leen

eh, uncle mace, where can we get the metal soap dun put here and no stock in SG and let us drool leh and also where u get your mckenzie cleaning stuffs? any place where i can get everything at 1 go or not?

hi tingshen, most of the shops listed here is recommended by other forumers and their experience. personally i go to the following shops: 3) Universal Union 4) Everjoint (ang mo kio) 5) GENOVA INDUSTRIES PTE LTD 6) Poh Joo Hardware 7) Goh Ah Bee (kovan city, near kovan mrt) 8) Hoe Kee Hardware 9) BUAN SENG HUAT ELECTRICAL & GAS DEALER 10) ETRONIN ELECTROMART Blk 510, Bedok North Ave 2, #01-51 6444 7325 15) Federal Electronics Pte Ltd Mega Discount Store Katong Mall normally my load is not much. hb and my clothes only. i wash abt once or twice a week only. oh ya, forgot to add: the whole street of jalan bersah and kelantan lane that side; adamas, chuan heng, etc. all shopping centres shop, eg. harvey norman, best denki, etc. gd walking exercise

me oso... always donate to sg pools...

these are the quotes i was given for toshiba. toshiba system 3 inverter (got this combination as i need to cool a big hall and MBR) and i am installing 2 sets of system 3 (if i do decide on system 3) outdoor unit: RAS-3M23YACV - 24,000BTU/Hr x 1 unit indoor unit: a) RAS-M10NKCV - 9,000BTU/Hr x 2 unit + b) RAS-M13NKCV - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - S$2,780 b) Best tech - S$2,653.60 c) mega - S$2,550.00 d) hong huat - S$3,103 e) federal - S$2,398.00 toshiba system 4 inverter (if i get this combination, i would need to get 1 more single split system coz not enough for my hm) outdoor unit: RAS-4M30YACV - 30,000 - 34,000BTU/Hr x 1 unit indoor unit: a) RAS-M10NKCV - 9,000BTU/Hr x 3 unit + b) RAS-M13NKCV - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - S$3,730 b) Best tech - S$3,456.10 c) mega - S$3,400 d) hong huat - S$3,531 e) federal - S$3,400 if bracket is required, the prices are: a) h@ng ta - S$120 b) Best tech - S$150 c) mega - S$120 d) hong huat - S$100 e) federal - never state all piping and insulation base on manufacturer's spec. basically its either, armaflex, k-flex, thermaflex, totaline insulation etc. cu piping as per manufacturer's specs. piping and cabling all in pvc trunking. these are the quotes i was given for mitsubishi. mitsubishi system 3 inverter (got this combination as i need to cool a big hall and MBR) and i am installing 2 sets of system 3 (if i do decide on system 3) outdoor unit: MXY-3A28VA - 30,000BTU/Hr x 1 unit indoor unit: a) MSXY-GA10 - 9,000BTU/Hr x 2 unit + b) MSXY-GA13VA - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - (mitsubishi electric)S$2,900 / (mitsubishi heavy) S$2,680 b) Best tech - S$2,653.60 c) hong huat - S$2,950 d) all best - S$2,731 e) best denki - S$3,299.00 f) double-h aircond - 3,150.00 g) golden harvest - (Daikin only) S$3,400 for inverter, S$2,500 for non-inverter h) systematic airconditioning - S$3,100 mitsubishi system 4 inverter (if i get this combination, i would need to get 1 more single split system coz not enough for my hm) outdoor unit: MXY-4A28VA - 30,000BTU/Hr x 1 unit indoor unit: a) MSXY-GA10 - 9,000BTU/Hr x 3 unit + b) MSXY-GA13VA - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - S$3,730 b) hong huat - S$3,650 if bracket is required, the prices are: a) h@ng ta - S$120 b) hong huat - S$100 c) all best - S$150 d) best denki - S$110 e) systematic airconditioning - S$100 f) double-H - S$240 all piping and insulation base on manufacturer's spec. basically its either, armaflex, k-flex, thermaflex, totaline insulation etc. cu piping as per manufacturer's specs. piping and cabling all in pvc trunking.

hi hongss, like wat i say, pls send flr plan to them and call them up to ask for quotation. they r able to give you a more exact quote. btw, pls do not misunderstood, im no air-con seller, im from constrn line only...

