Ark7

Hi all, Anyone know where can i buy them?? Thanks.

like what Bro wolflet and andymion say better be safe bro. I reno payment term are 40% once confirm, 30% when wet job are complete and 30% 7 working day after completion.

Think ID firm is the ID itself is contractor and contractor with in-hse designer is.....u should knw wat i wanna say lah.

Hi bro, your carpentry work look ex but if u using high end lamination and complex design than i don knw how much liao. your kitchen top 11.5ft huh? your hacking & dismantle look a little ex, also your kitchen floor area got 190sft? and your wall area at350sft? What wooden door you using huh ? 470 with beads design your beads how much huh? your ceiling how many sft for lower ceiling and L-box? you staying in which type of flat? why general cleaning and acid wash for whole house so EX 1? think u need to compare quote from others. Cheers.

Bro, from my understanding all hdb license dont need to pay wan and for haulage fee also contactor prob. think you can check with arthur about this. Cheers.

here some comment to share. To demolish existing floor tiles at kitchen area. To demolish existing kitchen cabinet cement base at kitchen area. To dismantle existing top & bottom kitchen cabinet. To demolish existing (5X4)ft wall between kitchen & dining area. To dismantle existing aluminum sliding window for whole house. To dismantle existing aluminum sliding grilles for whole house. To dismantle existing simple cornices **** & dining area. To dismantle existing floor skirting ****, dining, balcony & 03 bedrooms. To dismantle existing full height wardrobe at master & bedroom 2. To dismantle existing full height shoe cabinet at foyer area. $1,750.00 looks ok. To supply & lay (300X300)mm matt homogenous floor tiles at foyer area.(@$3/-psf). $450.00 ($3 psf is labour material and tiles?) To supply & lay (300X600)mm matt homogenous floor tiles at kitchen area.(@$3/-psf). $1,020.00 To supply & overpath cement screeding at kitchen wall. ($950.00 agree with bepgof.) To supply & construct cement base for kitchen cabinet, fridge & washer. $390.00 (ok) To supply & install stainless steel rubbish chute at kitchen area. $230.00 ( should be cheaper) To supply make good & cement smooth surrounding wall opening between kitchen & dining area. $200.00 (ok) To supply & change existing pipe to copper piping for at kitchen & 02 bathrooms area.$650.00(is your 2 toilet beside kitchen?) To supply & install 02nos hot water point piping at 02 bathrooms.$180.00(ok) To supply labour to install kitchen sink & lever tap. $100.00(ok) To supply inlet & discharge piping for kitchen sink & washing machine. $130.00 (should be FOC) To supply labour to install bathroom accessories for 02 bathrooms $70.00 (should be FOC) To supply labour to install 02nos mini Bidet spray at 02 bathrooms $50.00 (should be FOC) To supply labour to install 01no storage tank heater at common bathroom. $95.00 (no comment) (you are renovating whole house install accessories and Bidet spray should come free mah.) To erect false ceiling & light pelmet **** area. $650.00 (wat's the measurement?) To erect false ceiling, light pelmet & curtain pelmet at master room. $920.00 (wat's the measurement?) To supply & install (Floorich) laminate flooring c/w skirting ****, dining, balcony & 03 bedrooms. $4,180.00 (no comment) To fabricate & install (3X7)ft full height clear mirror c/w solid ply backing. $590.00(no comment) To fabricate & install 4ft(L) full height shoe cabinet with solid ply in laminate finish. $940.00 (Should be able to do at $800) To fabricate & install 4ft(L) full height panel with solid ply c/w shelves in laminate finish. $720.00 (ok) To fabricate & install 12ft(L) low storage cabinet with solid ply in laminate finish. $1,520.00 (Should be able to do at $1,200) To fabricate & install 9.5ft(L) TV wall feature with solid ply c/w clear mirror/ shelving & 3ft(L) storage $2,900.00 (no comment must see design) To fabricate & install 9.5ft(L) low TV console with solid ply c/w drawers & compartments in laminate. $1,350.00 (Should be able to do at $1,100) Ultimately that will depend on the lamination you choose, if you are choose the range that need to top up the price will definitely be more costly. Wat's a solid ply? ply and solid ply are the same thing. To fabricate & install 06nos panel collapsable door with solid ply c/w upper tracking & clear lami glass $3,150.00(no comment) To fabricate & install 5ft(L) Bi-fold window with solid ply c/w lourves in white spray paint finish. $720.00(ok) To fabricate & install 5ft(L) suspended service counter with solid ply in laminate finish. $260.00(ok) To fabricate & install 44ft(L) top and bottom kitchen cabinet with solid ply in laminate finish. $4,840.00(ok) (45 degree Silver ABS trimming/3nos frosted glass panel/ cutlery tray/ dish strainer/ 2 way track.) To fabricate & install 26ft(L) solid surface kitchen top. (Imperial) $1,950.00 (ok) To fabricate & install 3ft(L) low cabinet with solid ply box up rubbish chute area. $280.00 (ok) To fabricate & install 5ft(L) low storage cabinet with solid ply c/w solid surface top in laminate finish. $870.00(ok) To fabricate & install 14ft(L) frosted tempered glass panel c/w wood backing. $890.00(no comment) To fabricate and install 8ft(L) wardrobe with solid ply c/w swing door in laminate finish. $1,760.00(about there) To fabricate and install 3.5ft(L) full height panel with solid ply c/w 04nos shelving in laminate finish. $860.00(about there) To fabricate and install 2ft(L) full height false wall with partition board in paint finish. $200.00(ok) To fabricate & install 12ft(L) full height wardrobe with solid ply c/w swing door in laminate finish. $2,700.00(Sould be able to do $2,400) To fabricate & install 3.5ft(L) low chest of drawers with solid ply in laminate finish. $500.00(how many drawer?)(if 3.5ft 4draw about $400) To fabricate and install 5.5ft(L) low headboard with solid ply c/w cushion upholstery in veneer finish. $560.00(ok) To fabricate and install Queen size bedframe with solid ply c/w storage in veneer finish. $1,100.00(no comment) To fabricate & install 02nos bedside table in laminate finish. $420.00(ok) To fabricate & install 2nos 2ft(L) vanity storage cabinet with mirror in laminate finish. $660.00 (no comment) To fabricate & install 3ft(L) top hung & 1ft(L) tall storage cabinet with solid ply in laminate finish at $570.00(no comment) same things apply depend on the lamination you choose. To supply & install white powdered coated aluminum sliding window c/w tinted glass panel at $2,990.00(wats the measurement) To supply & install white powdered coated aluminum casement window c/w glass panel at kitchen only. $ 290.00(wats the measurement) To supply & install white powdered coated aluminum sliding grilles for whole house. $1,690.00(wats the measurement) To supply & install 01no Wrought Iron gate & fixed panel at main entrance. $920.00(how big is your fix panel?) To supply & install 01no swing door with 12mm clear tampered glass c/w floor spring at kitchen entr. $650.00(good price) To supply & install 01no frameless shower screen with10mm (thk) clear tempered glass at master bath $350.00(good price) To supply & install 01no frameless shower screen with10mm (thk) clear tempered glass at comm bath $490.00(ok, so your common toilet width huh?) To supply & paint whole house wall with ICI emulsion paint. $1,450.00(ok) To apply for haulage service includes sand/stock up/ clear debris by contractor. $350.00(should be FOC cause you are doing wet job) To supply & install Goodrich wall covering at master headboard area only. $850.00(no comment) FOC To supply & lay protective covering for whole house. FOC To supply & paint main door & 03nos bedroom doors in ICI glossy white paint. FOC To supply & install additonal 3ft(L) solid surface top for rubbish chute. FOC Total $52,455.00 Cheers hope it helps.

