ocheeeng

$42 from Chuan Heng Hardware Trading Pte Ltd (132 Jalan Besar) Tel 62942397 Brand: Bossini Model: Paloma

Just hacked two of the painted walls on Monday to reposition two lighting points Painter will need to touch-up....will see if really need to repaint whole walls

My whole unit all painted with 3-in-1 already Too late

To clarify, is it all-in-1 or 3-in-1 difficult to touch up?

Do string curtains? Is it considered a divider?

All the paints I chose are 3-in-1. Got 1 litre packaging leh.

Not only floors...your walls sometimes will get scratched by the metal bars. Be sure they patch up and smoothen before painting.

familyof4: Are you doing false ceiling? If yes, better put floor protection to protect your existing floors.

I see. For the flip-down compartment, usable width should be around 55cm. You need to decide: How many power points in each compartment? Which compartment you want to place the TV point? Do you want to run wires for rear speakers?

A close-up The laminate is off-white. So hard to paint to cover.

2ft (lobang) + 2 ft(drawer) + 8ft?(two flip down) + 2ft (drawer) = 14 ft leh

I think the dimensions indicated on the featurewall/tvconsole diagram got problems leh.... 2ft (lobang) + 2 ft(drawer) + 8ft?(two flip down) + 2ft (drawer) = 14 ft leh

If you see colors that you like in other series, the paint shop can mix for you one. For example, you want to do color A found in EasyWash series but in 3-in-1 Medifresh flavor, paint shop can mix for you.

Depth of feature wall is 4" or 10cm (standard). Depth of console is 20" or 50cm (same as mine). Less off the power sockets, usable depth is around 45cm. Height of console is 11" or 28cm. Usable height should be around 15cm if you are doing roller tray. Roller tray takes up 3-4cm. Where do you intend to place the TV? Centre of two flip down? Total length of two flip down is how long (cannot see clearly in diagram)?

End of feature wall to end of console is 10ft?

Smallest ones are single tube 10W.

If buying DL that can accomdate both 2x13 and 2x18, make sure that the ballasts are 18W ones. If you get 13W ones to support 18W, they won't light or won't last.

Cannot see the diagram. Too small

No point building a base that cannot hold securely your fridge. Edited: Best that you have dimension of the fridge you wanted to get and then do a base with allowance for ventilation.

Did you try dish detergent?

Hi XBB, Fridge base depth should be around 80cm to accomodate most fridge. Fridge depth ranges from 60cm to 70cm+.

Mine is laminate. Non-black laminate joint lines are like that one lor. I don't mind lah knowing the limitation of laminates. But my wife did complained to the contractor. Not sure what will he do.

If you don't intend to put woofer below the console or you have slim flat type of woofer, height around 25cm (from floor to bottom of console)? If you do the console too high, your TV will need to adjust up accordingly and may not be at your eye level.

Hi Rasp, I had my concerns about the infra-red remote controls too. My contractor assured me that they have tested and no problem. If it does not work well, I will get him to change

The problem of using cable length that is just nice without any allowance:P. Disconnection with just slight displacement. Regardless whether you have shelf or not, the wires will come out together with the device when you shift the device out