dev

Can get cheap PLC lighting at Choo chiang (Ang moh Kio) below $20 bucks each with bulb.

Hi ugene512, U meant they quoted you $100 pfr for the first 20 feet with ext and int laminates. Does it include softclose?? May i ask who id your sales person? Hope to hear from you. Thanks alot . Hope i can get ext + int laminate @ $100 too ..

Hi all, I have got quotation from suppliers recently and below is the price range from a few of them: Supply & install L-shaped top & bottom kitchen cabinet : $90-$120/ft ( some provide free softclose, dishrack) Supply & install solid surface top for L-shaped kitchen cabinet - $80/ft (depands on brand; LG brand should be on higher side) Supply & construct L-shaped cement based for L-shaped kitchen cabinet - $200-300 Supply & construct cement based for washing machine and fridge area - $90ea Supply & run piping for kitchen sink (sink & tap supply by owner) - $60-$90 Hope its helpful

Have Limited designs: http://www.beds.sg/home-decor-lifestyle/3d-wall-panels.html

You may contact Vincent @ 81123619. His quotation for glass, mirror & shower screen quote resonable. Only does for direct owners. Pls tell him recommended by Devi. I have not tried his work yet as pending to complete other works first.

Ok already meet the sales person (Jords). Mentioned that theirs is good quality plywood from India/Indonasia. (5 plywood compressed together) He say very good quality but i dunno much as no experiaence. He quoted me the following: $100/ft for kitchen cabinet with softclose(Italy brand) ((Interior : white pvc, Exterior : Selected laminates from Donotti) $115/ft for kitchen cabinet with softclose(Italy brand) ((Interior : Selected laminates , Exterior : Selected laminates from Donotti) Then he mensioned that Built-in W 600mm Stainless Steel Dish Rack w/Aluminium Glass Door is chargable at $180. Any comments people??

think got quite alot of advertisement on classified newspaper. Can find there. I yet to find mine as havent started my reno.. guess that will be the last part. Good luck

I got the following quote: Wiring + switches (for 16 downlight + 6 Clipsal switches):$450 Install PLC Light: $10ea Fan cw lights installation: $40ea 20amp:$120 Extend SCV Pt: $80 Extend 1 power pt: $30 Change switch: $25 Install of other dangling or normal light:$15-25 ea All switches( clipsal) provided but not a licensed electrician. Any feedback on the pricing? Can i go ahead if he is not a licensed elec.??

Hiyeoml, Your new kitchen has a very clean look. May i ask how much is the kitchen cabinet cost per foot & since you are having a suspended cabinet, did you construct any base? Can it support heavy pots? Also, your oven is suspended?

I am meeting someone from MY ID Factory today for my kitchen carpenty work. Hope it goes well. I will come back to feedback tomorrow

Hi There, I also contacted Inside Living for quotation. Since Jessie was busy, she handed over to another person called June. June did not call me at all after the first call. Then after 1 week i called her. She came to my place for site survey & measurement then said, she did up the rough quatation but forget to bring. Ok nevermind. Then, we we asked her some qus, her answer was " Have to check with my contractor" Ok nevermind too. Then she sais will email me the quotation on that very day but i told her not to rush, and can give me the quote in 2 days time. Still no reply from her for quotation. Already the costomer service very bad how to give them the reno work.. this is just my experience with them..

I am also planning of overlaying my tiles for kitchen + 2 toilets; Below is a quote i received from ID. Think contractor can give better: Mansory Works Overlay both toilet floor by matt homogenues floor tiles $1100 Overlay kitchen floor by matt homogenues floor tiles $800 Construct kitchen cabinet base and fridge base $350 Touch up hacked wall and yard wall $350

Anyone tried "My ID Factory" before? Btw, if you get carpentry people to do up the kitchen cabinet, will they help to install cooker hob, hood, sink??