u r cleaner man im yr new fan leh ya, u r rite... siao liao la, must go and see leh

hi tingshen, most of the shops listed here is recommended by other forumers and their experience. personally i go to the following shops: 3) Universal Union 4) Everjoint (ang mo kio) 5) GENOVA INDUSTRIES PTE LTD 6) Poh Joo Hardware 7) Goh Ah Bee (kovan city, near kovan mrt) 8) Hoe Kee Hardware 9) BUAN SENG HUAT ELECTRICAL & GAS DEALER 10) ETRONIN ELECTROMART Blk 510, Bedok North Ave 2, #01-51 6444 7325 15) Federal Electronics Pte Ltd Mega Discount Store Katong Mall normally my load is not much. hb and my clothes only. i wash abt once or twice a week only. i usually separate my clothes by white, light colour, dark colour and black (means all black and jeans) coz scare color run. and it takes abt 30mins to finish 1 load. but this is not a gd estimate as everyone of us hv different number of time so clothes changing. eg. for 1 quit cover, it take only 30mins. i throw 1 queen size quit cover, 1 queen size fitted sheet, 3 pillow cases, 1 bolter case, it will take abt 50mins. hope its a gd estimate for you guz to gauge.

thank u thank u Mace... i hope 1 fine day i can open my own biz in yellow page for our own SG ppl so dat they able to find quality stuffs at reasonable pricings... wei da de zhi yuan no la, i juz think its kinda refreshing looking at wat ppl like and like to use mah... see, i kay poh queen leh btw, you can try go wihardja, now they hving sales. and theirs is teak wood, duno u like or not. i saw some of their divider is like those old times decor that old kopi shop hv last time, with small color glass panel. the real beautifully engrave and colored with pics of birds and flowers type can be found at Whole Sale Teak Company. but i think shld be **** ex, i nvr go close see coz i dun need divider. they r having a sales from 15sept to 18sept 2007, open from 1 to 6 only. hv to call the boss and ask. he and wife ultra friendly and will explain to you all items if you hv query. and he say if you hv any special request after the sales, still can call him. Dav hp: 9852 8787 btw, dun misunderstood hor, i m no furniture seller har, i wk in constn field

maybe you like to try looking at ikea? they hv alot of range and quite inexpensive but you hv to assemble yourself. and what is the type of furniture that is in your hm now? there are many type of display cabinets. if you walk around at neighbourhood furniture shops, you can find some at quite reasonable price as well.

hi, the boon siew interior we are talking abt here is located at Bishan Central. i think its a different boon siew you are talking abt.

