Hi,

I would like to have some ideas on how to box up the aircon trunking.

For a corner of my Master Bedroom, the aircon trunking is kind of an eye sore. I asked the air-con guy to put in additional trunking to hide the hollow part of the wall.

Then i used a patty to cover the lines that divide the trunking and used paint to paint over, just like its part of the wall.

I've also seen my contractor using some aluminium sheet to box-up as well. Do you know where can i get these kind of aluminium sheets?

Can anyone share your ideas if you've done your own box-up?

Thanks! =)

can post a pic of current condition?

can post a pic of current condition?

I'll go take the pics and post it here during the weekends. =)

I'll go take the pics and post it here during the weekends. =)

Hi, this is for my BR3.

This is for my BR2.

The boxup that i've done is like the above, putting another layer of trunking to fill the gap. Then use patty to close up the gaps and paint over it.

Another way is to put a piece of thin wooden board over the trunking, then paint over it.

I think it should be less obvious to the eyes than putty covering the gaps.

Neighborhood hardware shops sell wooden planks but cutting them to the size you want may be tedious.

Simplest way is to ask contractor do a plasterboard over it. Confirmed nice-looking

I done so for my house

Edited August 2, 201115 yr by stardust205

Another way is to put a piece of thin wooden board over the trunking, then paint over it.

I think it should be less obvious to the eyes than putty covering the gaps.

Neighborhood hardware shops sell wooden planks but cutting them to the size you want may be tedious.

Simplest way is to ask contractor do a plasterboard over it. Confirmed nice-looking

I done so for my house

Hi, i've thought of it before but wooden planks need to have a bracket to be mounted on the wall right?

For me, i have some gypsum board but am not sure how to use the board to cover it.

I do not want to pay my contractor to do the boxup loh...

icic.. Kudos for your spirit to hands-on urself. =)

Try google "how to install gypsum boards".. quite a few links/videos popped up.

Hi, i've thought of it before but wooden planks need to have a bracket to be mounted on the wall right?

For me, i have some gypsum board but am not sure how to use the board to cover it.

I do not want to pay my contractor to do the boxup loh...

gypsum borads sometimes also required mounting... anyway, nice job done! i believe a few layers of paint is enouf to fool the eyes of others!

icic.. Kudos for your spirit to hands-on urself. =)

Try google "how to install gypsum boards".. quite a few links/videos popped up.

Thanks alot stardust! I'll post my pics if i successfully did it. =)

gypsum borads sometimes also required mounting... anyway, nice job done! i believe a few layers of paint is enouf to fool the eyes of others!

Hehe... thanks! Ya, i've got the area painted and it looks like part of the wall. Its the cheapest way to do a box up! The wall patty is really very handy and good to use! Hehe...

But the gypsum board is abit brittle. I can use my fingers to snap it. I wondered if it can hold on long or not...