wolflet

my family has been using neo garden for few years now. like their quality and service so far

from what i heard (friends and relatives) sealy mattresses tend to have quite severe motion transfer. so if its going to be slept by 2 persons, do not go for sealy. if its a single bed. then its very good.

u can try looking around the shops in sim lim tower. should have what u want

do a small plaster L shaped box up. should look just like a tiny beam running the length of the ceiling.

i took over keys on may 16th. let the seller kept 1 mailbox key. initially got quite alot of mail. these days, the numbers are gradually reducing. Since my place still renovating, and i wun be moving in till sept. i decided to change the lock once i move in. till then, the seller will collect his letters himself

i tried sealy, serta, simmons, maxcoil, omazz and lotus. in the end, wife preferred the serta. i'm divided between the serta and omazz, so went along with wife's decision.

i did mine. was installed by the contractor who did up all my windows.

good luck with ur meeting with *** tonight. hope u find your ideal ID soon

Balcony Floor Living room false ceiling MBR false ceiling

Back of hollow block wall and WM kerb Refrigerator kerb Kitchen Kitchen pocket sliding door Cove lighting for living room (tv feature wall will be on far wall)

Ceiling works completed. Plaster walls almost fully done. Tiling completed. Doing up plumbing tomorrow and also carpentry measurements. Entrance kerb Conduit for opennet Plaster wall for switches Common Toilet Entrance Common Toilet

length of wall? full height / half height?

i asked my ID. she said its only around 30% cheaper as compared to doing up new cabinets.

the mounting bracket should be available in sim lim sq or sim lim tower. just have to know what kind of mounting bracket your tv is using. have to check your tv manual. mounting. i think can ask the carpenter who did your feature wall to install for you

anything more than 6ft will have to be multiple pieces coz our lift max can allow 6ft. if u use frosted glass, will have a green tint. use painted glass instead, where they apply paint to the back of the glass to achieve the colour.

dunno leh. carpentry usually only saw dust. should not be too hard to clean off. tomorrow i check with my ID whats the sequence like

its actually a 2 piece lock held together by 2 screws. just remove the screws and the lock should come apart with minimum damage to your gate. this kind of lock easier to manage with 1 hand in cases where u are carrying shopping bags. normal conventional locks needs 2 hands to operate as u need to hold on the the lock

i'm not sure. but it makes sense to polish before carpentry. else the tiles below the carpentry works will not be polished

where can i get a 8 port cat6 patch panel? any idea the rough pricing for the item? actually i intend to just use the normal faceplates. or just connect rj45 jacks to the cable end and plug into my switch. since its all concealed in the cabinet...

i think most system 3 inverter systems are available around 2.8-2.9k without brackets.

back then, i suspected the back pressure of water caused the heater to be kept on. tried this method and it worked. but.. dunno if its what i thought anot? either way, if it works, its fine with me

you did it yourself? or did the electrician u engaged did it for u? my electrician told me he know nuts about patch panel

lower room height if ceramic tiles "pop" the homo tiles on top will also be affected

can diy. i believe the locks comes with the allen key to install

boxing up is to beautify the place. but also causes problems in future if pipes are leaking or needs to be replaced.