so uncle mace, nw where to buy har

hi, can't view yr pic.. izt this? 1) u can try looking up at this website for ideas. http://www.nextag.com/phone-bench/search-html but i think u can try looking at the following places. 2) vhive got this type going for $229 http://www.vhive.com.sg/listing.php?cat_p=...c=40&from=5 3) wihardja is a furniture company selling teakwood furniture. theirs are not so delicate but their prices are quite low for teakwood. they r currently having a sales from 14sept tp 23sept 2007. http://www.wihardja.com.sg/locations/index.html wat they hv is similar to this except that it got chinese carvings and look vy antique like. ppl will think u hv a piece of valuable chair at hm if u get this one from wihardja. the chair seat got a wood cover that can open and close to store your things. 4) another place that i hv visited is Whole Sale Teak Company. they r having a sales from 15sept to 18sept 2007, open from 1 to 6 only. hv to call the boss and ask. he and wife ultra friendly and will explain to you all items if you hv query. http://www.wholesaleteakcompany.com/html/t...re_catalog.html i saw this piece is very neat and nice but ovr my budget and hb won't allow... !! its going for S$499 (if i remember correctly) and the seat is white french sofa type and build on quality wood. or you can try the following thread where kind forumers there posted a list of teak wood furniture company and experience. one thing gd abt teakwood is that its durable and lasting and can be place under sun and rain and with minimum maintenance. http://www.singaporebrides.com/forumboard/...html?1186563899 TeakWood Furniture Compilation List 1)The Shophouse, 22 Lock Rd, Gillman Village, www.theshophouse.com 2)*Scanteak, 60 Sungei Kadut 3)Mirage Fineteak, 8 Lock Rd, Gillman Village 4)Ethnic Homes, 802 Upper Serangoon Road 5)Teakland Gallery, 20 Upper Serangoon Road 6)Goodfurn, 170 Upper Bukit Timah Road, Tel:6467-5976, www.goodfurn.com.sg 7)Helping Hand, 819 Upper Serangoon Road, thehelphand.3source.org/ 8)*The Home Merchant, 11 Changi South Lane, #01-01,Seng Soon Industrial Building, Tel:6546-2378, www.thehomemerchant.com 9)Colonial Antiques, 28 Lor Ampas S(328781) 10)PLANK, Park Mall 11)Natural Living, 9 Penang Rd #03-01, Park Mall, Tel:6334-8928, www.natural-living.com.sg 12)Wihardja, 175 Ubi Avenue 4, Pan Malayan Warehouse, Tel:6741-7717, www.wihardja.com.sg 13)X'tra Resort, 9 Penang Road #02-01 Park Mall Singapore 238459, Tel:6339 4664 14)Pasaraya Gallery, Kewalram House, 8 Jalan Kilang Timopr #01-01 S159305 15)*Marquez, Pasir Panjang Road (opposite PSA/NOL Building), www.marquezliving.com 16)Hendon Creation Pte Ltd, 1 Irving Road #02-00, Neo Industrial Building, Tel: 6289 9379, www.hendoncreation.com 17)Ethnic Woods, #04-08 Paragon, Tel:6737-3440 18)John Erdos Gallery, 83 Kim Yam Road, Tel:6733-5100 19)The Rainforest Resort Living, 6 Jalan Ampas, #01-04, Tel:6338-9788 20)Country Haven, 452 Upper Bukit Timah Road, The Rail Mall, S678206, Tel: 65-67643904 21)Changi village antique's at Katong mall, http://cva.com.sg/ 22)Pagoda Teak Furniture, 8 Jalan Kilang Barat Singapore 159351, Tel:6272-5767 23)Vintage Palace Pte Ltd, Blk 7 #01/03 Dempsey Road, Tel: 64792181 24)Teak Villa, 5 Upper Aljunied Link #01-05, S367903, Tel: 62844556 25) Frangipani Homes, 177 River Valley Road, #01-19, #02-26/31, #02-38/40 Liang Court, Tel: 64819182 26)Silver River, 5 Little Road #B1-01/04 & 06 Cemtex Industrial Building hope the above helps

go joo chiat complex and the pasar malam as now they put all out on display for hari raya.

wah so strong ya like that will our hand skin drop? !! !! !!

hi, refer to my posting above. hope it helps to make the pic clearer to you.

u r welcome. that's juz my quote base on my calculation and sizing. but it will be better if you show them your flr plan den they can calculate and size properly for you. if undersize, some of your hse area which you intend to air-con, may not be cold. if oversize, some area may be too cold whenever you on your air-con.

yours shld be around there. but do call up more air-con retailers to get more quotation base on this configuration lor... like that den you can compare. and it will be better if you show them your flr plan den they can calculate and size properly for you. if undersize, some of your hse area which you intend to air-con, may not be cold. if oversize, some area may be too cold whenever you on your air-con.

hi tingshen, u r welcome. im juz sharing my experience with my washing machine only coz 5yrs ago, i juz gotten married and moved hse so dun hv alot of spare $$ so everything must budget and at that time such washing machine not expensive. after i buy and use, 1 fine day one of my colig asked me wat i used and i told her, u know wat she says? "Haiyo! hw cum you buy this type of washing machine?? No warm water function cannot kill bacteria and germs leh... mine cost me S$1k++, blah blah blah... " den after that she say its high electicity and water consumption!! wat can i say? !! hee hee... im that kind of person who will juz laf away coz wat suits you may not be wat i like. and i like to ask those aunties who do alot of hsewk on wat r their experiences when i want to buy hsehold items. they r ususally quite rite abt alot of things. juz hope that it help you in your selection of washing machine and happy hunting ya hi lawry, measure the washing machine physically. try to go to those shopping centres where they display the washing machine that you want, den measure it. get a tailor measuring tape if you find troublesome to take those pulling metal tape coz its kinda bulky. or better still, get those paper tape from ikea... its free somemore dun need to pay lor, both of you never hv any black and white signed rite? or if you can ask them got the type of brand you want and can change or not lor. since you know the other guy you regularly buy from, you can try talking to him or tell their boss. dun pay or sign anything at this stage, if not you probably will hv vy vy bad experience when trying to get back your $. always remember, $ is the cause of all problms!!!

