Jump to content
Find Professionals    Deals    Get Quotations   Portfolios

Recommended Posts

Thank you @Changbp

@OceanEleven Erm, I don't think you want to see that, you'll have nightmares for the rest of your life. But I am thinking of doing a short video "tour" of my place once the reno is completed. I'll see if I have the skill to pull that off. 

 

Share this post


Link to post
Share on other sites
Looking for good contractors? Click here for your request
Guest brrrando

great looking pad! back your choice on the ebony dining table. may be darker but seems to have a lot more character to it. the more rings the older it is?

 

Share this post


Link to post
Share on other sites
On 4/22/2016 at 11:27 AM, JohnJohn said:

3D drawings

 

As you can see from the 3D drawings, I am not doing everything in my apt. I am most focused on my living room, bedroom and bathroom. Living room coz I am quite a couch potato. I like to watch movies a lot and spend a lot of my non-work hours in front of the TV. My bedroom is my sanctuary and therefore, I want it done up very well, coz if I am not in my living room, then I am in my bedroom. And finally, my bathroom, that is the third place I spend time in. I want it to feel nice and comfortable. I don’t cook, so the kitchen is not a big priority. But I needed to do it up as the old kitchen was very dated and did not fit into what I want.

 

http://FB_IMG_1459474513110_zpss7dahpq2.jpg

The wall will be much darker, almost black. And I will do away with the floor to ceiling cupbaords. Instead, I will do half height cupboards and create a storage platform in my living room.

 

Bro,

I like the design you have. Something which my wife n I is looking to do also. I like the colour but the wife just made me promise not to get these colours. I am a batman fan and if its up to me, would like to have dark cave like colours. Still negotiating for it to be in the MBR.

Anyway i saw you intend to do storage platform in the living room. Is your ID doing it for you or are you getting any other contractor/vendor to do? Possible to share with me the cost ? If the ID is good, let me know as well who he is please. We are not getting our BTO that soon(Q32016) but already started looking for IDs. Unfortunately I travel for my work so have limited time to meet up with many IDs. Will be following your progress. Hopefully all turns out fine for you. 

 

Share this post


Link to post
Share on other sites

Thanks for your kind words @huggermonster. Not sure how much the platform will cost me yet. My ID is re-costing the quotation as it was a add-on after he firts quoted me.

Maybe you can still nego with your wife to have only one wall in a very dark colour and the rest of the walls and ceiling white. That way, the whole house won't be too dark and you will have the best of both worlds,

I'll pm you my ID's contact (with the caveat that while he has not yet completed the reno for me, so far, he has met all my expectations.)

 

Share this post


Link to post
Share on other sites

Sorry everyone. Have been quiet coz my flu really knocked me out. Anyway, on to the reno...

Not as much done over the past week. But I don't mind. I am not in a hurry and I would rather my ID does a good but slow job then a quick job which would have problems later on. Main thing done is to build up the enclosure for my wall hung WCs. So evrything except the flush buttons and my toilet bowl will be hidden.

Master bedroom bathroom.

http://IMG-20160503-WA0003_zps4bm6c4xm.jpg

Common bathroom.

http://IMG-20160503-WA0002_zpsqtgje9bd.jpg

 

Share this post


Link to post
Share on other sites

I have also done most of my shopping for the house. 

For the kitchen, as I have mentioned earlier, it is not my top priority. Nevertheless, I didn't want to just get any old thing as things like built in ovens, hobs and sinks, if they were to breakdown in the future, it would be a real hassle to change. But I don't really know much about these appliances, so I just listened to a friend of mine and went to Teka to get what I needed in the end.

This is my Teka steamer oven. I wanted to just get a basic oven, but my friends convinced me to get a steamer oven as they say it is healthier in the long run. Also, I wouldn't need to get a separate steamer. 

http://Screenshot_2016-04-25-11-21-55-01_zpsf6m

Got the Teka hob. I was actually looking at a hob which coulod put four pots. But I decided that was overkill and got one which can put 3 pots instead. Why induction? Not due to design, but because I don't do any real cooking, maybe heat up water, soups, fry myself a steak , etc. Mainly western meals. Also I feel that it is safer. If I accidentally put my hand on the part where the pots should go, I will not get burnt.

http://Screenshot_2016-04-25-11-25-49-01_zpsq6i

Microwave also from Teka. Haha all my major kitchen appliances are from Teka lah.

http://Screenshot_2016-04-25-11-27-14-01_zpshfc

 

 

Share this post


Link to post
Share on other sites
On 4/25/2016 at 1:03 PM, JohnJohn said:

I'm stuck at home as I'm not feeling well. So, in between naps, I can update my blog. 

