Jump to content
Find Professionals    Deals    Get Quotations   Portfolios

OceanEleven

Members
  • Content Count

    1,098
  • Joined

  • Last visited

  • Days Won

    28

Everything posted by OceanEleven

  1. Afraid dont have any links to share, my purchase are about 3 yeas ago. Track ligh you may consider to purchase local. Cost wise, not as bad as dining/living lights.
  2. False ceilings should not house any creepy crawlies unless it is not done properly or crack over time. More of a concern will be L box instead, however after living with L Boxes for more than a decade, I have no problem with any insect growth or dust issue. L Box has its charm too as it create a lume of reflected light which is more evenly scattered around. False ceiling is a MUST if one wants down light, and false ceiling also can help conceal/ run wire and cable easily compare to no false ceilings. Without false ceilings, cable and wires are run in trunking (piping if industrial look) which some may not like it. Track lights not recommended for dining are, as track lights are more of a beam/spot like and focus on a area rather than "all around". Makes reading/looking tedious.
  3. Bought the same sink from Taobao. About $230. Still going strong till now. Like wise, I bought most lightnings from Taobao/Tmall. Local prices are really rip off. My ID saw my light selling for $300 at Balestier while I got 3 for $200.
  4. Guys, any good clothes steamer to recommend?
  5. Oven Tripping Circuit Breaker Tips. It is common for ovens, steamers and grillers to trip electrical circuit breakers when left unused for a period of time. Such faults can be easily rectified via these steps that Bosch has highlighted: 1) Set the temperature to 50 degree celsius n 'Top and Bottom Heat' mode 2) When the temperature reaches 50 degree celsius, increase the set temperature to 80 degree celsius; when it reaches the set point, increase again to 150 degree celsius, and follow the same to get to 200 degree celsius. 3) Once the temperature reaches 200 degree celsius, increase the set temperature to 250 degree celsius and let it remain at the temperature for one hour. 4) Turn off the oven It is always advisable to gradualy increase the oven temperature during the preheating process to avoid a sudden draw of high electricity which causes tripping.
  6. Glad that you moved on with the hacking. Carpentry are expensive. I rather spent the money to make a full height cabinet with TV mount, like mine.have storage and solve the console issue. Didnt know folks are still reading my blog, thank you, hope the sharing aide in some decision making. Thanks for the compliment. As for safety mark, it is a pretty grey area. If insists to have, be prepare to pay thru the nose. Many got it from JB, TB or Tmall, no issues so far. I manage to control my whole house lightings to below 1.5k. I prefer simple, easy to clean and maintain. The most fanciful one is in MBR toilet, ironically. My ID is Mr. Foo from Custombox, not J&E though.
  7. Couple of things to consider. Craft stones are nice and maintenance free. Buying from JB is much cheaper, especially if you have car to self-collect. I did this the last time, whole 20 boxes of it. However the labor to lay them is costly. Since you opt out the kitchen wall, you have limited storage space, due to one less wall for top hung and bottom cabinet. You can do an open concept kitchen, with a small bar counter with tall stools but kinda defeats the purpose as right in front is likely where you are gonna place the dining table. Also, open concept make air conditioning the living room a challenge. Depending where you place and size of your fridge, likely you will have limited table top space. Again since you opt for no wall, imagine you have to place the fridge, sink and stove along the 3675mm kitchen wall, leaving you will almost no top at all. You can consider hacking away the wall dividing the kitchen and service yard. I find such wall pointless and useless. Then you will have a bigger kitchen, looks more spacious and airy. However since yours is a new unit, hacking may require permit or totally disallow. Check with your ID. Combining BR1&3 may prove to be disadvantage in the long run. Especially when selling, most buyers prefer more rooms than space in rooms. Also since you had opt for flooring, ID may have problem finding similar flooring to replace the hacked walls. Looking at the floor plan, there is a pillar protruding out, which cannot be hack. Overall cost is much higher, as you need to make good the wall after hacking, relocate the door to the combine rooms. I remember door frame are not cheap. If you hack, you have to consider about air conditioning, a normal system 3 may not be sufficed to cool such a big area. I would rather to have BR3 as a gaming/entertainment room, with wardrobe built in. This way, any late night gaming will not interfere with you sleeping in BR1. Kids will grow up, eldest already 5 years old, in time will wanna have own room. Eldest will be 10 years old when MOP, if no intention to move again, BR3 can be revamp to be eldest room, leaving another room for the younger one. Just my two cents. Have a good reno journey.
  8. Headphone stand purchased from Tmall. Less than SGD20 each. Quality and finishing is good.
  9. I am actually quite keen to see how your ID proposes for the WIW for the MBR. Looking at the dimensions, you are left with 3.6m length to manage with. A queen-size bed is about 1.53m in width, leaving about 2.07m to fit in 2 bed size table and the WIW. So assuming having 2 x 30cm square bed side table, means you are left with only 1.47m length for the WIW, which I feel is very little. Even removing the bed side table, it is still only 2.07m, including bed frame and the partition wall to be erected for the WIW.
  10. ID and contractors are pretty much in a grey area nowadays. A contractor donned in shirt and pants can be an ID but an ID may not be a contractor. The diff is that contractors may be more hands on, likely more on site and able to visualize space, angles and technical aspect of things. Our floor plan looks fairly similar as yours and I went with an ID who looks like a contractor and never look back. Key point is talk to more people, have a feel what is on the table, have a sense of the person who are you working with. I never really like to sign on during some exhibition, let alone paying up $1k as retainer/designer fee. If needed, I rather take my biz elsewhere then. Like you, I am very picky as well as keen eyes for the details. My EA reno took 6 months and enjoy every moment of it. So knowing what you want is a good start, getting what you want in the most economical manner is the next challenge. Have a fun reno journey.
  11. Bought a pair of these speaker stand from Tmall. A little costly though after shipping. The machining and finishing is goo, no rough edges. Paint work is great, slight blemishes but not noticeable once speaker sits on it.
  12. Thanks for taking time to read through and hope the information will help you to build your dream home. Washroom tiles just the normal scrubbing now and them to remove grime and grit. If carpentry are expanding, more likely due to warping. Could be complete full length tends to warp over time or moisture remove from wood/ply wood, causing them to warp.
  13. Thanks for the kind words. Just that went thru reno twice and understood the agony and frustration during the journey hence wanna share a little to save on the efforts and time. Anyway, my comments are a little old school., may be a little pricky at times, kinda been there, done that. For eg non believer of hacking of rooms and WIW. Dont fancy those side by side fridges etc.
  14. Hi, contact sent. He is likely quite busy most of the time. SO you may wanna What App him them follow with a call later.
  15. Hi there, sent a message to you. Need a little patience with him. Goo things are worth waiting.
  16. So I guess you level the flooring and made the balcony look like part of the living room then.
  17. I see, this is a wise choice. White interior tends to turn yellowish and mouldy over time.
  18. Your contractor is good. At least he gave you laminated interior. Much much better than the normal white which are cheaper.
  19. Don’t gun down the idea of an ID so fast. Start with a budget and things you need. Some things needs to be done before you move in and not after you moved in on a bit by bit basis. To a certain extend if you need to take a small loan to reno the house, I believe it is still worth it. This is your home, where you make happy and sad memories, a harbour where you berth your thoughts and base your emotions.
×