the following are a lists of air-con retailers that you can try calling them and faxing them your floor plan for sizing caln and quotation. you can also ask them for advice on what is the best combination. 1) national climate change committee this is website for your infor on air-con http://www.nccc.gov.sg/energylabel/checklist.shtm 2) toshiba http://www.toshiba.com.sg/HA/Content/Categ...dc503f2ef404802 3) LG a) http://www.nccc.gov.sg/energylabel/lge.shtm b) http://sg.lge.com/support/dealerList_north.jsp#aircon 3) mitsubishi heavy industries http://www.nccc.gov.sg/energylabel/mitsubi...industries.shtm 4) sharp http://www.nccc.gov.sg/energylabel/sharp.shtm 5) fujitsu http://www.nccc.gov.sg/energylabel/fujitsu.shtm 6) general http://www.nccc.gov.sg/energylabel/general.shtm 7) mcquay http://www.nccc.gov.sg/energylabel/mcquay.shtm 8) panasonic a) http://www.nccc.gov.sg/energylabel/panasonic.shtm b) http://panasonic.com.sg/web/Contents/MainCont.asp?ContId=112 9) hitachi http://www.nccc.gov.sg/energylabel/hitachi.shtm 10) daikin http://www.nccc.gov.sg/energylabel/daikin.shtm 11) mitsubishi electric http://www.nccc.gov.sg/energylabel/mitsubishielectric.shtm 12) samsung http://www.nccc.gov.sg/energylabel/samsung.shtm air-con retailers cum installers 1) coolserve http://www.coolserve.com.sg/htmdocs/coolAd...visor.asp?id=10 2) best tech http://www.besttechaircon.com/ 3) Etronin Air-Conditioners & Electric Blk 633 Veerasamy Road #01-128 Singapore 200633 Tel: 62948931 4) hong tar http://www.hongtar.com.sg/ air-con certified installers: www.bca.gov.sg/academy/Trained_Installers.aspx hope the above infor helps. these are the quotes i was given for toshiba. toshiba system 3 inverter (got this combination as i need to cool a big hall and MBR) and i am installing 2 sets of system 3 (if i do decide on system 3) outdoor unit: RAS-3M23YACV - 24,000BTU/Hr x 1 unit indoor unit: a) RAS-M10NKCV - 9,000BTU/Hr x 2 unit + b) RAS-M13NKCV - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - S$2,780 b) Best tech - S$2,653.60 c) mega - S$2,550.00 d) hong huat - S$3,103 e) federal - S$2,398.00 toshiba system 4 inverter (if i get this combination, i would need to get 1 more single split system coz not enough for my hm) outdoor unit: RAS-4M30YACV - 30,000 - 34,000BTU/Hr x 1 unit indoor unit: a) RAS-M10NKCV - 9,000BTU/Hr x 3 unit + b) RAS-M13NKCV - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - S$3,730 b) Best tech - S$3,456.10 c) mega - S$3,400 d) hong huat - S$3,531 e) federal - S$3,400 if bracket is required, the prices are: a) h@ng ta - S$120 b) Best tech - S$150 c) mega - S$120 d) hong huat - S$100 e) federal - never state all piping and insulation base on manufacturer's spec. basically its either, armaflex, k-flex, thermaflex, totaline insulation etc. cu piping as per manufacturer's specs. piping and cabling all in pvc trunking. these are the quotes i was given for mitsubishi. mitsubishi system 3 inverter (got this combination as i need to cool a big hall and MBR) and i am installing 2 sets of system 3 (if i do decide on system 3) outdoor unit: MXY-3A28VA - 30,000BTU/Hr x 1 unit indoor unit: a) MSXY-GA10 - 9,000BTU/Hr x 2 unit + b) MSXY-GA13VA - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - (mitsubishi electric)S$2,900 / (mitsubishi heavy) S$2,680 b) Best tech - S$2,653.60 c) hong huat - S$2,950 d) all best - S$2,731 e) best denki - S$3,299.00 f) double-h aircond - 3,150.00 g) golden harvest h) systematic airconditioning - S$3,100 mitsubishi system 4 inverter (if i get this combination, i would need to get 1 more single split system coz not enough for my hm) outdoor unit: MXY-4A28VA - 30,000BTU/Hr x 1 unit indoor unit: a) MSXY-GA10 - 9,000BTU/Hr x 3 unit + b) MSXY-GA13VA - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - S$3,730 b) hong huat - S$3,650 if bracket is required, the prices are: a) h@ng ta - S$120 b) hong huat - S$100 c) all best - S$150 d) best denki - S$110 e) systematic airconditioning - S$100 all piping and insulation base on manufacturer's spec. basically its either, armaflex, k-flex, thermaflex, totaline insulation etc. cu piping as per manufacturer's specs. piping and cabling all in pvc trunking.

