Jump to content
Find Professionals    Deals    Get Quotations   Portfolios
Sign in to follow this  
cruise

Calcution For Kitchen Cabinet Quotations

Recommended Posts

Hi

In the process of obtaining quotations for job to be done for my kitchen, I realised various contractors have different method of quoting. Which is the most equitable and fair method?

Method 1 - For doing top and bottom cabinet, they calculate by adding the total length of the top + bottom x $ pfr

eg. Top = 8 feet, Bottom = 8 feet. So, they add together = 16 feet x $100 pfr

total = $1600

method 2 - top cabinet is $90 pfr; bottom cabinet is $100 pfr.

so, 8 x $90 = $720

8 x # $100 = $800

Total = $1520

method 3 - top + bottom / 2 x higher rate pfr eg $220 pfr.

16/2 = 8 feet x $220 = $1760

So tricky.....can people here advise which method is the norm?

thanks

 

Share this post


Link to post
Share on other sites
Looking for good contractors? Click here for your request

Even my contractor used Method 1.

Solid top was quoted seperately as below.

Measure the length of bottom cabinet (which needs to be covered by solid top) X solid top cost in pfr (per foot run)

If the contractor lumps the cabinets, Solid top together we can always ask for break-up so that we can compatre the quotes.

 

Share this post


Link to post
Share on other sites

Although top cabinet uses slightly less material coz it's recessed as compared to the bottm, but it still equates to the same amt of work to mfg the cabinets. So norm all contractors should be using Method 1.

 

Share this post


Link to post
Share on other sites
Hi

In the process of obtaining quotations for job to be done for my kitchen, I realised various contractors have different method of quoting. Which is the most equitable and fair method?

Method 1 - For doing top and bottom cabinet, they calculate by adding the total length of the top + bottom x $ pfr

eg. Top = 8 feet, Bottom = 8 feet. So, they add together = 16 feet x $100 pfr

total = $1600

method 2 - top cabinet is $90 pfr; bottom cabinet is $100 pfr.

so, 8 x $90 = $720

8 x # $100 = $800

Total = $1520

method 3 - top + bottom / 2 x higher rate pfr eg $220 pfr.

16/2 = 8 feet x $220 = $1760

So tricky.....can people here advise which method is the norm?

thanks

hi hi this is interesting to note! i've got another add on question for L shape cabinet...isnt there a double counting at the right angle then?

:o:o thats alot for top and bottom cabinet!!!!!!! not forgetting the granite top costs......omg correct me if i'm wrong pls

Edited by sng28
 

Share this post


Link to post
Share on other sites
Hi

In the process of obtaining quotations for job to be done for my kitchen, I realised various contractors have different method of quoting. Which is the most equitable and fair method?

Method 1 - For doing top and bottom cabinet, they calculate by adding the total length of the top + bottom x $ pfr

eg. Top = 8 feet, Bottom = 8 feet. So, they add together = 16 feet x $100 pfr

total = $1600

method 2 - top cabinet is $90 pfr; bottom cabinet is $100 pfr.

so, 8 x $90 = $720

8 x # $100 = $800

Total = $1520

method 3 - top + bottom / 2 x higher rate pfr eg $220 pfr.

16/2 = 8 feet x $220 = $1760

So tricky.....can people here advise which method is the norm?

thanks

Method 1 is common.

I agree with the saying that workmanship is important.

Beware some carpentry work uses some very bad China made, cheap quality laminate.

Some pfr can be as cheap as below $100.

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×