U will save money but not time. that the ultimate concern for ppl which gotta work, unless clear leave or so. by the look at it should takes u 2 weeks to completed if i'm not wrong. Cheers

if house with furniture most likely they will include protection fee bro. Cheer;-)

Bro your reno and my are about the some beside the tile, Install rubbish hood at kitchen area, design handles & cutlery tray are different but 1 thing for sure my contractor nvr charge me Disposal of debris(if you are talking about debris for old carpentry and tile etc which you are doing for reno), Uplifting all building materials from void deck to renovating site, General cleaning upon completion and lay protection cost and also touching up of unsatisfied area is within the project no cost involved too as it's the services he's give. Cheers;-)

thank for the add on missed out the thing....Lol bro ionmom this are some detail u need to get before u able to have budget for reno work. Cheers;-)

believe direct co that's do individual items will save some cost, but personally find that getting a contractor to arrange everything for u will be much easier and time saving thought it might cost u a little more, but save the trouble for arranging it yourself and also if anything screw up u have a contractor to answer for it. just my thought Cheers.

Bro, think 30+k maybe contactor can do it by the look, but with the length of cabinet and things like which type of doors, material and etc in detail it would be easier for a budget breakdown. Cheers;-)

Wah.....don't knw til now that branded brands solid surface are that ex. i'm using co-top design solid surface price about 90+ that what my contractor quote.

bro what's bro budget for budget reno very subjective leh??? i can check with my contractor for quote. Cheers;-)

U a freelancer??? think u can suggest to the thread starter. i have done my reno liao. Cheer;-)

getting freelance 3D studio max designer for a view think market rate is 300 - 500 buck. some contractor or interior firm offer free 3D drawing but don't knw what software they use. my contractor give my 3D layout with 3D studio max. Cheers;-)

Wah don't look right to me.... what the solution??? Cheers;-)

bro, think you need to get a detailed breakdown quote like hacking normally the price is with debris but it seems too cheap to me liao. carpentry work very reasonable $180 per feet good price. solid top about that price too but you using which company solid top? Cheers:-)

Bro, u check with him on your quote already? how was it? Cheer;-)

yap the drainage hole are inside. personally like this contractor workmanship and after sale service too. Cheer;-)

here my toilet Cheer;-)

Hi all new here don't know where to share my photo so decide to post in reno work section. here photo of reno work done at my place. Cheers;-)

Bro, think you can check with other ID/contractor to compare price also. i recently just completed my kitchen and master toilet and change new door maybe u wanna call him and compare price but i don't think he's the cheapers around but the workmanship are good and always keep work place clean. Can pm u the contact. Cheers;-)