the following are a lists of air-con retailers that you can try calling them and faxing them your floor plan for sizing caln and quotation. you can also ask them for advice on what is the best combination. 1) national climate change committee this is website for your infor on air-con http://www.nccc.gov.sg/energylabel/checklist.shtm 2) toshiba http://www.toshiba.com.sg/HA/Content/Categ...dc503f2ef404802 3) LG a) http://www.nccc.gov.sg/energylabel/lge.shtm b) http://sg.lge.com/support/dealerList_north.jsp#aircon 3) mitsubishi heavy industries http://www.nccc.gov.sg/energylabel/mitsubi...industries.shtm 4) sharp http://www.nccc.gov.sg/energylabel/sharp.shtm 5) fujitsu http://www.nccc.gov.sg/energylabel/fujitsu.shtm 6) general http://www.nccc.gov.sg/energylabel/general.shtm 7) mcquay http://www.nccc.gov.sg/energylabel/mcquay.shtm 8) panasonic a) http://www.nccc.gov.sg/energylabel/panasonic.shtm b) http://panasonic.com.sg/web/Contents/MainCont.asp?ContId=112 9) hitachi http://www.nccc.gov.sg/energylabel/hitachi.shtm 10) daikin http://www.nccc.gov.sg/energylabel/daikin.shtm 11) mitsubishi electric http://www.nccc.gov.sg/energylabel/mitsubishielectric.shtm 12) samsung http://www.nccc.gov.sg/energylabel/samsung.shtm air-con retailers cum installers 1) coolserve http://www.coolserve.com.sg/htmdocs/coolAd...visor.asp?id=10 2) best tech http://www.besttechaircon.com/ 3) Etronin Air-Conditioners & Electric Blk 633 Veerasamy Road #01-128 Singapore 200633 Tel: 62948931 4) hong tar http://www.hongtar.com.sg/ air-con certified installers: www.bca.gov.sg/academy/Trained_Installers.aspx hope the above infor helps. these are the quotes i was given for toshiba. toshiba system 3 inverter (got this combination as i need to cool a big hall and MBR) and i am installing 2 sets of system 3 (if i do decide on system 3) outdoor unit: RAS-3M23YACV - 24,000BTU/Hr x 1 unit indoor unit: a) RAS-M10NKCV - 9,000BTU/Hr x 2 unit + b) RAS-M13NKCV - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - S$2,780 b) Best tech - S$2,653.60 c) mega - S$2,550.00 d) hong huat - S$3,103 e) federal - S$2,398.00 toshiba system 4 inverter (if i get this combination, i would need to get 1 more single split system coz not enough for my hm) outdoor unit: RAS-4M30YACV - 30,000 - 34,000BTU/Hr x 1 unit indoor unit: a) RAS-M10NKCV - 9,000BTU/Hr x 3 unit + b) RAS-M13NKCV - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - S$3,730 b) Best tech - S$3,456.10 c) mega - S$3,400 d) hong huat - S$3,531 e) federal - S$3,400 if bracket is required, the prices are: a) h@ng ta - S$120 b) Best tech - S$150 c) mega - S$120 d) hong huat - S$100 e) federal - never state all piping and insulation base on manufacturer's spec. basically its either, armaflex, k-flex, thermaflex, totaline insulation etc. cu piping as per manufacturer's specs. piping and cabling all in pvc trunking. these are the quotes i was given for mitsubishi. mitsubishi system 3 inverter (got this combination as i need to cool a big hall and MBR) and i am installing 2 sets of system 3 (if i do decide on system 3) outdoor unit: MXY-3A28VA - 30,000BTU/Hr x 1 unit indoor unit: a) MSXY-GA10 - 9,000BTU/Hr x 2 unit + b) MSXY-GA13VA - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - (mitsubishi electric)S$2,900 / (mitsubishi heavy) S$2,680 b) Best tech - S$2,653.60 c) hong huat - S$2,950 d) all best - S$2,731 e) best denki - S$3,299.00 f) double-h aircond - 3,150.00 g) golden harvest h) systematic airconditioning - S$3,100 mitsubishi system 4 inverter (if i get this combination, i would need to get 1 more single split system coz not enough for my hm) outdoor unit: MXY-4A28VA - 30,000BTU/Hr x 1 unit indoor unit: a) MSXY-GA10 - 9,000BTU/Hr x 3 unit + b) MSXY-GA13VA - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - S$3,730 b) hong huat - S$3,650 if bracket is required, the prices are: a) h@ng ta - S$120 b) hong huat - S$100 c) all best - S$150 d) best denki - S$110 e) systematic airconditioning - S$100 all piping and insulation base on manufacturer's spec. basically its either, armaflex, k-flex, thermaflex, totaline insulation etc. cu piping as per manufacturer's specs. piping and cabling all in pvc trunking.

