Darksire
Members
-
Joined
-
Last visited
Everything posted by Darksire
-
Hi Can I get a quote for the following? 1. Rinnai RB-2CG LPG 2. Rinnai RB-2Gi LPG
- 2319 replies
-
- fridge
- gas heater
- hob
- hood
-
Tagged with:
-
Good to hear that once rust is removed, they dont come back easily. Thought Kraus would have used a better quality stainless steel considering the way they market their product as better than the average with G16 thickness and sound proofing base. Maybe good quality stuff no longer exist today as the sink I am using for the past 20 years never had rust spotted and it only cost me <$200.
-
Thank you for sharing your experience. Surprise to hear that the stainless stain Kraus use can get rusty. What about scratches? Are you using it with the tray provided?
-
Hi everyone. Can anyone share their experience with Kraus sink? I am interested in getting the KHU100-32 but found poor reviews on amazon. Anyone have problem with draining water as the base is too flat and also rust at spot which accumulate water? Regards Alvin Choo
-
Hi everyone, can someone share contacts for marble suppliers selling at reasonable pricing? Looking for white, cream or beige ones. Thanks.
-
-
-
Got it. One control cable from heater to control panel. Power cable to heater tank. Thanks for sharing.
-
Any user who switch off supply to air con frequently can share if their compressor is still working?
-
Thanks for your feedback. The multiple might be a function for more than 1 user using hot water and therefore increase output to heat up water? From your description above, there seems to be another control cable running from the heater to the electronic switch. So in total the electronic switch has 2 cables wired to it? 1 power cable and 1 control cable?
-
Hi changbp Hows your experience with the ao smith heater? Both ease of use and waiting time for hot water. What about the MAX function? Does it supply hot water fast enough?
-
Aron Just drop you an email for quotation. Thanks.
-
-
Thanks for your reply. I was told 2.5 bar is enough. Any existing user can verify? What about storage heater? Will 35L be sufficent?
-
Hi penguin123 how many litres of water heater are u using with your rainshower? Is it hansgrohe 240 or 300 raindance?
-
Hi antone has experience with hansgrohe 240mm or 300mm overhead rainshower? How many litres of heater is recommended? Thanks.
-
Hi Anyone using joven heater with hansgrohe rainshower? How many litres for your storage heater are u using?
-
Hi everyone, I know this is an old thread but thought it maybe good to gather feedback from existing users. I am intending to install either 240mm (27477000) or 300mm (27494000) hansgrohe overhead raindance shower. How many litres of joven heater should I get considering 5 mins of rainshower? Understand that the output of rainshower is approx 18L/min, so mix half hot water with cold water = 9L/min. 5 mins will need 45L? What about water pressure? Does it require min of 2 bar to function properly? Thanks.
-
Hi everyone I am new to this forum. Am looking for a builder for A&A works. A&A land 3800 sqf build up 4200 sqf 2+1 Need recommendation or if you are builder yourself, you can contact me at 8xxx three three two xxxxx. Thanks.