I have bought quite a few things already, all with the help of my ID. Actually, I only have my washing machine and TV left. Things like kitchen hob, fridge, shower stuff, all bought. I will update with the purchases soon. 

But today, got a decision to make - the top for my dining table. I went to etch & bolts yesterday to look for my coffee table and my dining table. The below is the coffee table I chose. I initially felt that the colour of the legs was a little shiny. But my ID said that since my place is mainly matte and a bit dark, this would be fine. What do you all think? 

http://Screenshot_2016-04-25-08-11-48-01_zpsrbl

Today my ID msged me as he wanted to know what table top I wanted for my dining room. This is the standard file photo for my dining table. But I can choose what type of wood I want. 

http://Screenshot_2016-04-25-08-11-19-01_zpsqgx

So these are the two choice. The first is American walnut and the second is ebony. What do you guys think? 

http://IMG-20160425-WA0000_zpsr0grzmg2.jpg

http://IMG-20160425-WA0004_zpsicjwjdbi.jpg

omg i love this! where did you get this table from ? is it expensive? 

 

Share this post


Link to post
Share on other sites
On 4/25/2016 at 1:03 PM, JohnJohn said:

I'm stuck at home as I'm not feeling well. So, in between naps, I can update my blog. 

I have bought quite a few things already, all with the help of my ID. Actually, I only have my washing machine and TV left. Things like kitchen hob, fridge, shower stuff, all bought. I will update with the purchases soon. 

But today, got a decision to make - the top for my dining table. I went to etch & bolts yesterday to look for my coffee table and my dining table. The below is the coffee table I chose. I initially felt that the colour of the legs was a little shiny. But my ID said that since my place is mainly matte and a bit dark, this would be fine. What do you all think? 

http://Screenshot_2016-04-25-08-11-48-01_zpsrbl

Today my ID msged me as he wanted to know what table top I wanted for my dining room. This is the standard file photo for my dining table. But I can choose what type of wood I want. 

http://Screenshot_2016-04-25-08-11-19-01_zpsqgx

So these are the two choice. The first is American walnut and the second is ebony. What do you guys think? 

http://IMG-20160425-WA0000_zpsr0grzmg2.jpg

http://IMG-20160425-WA0004_zpsicjwjdbi.jpg

omg i love this! where did you get this table from ? is it expensive? 

 

Share this post


Link to post
Share on other sites

Just a quick update. Looks like my dining table is done. But, it looks really short. I figure it must be the angle of the shot as it is supposed to be a 180cm table. 

http://IMG-20160506-WA0001_zpsfhtebcjr.jpg

 
  • Like 1

Share this post


Link to post
Share on other sites
On 05/05/2016 at 10:50 AM, JohnJohn said:

I have also done most of my shopping for the house. 

For the kitchen, as I have mentioned earlier, it is not my top priority. Nevertheless, I didn't want to just get any old thing as things like built in ovens, hobs and sinks, if they were to breakdown in the future, it would be a real hassle to change. But I don't really know much about these appliances, so I just listened to a friend of mine and went to Teka to get what I needed in the end.

This is my Teka steamer oven. I wanted to just get a basic oven, but my friends convinced me to get a steamer oven as they say it is healthier in the long run. Also, I wouldn't need to get a separate steamer. 

http://Screenshot_2016-04-25-11-21-55-01_zpsf6m

Got the Teka hob. I was actually looking at a hob which coulod put four pots. But I decided that was overkill and got one which can put 3 pots instead. Why induction? Not due to design, but because I don't do any real cooking, maybe heat up water, soups, fry myself a steak , etc. Mainly western meals. Also I feel that it is safer. If I accidentally put my hand on the part where the pots should go, I will not get burnt.

http://Screenshot_2016-04-25-11-25-49-01_zpsq6i

Microwave also from Teka. Haha all my major kitchen appliances are from Teka lah.

http://Screenshot_2016-04-25-11-27-14-01_zpshfc

 

Hi bro,

I'm looking to renovate my place really soon and your design sounds bold and great. I'm also looking at a cozy design and was quite impressed that your ID recommended something bold. At least it doesn't look run-of-the-mill. Do you mind sharing your I contact and how much he charges?

I also like this Teka steam oven and induction hob. Does it come as a set? Where did you get yours and how much does it costs? 

TIA!

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  


×