these are the quotes i was given for toshiba. toshiba system 3 inverter (got this combination as i need to cool a big hall and MBR) and i am installing 2 sets of system 3 (if i do decide on system 3) outdoor unit: RAS-3M23YACV - 24,000BTU/Hr x 1 unit indoor unit: a) RAS-M10NKCV - 9,000BTU/Hr x 2 unit + b) RAS-M13NKCV - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - S$2,780 b) Best tech - S$2,653.60 c) mega - S$2,550.00 d) hong huat - S$3,103 e) federal - S$2,398.00 toshiba system 4 inverter (if i get this combination, i would need to get 1 more single split system coz not enough for my hm) outdoor unit: RAS-4M30YACV - 30,000 - 34,000BTU/Hr x 1 unit indoor unit: a) RAS-M10NKCV - 9,000BTU/Hr x 3 unit + b) RAS-M13NKCV - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - S$3,730 b) Best tech - S$3,456.10 c) mega - S$3,400 d) hong huat - S$3,531 e) federal - S$3,400 if bracket is required, the prices are: a) h@ng ta - S$120 b) Best tech - S$150 c) mega - S$120 d) hong huat - S$100 e) federal - never state all piping and insulation base on manufacturer's spec. basically its either, armaflex, k-flex, thermaflex, totaline insulation etc. cu piping as per manufacturer's specs. piping and cabling all in pvc trunking. these are the quotes i was given for mitsubishi. mitsubishi system 3 inverter (got this combination as i need to cool a big hall and MBR) and i am installing 2 sets of system 3 (if i do decide on system 3) outdoor unit: MXY-3A28VA - 30,000BTU/Hr x 1 unit indoor unit: a) MSXY-GA10 - 9,000BTU/Hr x 2 unit + b) MSXY-GA13VA - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - (mitsubishi electric)S$2,900 / (mitsubishi heavy) S$2,680 b) Best tech - S$2,653.60 c) hong huat - S$2,950 d) all best - S$2,731 e) best denki - S$3,299.00 f) double-h aircond - 3,150.00 g) golden harvest h) systematic airconditioning - S$3,100 mitsubishi system 4 inverter (if i get this combination, i would need to get 1 more single split system coz not enough for my hm) outdoor unit: MXY-4A28VA - 30,000BTU/Hr x 1 unit indoor unit: a) MSXY-GA10 - 9,000BTU/Hr x 3 unit + b) MSXY-GA13VA - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - S$3,730 b) hong huat - S$3,650 if bracket is required, the prices are: a) h@ng ta - S$120 b) hong huat - S$100 c) all best - S$150 d) best denki - S$110 e) systematic airconditioning - S$100 all piping and insulation base on manufacturer's spec. basically its either, armaflex, k-flex, thermaflex, totaline insulation etc. cu piping as per manufacturer's specs. piping and cabling all in pvc trunking. hi, i got a list of checklist but its kinda long to state here.

