Not much update this week as not much work was done in the early week

Platform for Carpentry, Fridge, Washing Machine + Kitchen Floor Tiling Done

Tiles for both MBR & Common Bathroom Done

Aircon Piping (Done by Tim from this Forum) will be laid and will be completed by this weekend.

**Next week Water & Gas pipe will be laid follow by the start of False Ceiling & some Box-Up.

This is the part 1 of warzone... Part 2 is the moving of many many stuffs and unpacking.

This is the part 1 of warzone... Part 2 is the moving of many many stuffs and unpacking.

Hahaha ~

Totally agree on it but let me finish this phase of the warzone first ~

New gas pipe have been laid.

Aircon piping have also been done

In order to hide most of the aircon trunking & aesthetic purpose, the ID & Aircon installation guy manage to persuade me to fix the aircon for the living room to be just above the storeroom door. (Picture as per below - Beside the piping that stick out))

The installation guy claimed that 18K BTU will be able to cool the living room easily by adjusting the wind to blow below the beam in front and into the living room.

(*Hope they are right on this)

I have Dunlopillo vouchers as per below.

The expiry date for purchase is 30th June.

If anyone is interested, you can collect it from me.

Not much work has been done except for the Box-Up and false ceiling.

Living room Box-Up (Need to wait for Fiber to be installed to continue to Box-Up) & False Ceiling

Kitchen Box-Up

MBR Box-Up

For the piping above the door, it will not be able to box-up as its too near to door .

Hope it will not be obvious after painting works is done.

Edited June 3, 201412 yr by Songz

No more updates?

Sorry but I have been busy with work + just went to oversea for work (The network there is so bad that I don even bother to on my cpu)

Below are the updates so far :

First coat of painting have been done.

OpenNet have also finally come and install the point (Delay my BoxUp by the window - Not shown here)

First coat painting for room is done and door for bathroom is installed

Tiling for Kitchen is done + Rubbish chute installed (Below does not have tiles as there will be carpentry works to cover it)

The top piping part will be BoxUp.

Due to restriction on number of photos per post thus the 2nd post.

Ledge is completed (This is for me to put my leg up after bath to dry with towel) in MBR

Sanitary (Toilet Bowl & Basin+tap is installed)

Due to the small size of the MBR, I have decided to use a corner basin to save space)

Sanitary (Toilet Bowl & Basin+tap is installed)

Space constraint again but at least its bigger than MBR bathroom thus able to place the basin in front of the toilet bowl.

*For the rack, water heater and etc, it will be installed at a later date

look like completing soon~~ ^^

look like completing soon~~ ^^

Not really actually.

Still quite a lot of things to do.

Most of the lights & switches are installed (Some can only be installed after carpentry) + Fan

One of the switch have defect and will inform ID about it today when meet him tonight.

Most of the lights & switches are installed (Some can only be installed after carpentry) + Fan

One of the switch have defect and will inform ID about it today when meet him tonight.

Nice ...... bro, no cove lighting in the false ceiling??

Nice ...... bro, no cove lighting in the false ceiling??

The only cove light (If it counts) is the straight ledge you see in the picture.

Not really a fan of cove light and the main purpose of it in the picture is to cover the beam

Aircon was installed too from RT forum : Tim (Starmex System 3)

Living - MBR - Room