user123

Take a look at the pics. Will you accept these kind of workmanship? Super pissed off with the contractor, already delayed 4 times and finally done up with such workmanship. first, second and third delay says the tempered glass cracked at the thin area where the hole for the switches are. Fourth time, manage to send the glass to my home but they forget to open another hole for the switch and keep insisting I put on a new switch without telling them when they did the measurement. Ok, now fifth time, the hole for the switch opened offsetted, WTH!

oh yup, I'm refering to the frame... that one done by your contractor?

Hey floppy, where do you get the white plastic that hide the LED strip from view?

Hi, For those using all white laminate for kitchen cabinet, can u see the black joining line at all the edge of the doors and the frames? I saw some ready make white tv consoles, shoe cabinets, the edge are very smooth and u don't see a single black joining line. but my kitchen cabinet can see all the edge joining lines. the ID told me because the back of the laminate is black color and when they join, the edge sure can see the black line, is this true?

I am also doing an all white kitchen cabinet, and i notice the edge joining part can see the black line... is this ok for those who have white laminates cupboard? The carpenter told me it's common because the back of the laminate is black, and when join, the edge sure can see the black line. is this true?

For the benefit of those who want to see how using LED strips instead of normal T5 as cove lighting. Previously I have been searching all over the forum but none can give any help. Just go ahead with the trial and error and it turns out to be too good! Not as bright as T5 but bright enough. The color here is warm white (3000K), LED size: 3528 90LEDs per meter. Uses 2x 12V 2.5A and 2x 12V 5A adaptor.

For the benefit of those who wanted to see how KDK v56 looks like on the ceiling.

where do u get for $165? Thanks

For those using downlight, do you see light seeping out between the light plate fixture and the lightbox or is the fixture perfectly sealed to the box that you can't see light seeping out from the edge?

Hi, Is it normal that there is a gap between the cove light holder and the L-box? Can't see but when you put your hand under the cove holder, you can feel the gap and also the light from the downlight bulb will split out and shine on the ceiling. Is this normal? Or it should be totally sealed? If not sealed, I'm afraid insects will go in and make nesting...

False ceiling

Yes, on site measurement for quote, more accurate

In the midst of the reno, ID suddenly call me to say I need to pay $300 to the person incharge of my area (Punggol) to buy sand for the kitchen cabinet base... just a little bit area cost $300?? Am I suppose to pay this amount or the ID suppose to pay?? She also ask me to pay separately to buy the tiles! What was stated in my quote:- Supplying of materials and labour to construct kitchen cabinet base with matching tiles - $350 (about 15ft) Can anyone pls advice am I suppose to pay these extras?? Thanks

I was thinking of DIY too, luckily didn't cos when I saw then cut the hole for the downlight, I was like "OMG thank goodness I didn't DIY and it's no no for an already stay in flat, cos the the dust from the plaster will cover ur entire flat! " For contractor, refer to http://www.renotalk.com/forum/index.php?sh...mp;#entry592817

Mine not done by kowyee, but other factory in Woodlands, price cheapest among few I have checked on.

I need Mr Chew and Cindy contacts too :0 Thank!

For those who using glossy solid surface, any problem with finger prints and oil marks? My mum cook and fry very frequent, but I like those glossy solid color like white, grey and bronze shown in few previous replies here..

It is normal that the line between ceiling and wall to be painted a bit crocked or do I expect a perfect straight line? I saw the paint at these corner like a bit wavy, should I accept it?

Yes, DC12V 7.2W/m or 600mA/m size = 3528, 90LEDs / m 1 roll = 5m = S$40nett (strictly non nego cos this is the cost price, I don't earn a single cents as the pricing is very transparent) color = warm white Got 4 rolls extra

Some sample of the LED strips used in my current home Under kitchen cabinet Just stick it on top of curtain railing Behind Feature wall and under TV console

I have received the LEDs and all are in good quality. However I am giving up 5 rolls of 5meter size 3528 90LEDs per meter. If u r interested pls msg me..

Any recommendation for instant heater? Which place sell cheapest? Alpha, Elmark, 707, Ariston.

Dimension specs only differ by 2cm, no problem.

Means if I use E27, once the light spoil, I can easily buy the bulb and change it myself, right? And no noise from the defect ballast as well

I got V56VK from KL for RM460...the only different is, Spore version got 7speed, Msia version got 5Speed only, the rest is still the same.