to pluck the light down? I was told on site. Anyway, fuss free for me. Ya can try house of chandelier also. It's near me so that's why get from them. I bought all my light bulbs from overseas at 1/3 the price.

The bed is suppose to be place next to the wardrobe but since it is not finished yet, we leave a gap to check on other things. When we push the bed all the way, walking is fine. Space is fine as well. The "walkway" from the wardrobe is 75cm, once inside the walking space is 90cm. Next up, we will discuss with ID on our toilet design and we have another side project before finishing the renovation. Last night manage to get another kraus bathroom basin and faucet combo. Free shipping as well. Can't wait for it to arrive.

Pretty bright! We purchased 6 light sets from them and quality is really good. Of cause it comes with a hefty price tag if comparing these to taobao lights. No regrets.

Pd door is much cheaper. Still looks good though.

$680 for the door. Supposed to be one piece but due to tightness become double sliding.

Don't worry about the wooden shelves you can change to glass any time you feel like it. Get the basic ones first and change along the way. That's how I look at it. Currently I'm using the wooden shelves, any time in the next couple of years I want to change it? It's a call away. No hassle at all. If you want to use direct glass shelves it is ok as well. 5ft ain't big so no worries!!

Dean, forget about the Ikea racks... rust very easily. We had a few last time in old place, cheap but cannot last.

Dean, $380 pfr hmm. Glass shelves? or wooden shelves? adjustable? Mine is $300 pfr but is wooden shelves. Can upgrade to glass shelves but have to pay a lot more since more glass is involved.

MBR cabinet Door open to where our bed will be From the bed side perspective Still waiting for the headboard to be done.

Had a couple of free time on hand so went down to see what else need to be touched up. We are in the process of getting our toilet overlay with tiles but in the interim all work is more or less completed (90%). Clean all the windows with the Oxo squeegee, one of the best i have ever used! got from Amazon. All our plates and bowl are getting ready to be unpacked after the reno is done. Light cover up, cleaned the glass. toilet going to be overlay with different colour tiles to match the vessel sink

All emails and PMs sent.

All PM and emails replied. Thanks Kim76 on the kind words, i am inspired from your Hansgrohe wall bar slider and shower head, so put those in the cart in Amazon. Still waiting for tile selection on overlay half of the toilet. Forgot to take pictures when met with ID. Cheers!

All PM and email sent! Today wife went to collect lights from Tradehub 21, we purchased 4 lighting set to be place in MBR cabinet area, Toilet light x 2, Kitchen. Cheers!

That sound bad bro! What is your next step? Quite a handful of ID are just trying to close sales and then do it at their own pace. It is terrible. I'm the few lucky one.

Requires hdb approval. Requires water proofing. Maybe you can start with hdb and ask them regarding this and see if it is do-able or ask a contractor/ID to help you with the process.

For equipment and machinery if it is being service and re condition periodically it should extend the lifespan slightly. However, there is something call mean time before failure (mtbf). In other words, the product is being built with a time frame in mind for example 7 years. It does not mean it will break down at year 7 it also has a chance of breaking down since day 1. More and more products are getting shorter and shorter mtbf, and certainly even on a recent Japan trip, I was told that Japanese product are shortening their mtbf. However, there are still some very good made in Japan, Germany, U.S. Etc which are very reliable. A lot of these depends on the strategy of the manufacturing plant. Maybe you can share with us the brand.

Kimi, He is about 5 years into this industry and considered less experience from those with long history and big brand names. He is the boss of the company and engages his team to do the renovation. I would say so far forum members have seen his work and engages him. That would speak a lot because he uses only word of mouth through quality work. The glass door is very solid but you must also be aware that it will be heavier and expensive. A normal PD door is about 200 odds, this glass door is $680. It is 10mm tempered glass. Thanks for dropping by. You have PM.