these are the quotes i was given for toshiba. toshiba system 3 inverter (got this combination as i need to cool a big hall and MBR) and i am installing 2 sets of system 3 (if i do decide on system 3) outdoor unit: RAS-3M23YACV - 24,000BTU/Hr x 1 unit indoor unit: a) RAS-M10NKCV - 9,000BTU/Hr x 2 unit + b) RAS-M13NKCV - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - S$2,780 b) Best tech - S$2,653.60 c) mega - S$2,550.00 d) hong huat - S$3,103 e) federal - S$2,398.00 toshiba system 4 inverter (if i get this combination, i would need to get 1 more single split system coz not enough for my hm) outdoor unit: RAS-4M30YACV - 30,000 - 34,000BTU/Hr x 1 unit indoor unit: a) RAS-M10NKCV - 9,000BTU/Hr x 3 unit + b) RAS-M13NKCV - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - S$3,730 b) Best tech - S$3,456.10 c) mega - S$3,400 d) hong huat - S$3,531 e) federal - S$3,400 if bracket is required, the prices are: a) h@ng ta - S$120 b) Best tech - S$150 c) mega - S$120 d) hong huat - S$100 e) federal - never state all piping and insulation base on manufacturer's spec. basically its either, armaflex, k-flex, thermaflex, totaline insulation etc. cu piping as per manufacturer's specs. piping and cabling all in pvc trunking. these are the quotes i was given for mitsubishi. mitsubishi system 3 inverter (got this combination as i need to cool a big hall and MBR) and i am installing 2 sets of system 3 (if i do decide on system 3) outdoor unit: MXY-3A28VA - 30,000BTU/Hr x 1 unit indoor unit: a) MSXY-GA10 - 9,000BTU/Hr x 2 unit + b) MSXY-GA13VA - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - (mitsubishi electric)S$2,900 / (mitsubishi heavy) S$2,680 b) Best tech - S$2,653.60 c) hong huat - S$2,950 d) all best - S$2,731 e) best denki - S$3,299.00 f) double-h aircond - 3,150.00 g) golden harvest h) systematic airconditioning - S$3,100 mitsubishi system 4 inverter (if i get this combination, i would need to get 1 more single split system coz not enough for my hm) outdoor unit: MXY-4A28VA - 30,000BTU/Hr x 1 unit indoor unit: a) MSXY-GA10 - 9,000BTU/Hr x 3 unit + b) MSXY-GA13VA - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - S$3,730 b) hong huat - S$3,650 if bracket is required, the prices are: a) h@ng ta - S$120 b) hong huat - S$100 c) all best - S$150 d) best denki - S$110 e) systematic airconditioning - S$100 all piping and insulation base on manufacturer's spec. basically its either, armaflex, k-flex, thermaflex, totaline insulation etc. cu piping as per manufacturer's specs. piping and cabling all in pvc trunking.

these are the quotes i was given for toshiba. toshiba system 3 inverter (got this combination as i need to cool a big hall and MBR) and i am installing 2 sets of system 3 (if i do decide on system 3) outdoor unit: RAS-3M23YACV - 24,000BTU/Hr x 1 unit indoor unit: a) RAS-M10NKCV - 9,000BTU/Hr x 2 unit + b) RAS-M13NKCV - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - S$2,780 b) Best tech - S$2,653.60 c) mega - S$2,550.00 d) hong huat - S$3,103 e) federal - S$2,398.00 toshiba system 4 inverter (if i get this combination, i would need to get 1 more single split system coz not enough for my hm) outdoor unit: RAS-4M30YACV - 30,000 - 34,000BTU/Hr x 1 unit indoor unit: a) RAS-M10NKCV - 9,000BTU/Hr x 3 unit + b) RAS-M13NKCV - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - S$3,730 b) Best tech - S$3,456.10 c) mega - S$3,400 d) hong huat - S$3,531 e) federal - S$3,400 if bracket is required, the prices are: a) h@ng ta - S$120 b) Best tech - S$150 c) mega - S$120 d) hong huat - S$100 e) federal - never state all piping and insulation base on manufacturer's spec. basically its either, armaflex, k-flex, thermaflex, totaline insulation etc. cu piping as per manufacturer's specs. piping and cabling all in pvc trunking. these are the quotes i was given for mitsubishi. mitsubishi system 3 inverter (got this combination as i need to cool a big hall and MBR) and i am installing 2 sets of system 3 (if i do decide on system 3) outdoor unit: MXY-3A28VA - 30,000BTU/Hr x 1 unit indoor unit: a) MSXY-GA10 - 9,000BTU/Hr x 2 unit + b) MSXY-GA13VA - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - (mitsubishi electric)S$2,900 / (mitsubishi heavy) S$2,680 b) Best tech - S$2,653.60 c) hong huat - S$2,950 d) all best - S$2,731 e) best denki - S$3,299.00 f) double-h aircond - 3,150.00 g) golden harvest h) systematic airconditioning - S$3,100 mitsubishi system 4 inverter (if i get this combination, i would need to get 1 more single split system coz not enough for my hm) outdoor unit: MXY-4A28VA - 30,000BTU/Hr x 1 unit indoor unit: a) MSXY-GA10 - 9,000BTU/Hr x 3 unit + b) MSXY-GA13VA - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - S$3,730 b) hong huat - S$3,650 if bracket is required, the prices are: a) h@ng ta - S$120 b) hong huat - S$100 c) all best - S$150 d) best denki - S$110 e) systematic airconditioning - S$100 all piping and insulation base on manufacturer's spec. basically its either, armaflex, k-flex, thermaflex, totaline insulation etc. cu piping as per manufacturer's specs. piping and cabling all in pvc trunking.