Hi all, I got the following quote: Please help to advice if any over price and do renovation works normally include GST? Quotation for HDB 5 room flat minor renovation Quotation for HDB 5 room flat minor renovation DESIGN SERVICE FOC 1 Interior Design and space planning layout FOC 2 Consultation selection of home furnishing FOC 3 Perspective Drawing FOC 4 Job site co-ordination FOC 5 Provide chemical washing for whole house flooring FOC 6 Provide floor protection sheet for affected area FOC 7 Submission for HDB Approval FOC 8 Arrange of laying pub gas pipe FOC Demolish Works $1,000 1 Dismantle existing living hall alter cabinet Include 2 Dismantle both bathroom toilet bowl and basin Include 3 Dismantle both bathroom door and door frame Include 4 Hacking off existing balcony wall (Half height) Include 5 Hacking off existing service yard wall tiles and stove support Include 6 Provide sand, transport material and debris removal Include Mansory Works 1 Overlay both toilet floor by matt homogenues floor tiles $1100 2 Overlay kitchen floor by matt homogenues floor tiles $800 3 Construct kitchen cabinet base and fridge base $350 4 Touch up hacked wall and yard wall $350 Ceiling Works 1 Construct L box for living hall $600 2 Construct false ceiling for bedroom entrance and foyer $450 3 Box up sewerage pipe by water proof plaster board for master bathroom and service yard $600 4 Designer false wall for cover bomb shelfter and tic tac door (6inch dept) $900 Plumbing Works $1,100 1 To provide labour to raplace stainless steel piping for whole house ( cold only )Hot only for 2 shower Include 2 To provide labour to install inlet / outlet pipe for Sink and Washing Machine Include 3 To provide labour to install 2 nos of Sitting Toilet Bowl Include 4 "To provide labour to install 3 nos of Wash Basin To provide labour to install 2 nos of Instant Heater" Include 5 To provide labour to install both Bathroom Accessories Include Design and fabricate 5ft vanity cabinet with full height glass shelves $1,300 1 Selected Laminate Include 2 Internal carcass in color pvc finish Include 3 casement doors in ABS trimmings Include 4 Using the imported solid ply-wood Include 5 Solid surface work top Include To design and fabricate 36ft top and btm kitchen cabinet $4,320 1 Selected Laminate finish Include 2 Internal carcass in color pvc finish Include 3 casement doors in ABS trimmings Include 4 Using the imported solid ply-wood Include 5 4nos of drawers, dish rack FOC 6 frosted glass door FOC 7 Supply and install 18ft solid surface work top for kitchen cabinet $1,440 8 Supply and install 15ft tinded glass backing $900 Total $15,210 7% GST $1,064.70 Grand Total $16,274.70

Hi there, can give me the contacts too for L-box + false ceiling. Thanks alot

Please see following for armaflex insulation details : http://www.armacell.com/www/armacell/ACwww...strialUKROI.pdf

Hi, Was quoted the following from Cool Serve. Hope it helps. Where did you get ur quotation from?? Supply and install 1 set of Wall Mounted Multi Split System 4 (Inverter), Mitsubishi Electric, MXY-4A28VA / 4 X MSY-GE10VA, Price : $3,380.00, Price with 7% GST : $3,616.60

Me too having the same mixed feeling..Get abit expensive with good review from Cool serve and Aircon designs or cheaper from GC or All Best or Best Tech with a mixed mind..

Want to buy MXY-4A28VA / 3 X MSY-GE10VA / MSY-GE24VA. Im still in a dilemma to get from GC or CoolServe($4000) or Aircon designs quoted me $3900. GC should be slightly lower price + think they throw in $$ voucher + 5 yrs extended warranty.. After many pp dun give good review on GC, my heart is sinking..How? any suggestions? Anyone can give good review on GC to boost my mind.. haha or any other recommedation?

Hi, Im too looking for System 4 Brand : Mitsubishi Electric ,Model : MXY-4A28VA / 3 X MSY-GE10VA / MSY-GE26VA for my living room + 3 bedroom. Any good lobang? Please pm me. thanks

Yes i have the same query: Would the water pressure be sufficient if using the instant water heater for rain shower?

Hi all, Does Rain shower set need storage heater or can just use normal heater? Storage heater must use gas conection? Thanks