fierydragon

I would like to know a ball park figure for the removal of a long bath and its sides of tiles and makeover the flooring and walls with replacement tiles. In addition to this, I would also like to know the approximate cost of removing a shower cubicle and taps/showers and replace damaged wall tiles. Any contractor interested in this small job, please call me at 96332101.

I would like to know a ball park figure for the removal of a long bath and its sides of tiles and makeover the flooring and walls with replacement tiles. In addition to this, I would also like to know the approximate cost of removing a shower cubicle and taps/showers and replace damaged wall tiles. Any contractor interested in this small job, please call me at 96332101.

Any shops selling tiles should stock them. This type of tiles come precut in jigsaw parcel fashion. All you need to do is to stick them on(starting from floor level) upwards using Maxbond(a light brown adhesive meant for light fixtures. It comes in a tube($4.40) like silicon and needs a gun to apply.

Sim Lim and all electrical shops along Jalan Besar and Geylang

Can buy in Giant, Carrefour or The Store inJohore Bahru

It is not correct to mount First Aid Boxes on the wall. In cases of emergency, you may have to bring whole box to the accident scene. Do not forget that medication has got a shelf life. Therefore it is imperative that you replace with new items from time to time.

Check your basin regularly as the bloody NEA will fine you for $200 for breeding mozzies.

This shop is at the corner next to the famous Sungai Rd Laksa shop. The tape for covering the side of the boards are sold in reels with various standard sizes available.

Bring one pc sample to Geylang. Forgot name of shop, but it is a hard wareshop between Lor 15 and 19.

My dear friend, Obviously I am trying to be sarcastic basing on the advice given by HDB How to screw/unscrew without a screwdriver, Ha Ha Ha Don't forget I am a DIY man too.

Don"t you need a acrew driver for the job? In'nt the screw driver a tool.?

Even this will breed mosquitoes and NEA will book you for $200 Cannot buy anything worth your time for less than $15. At least 20 dlrs Better buy table top model from Carrefour in town Something I built myself at a total cost of about $300.00

Even this will breed mosquitoes and NEA will book you for $200

Sory duplicated posting

I built my own water feature/pond all on my own. First you must have an idea of what you want. The points you need to know ahead of buying materials is" 1.Size? 2.Just water feature or with Pond 3.Indoor or Outdoor 4.Materials and Design 5.Pumps/Filters 6.Plants(Aquatic or partially submerged) 7.Power Point and Water supply Assessibility 8.Budget. Some flower gardens and Big aquarium shops do sell pre assembled units and you can actually save cost by buying the materials and cementing it together. I have helped a few friends set up such feature, but I cannot advise you unless you decide on the above 8 baiscs. A basic simple one will be to buy a rectangular black fibre glass/vinyl tank and surround it with cement blocks, bricks or large stones. Accessories can be added later on depending on your budget and interest.

At a hardware shop in 18 Marsilling Lane. #01-257. Actually, it is not difficult to find, as it is a big hardware shop situated at the ground floor at the entrance to the car park. I bought only about 3/4 roll as I only needed to do a small wall. It cost me about $65. The shop 's name is Yong Teck Hardware and the tel is 63675519

What is the normal cost to install a overhead ceiling fan, but mine is not a normal installation. Job Scope Drill strong anchor point in ceiling Drilling anchor point through hole in false ceiling. Can use existing hole by removing round lights No wiring required- Power can be tapped from existing light point in ceiling No regulator required No switch required (Fan has strings to on/off/control speed) Installation of Fan Patching up hole after installation. All materials supplied by me. How many hours to do job?

Bought a "so called imitation leather" sofa from Defu Furniture at $1,050 but after 12 months, the sitting and back areas started to be have air bubbles, and later they burst and the "skin" started peeling off. It seems sythetic material from China and many people got played out. Was very impressive when new.

Any carpentry con out there who can make a Bar counter with plywood and laminates. Simple sketch( not to scale) can be provided by me

If you are on a budget, visit IKEA at Tampines. They have a wide range of curtains and easy to install rods for budget concious people.

Ask the officer to come and do it for you. How to tighten without tools? If it is aluminium windows, most probably you need a drill (to remove the old revits)rivet gun(to install new rivets),or a self tapping screw to tighten it up.

Most probably, you have hit one metal pipe buried in the wall. Try drilling another hold 3 to 5 ins away from the first hole. Patch up the first hole witrh putty. If it is white tiles or wall, it will not be noticed.

Try buffing it with a chamois cloth. It works for me, but it is real hardwork

What is the most unrealiable brand of electronic hardware in the market. What I am saying is what is the most frequently break down brand? PM if you if you prefer to keep it between us. I have something to share with you too. Out of the 6 electronic equipment, I bought from this brand, not one lasted for more than 6 months. I bought them because they were the cheapest in the market, but now I have to spend more, as I have to throw them away and buy better brands. Even Garung Guni man do not want this brand. So disappointed and angry

BECAUSE he saves on his water bill, he can afford to buy a Lexus. Call the govt agencies. Washing with a hose is a national offence.