these are the quotes i was given for toshiba. toshiba system 3 inverter (got this combination as i need to cool a big hall and MBR) and i am installing 2 sets of system 3 (if i do decide on system 3) outdoor unit: RAS-3M23YACV - 24,000BTU/Hr x 1 unit indoor unit: a) RAS-M10NKCV - 9,000BTU/Hr x 2 unit + b) RAS-M13NKCV - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - S$2,780 b) Best tech - S$2,653.60 c) mega - S$2,550.00 d) hong huat - S$3,103 e) federal - S$2,398.00 toshiba system 4 inverter (if i get this combination, i would need to get 1 more single split system coz not enough for my hm) outdoor unit: RAS-4M30YACV - 30,000 - 34,000BTU/Hr x 1 unit indoor unit: a) RAS-M10NKCV - 9,000BTU/Hr x 3 unit + b) RAS-M13NKCV - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - S$3,730 b) Best tech - S$3,456.10 c) mega - S$3,400 d) hong huat - S$3,531 e) federal - S$3,400 if bracket is required, the prices are: a) h@ng ta - S$120 b) Best tech - S$150 c) mega - S$120 d) hong huat - S$100 e) federal - never state all piping and insulation base on manufacturer's spec. basically its either, armaflex, k-flex, thermaflex, totaline insulation etc. cu piping as per manufacturer's specs. piping and cabling all in pvc trunking. these are the quotes i was given for mitsubishi. mitsubishi system 3 inverter (got this combination as i need to cool a big hall and MBR) and i am installing 2 sets of system 3 (if i do decide on system 3) outdoor unit: MXY-3A28VA - 30,000BTU/Hr x 1 unit indoor unit: a) MSXY-GA10 - 9,000BTU/Hr x 2 unit + b) MSXY-GA13VA - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - (mitsubishi electric)S$2,900 / (mitsubishi heavy) S$2,680 b) Best tech - S$2,653.60 c) hong huat - S$2,950 d) all best - S$2,731 e) best denki - S$3,299.00 f) double-h aircond - 3,150.00 g) golden harvest h) systematic airconditioning - S$3,100 mitsubishi system 4 inverter (if i get this combination, i would need to get 1 more single split system coz not enough for my hm) outdoor unit: MXY-4A28VA - 30,000BTU/Hr x 1 unit indoor unit: a) MSXY-GA10 - 9,000BTU/Hr x 3 unit + b) MSXY-GA13VA - 12,000BTU/Hr x 1 unit prices do not include bracket coz i hv concrete aircon ledge: a) h@ng ta - S$3,730 b) hong huat - S$3,650 if bracket is required, the prices are: a) h@ng ta - S$120 b) hong huat - S$100 c) all best - S$150 d) best denki - S$110 e) systematic airconditioning - S$100 all piping and insulation base on manufacturer's spec. basically its either, armaflex, k-flex, thermaflex, totaline insulation etc. cu piping as per manufacturer's specs. piping and cabling all in pvc trunking.

im here... im here... wah bro, i like your metal soap cedarfresh leh... can clean hands and smell....