Hi Tim,

Could you please quote me Mitsubishi Sys 2 Heavy industries (18+9K btu) and also Panasonic Inverter sys 2 with same btu. Thank you!

Hi Tim,

Good day!

Can you pm me the quote for

1) Mitsubishi Starmex/heavy Industries Inverter Sys 3 w installation.

Please advise your Insulation type, copper piping and water piping used.

Thanks!

Looking for installations quotes too..

*Will rent out room...so need them to tahan abuse by "ppl" long.....

Mainly need is 又便宜，又好。。。

House 1 [4 rm BTO]

1) 9k BTU x 3

2) 9k BTU x2 + 12k BTU x1

House 2 [5 rm BTO]

1) 9k BTU x 3 + living room

2) 9k BTU x 2 + 12k BTU + living room

Both flat same block so easier for you too..

*Do advice outdoor unit is how many BTU.

Thank you very much.

Email sent !

Hi Tim

Can you pls pm me the quote for Inverter sys 3

Mitsuibishi

Daikin

Toshiba

Panasonic

Thanks

Pls quote mitsubishi inverter sys 3 for 5 rm. Thanks.

Please quote mitsubishi system 3 for 4 rm.

Please quote suitable inverter system (3 different brands for comparison) for EA with following configuration:

3 rooms + 1 study

and

Living/Dining/Corridor area

Thanks!

Dear Tim

Could you provide me with recommendation for System 4 air conditioner?

Below are some of the information to help you recommend:

Flat Type

4 room HDB flat @ Punggol

Brand

Mitsubishi or Daikin

BTU

- 9,000 BTU for 3 bedroom

- 18,000 BTU for living room

other things to note:

- 2 trip installation

- 1/2" armaflex (Class 0 or 1 PSB certified insulation)

- G23 copper (what is the length used?)

- 16mm PVC water drainage piping (unlimited piping & trunking)

Recently, I had engaged Tim to do Air-Con installation for my new flat. He was a friendly chap who gave me advises on where to place the air-con and what to look out for. He also made the effort to liaise with my ID for the air-con installation. The piping was neatly laid and the air-cons are covered to protect them from dust. Overall. it was a pleasant experience.

Hi Tim,

Can you quote me for system 4 (Toshiba or Mitsubishi) & 3+1 system for a HDB 5Rm?

Need it for 3 rooms & Living/Dining (larger BTU needed)

Thanks.

Dear Tim,

Can you quote me Mitsubishi Starmex Sys 2 + installation.

Thanks.

Dear Tim

Please quote for System4/5. Toshiba or starmex is

Flat Type

5 room. But used to be 2 3 room combine by government. 4 bedroom. Master rm bigger then normal.

Brand

Mitsubishi or Toshiba

BTU

- 9,000 BTU for 3 bedroom

- 12'000 BTU for maater

- 12 or higher for living.

other things to note:

- 2 trip installation

- 1/2" armaflex

- G23 copper

- 16mm PVC water drainage piping

- 3c70 outdoor, 3c40indoor?

Bracket maybe if you could reuse. But the wooden panel board need to change. 15 amp socket already installed.

Trade in. Mhi s4.

I went to gc but don't like their attitude. Kindly give best cost for s5 , will seriously consider if attractive.

And pls advice mode of payment. Any cc installment.

Cheers

Cueball15@gmail.com

Tim, kindly get back to me tomorrow if possible ok.

CHeers

Pls provide recommendation for 5 rm flat. Going to combine MBR with bedroom 3 so thinking of the following

Option 1

Living 18k btu

Bedroom 2 9k btu

MBR 18k btu

Option 2

Living 18k btu

Bedroom 2 9k btu

Bedroom 3 9k btu

MBR 9k btu