November 11, 201016 yr First attempt at on ikea hack Our final product: Not bad for $8. Still have the original base and 4 sides to play with... I like! Edited November 11, 201016 yr by curryqueen
November 15, 201016 yr Adding colour to our home: -a half successful project- Here is why its half successful... Paint also does not stick very well, no primer probably.... But overall still very satisfying!!
November 15, 201016 yr I must both of u got very handy hands! I like the ikea rack. The block u used to put the knives comes with it?
November 16, 201016 yr I must both of u got very handy hands! I like the ikea rack. The block u used to put the knives comes with it? Thanks for the compliment! yes the block for knifes is part of the ikea cutlery tray. i think its a discontinued item under the AS-IS department. Can try your luck there!
November 20, 201016 yr Issue with CNS continued: So we tried this: Apparantly, the stuff will make the rust turn black and it acts as a primer for re-painting. Lucky for us our door is black so lazy us shall do away with painting once again. hey gim, where can you get this? My CNS gate also kenna a bit of rust already..... sigh....
November 21, 201016 yr hey gim, where can you get this? My CNS gate also kenna a bit of rust already..... sigh.... i got it from Homely. they have a few branches around singapore. is ur gate is black? if its not black i think cannot use rust coverter as the rust converter turns the rust into a "black patch"..
November 21, 201016 yr i got it from Homely. they have a few branches around singapore. is ur gate is black? if its not black i think cannot use rust coverter as the rust converter turns the rust into a "black patch".. yup it's black. Think the standard cheap CNS gate only have black colour, haha... Alright, will check Homely out. thks.
November 21, 201015 yr Karang Guni Mission: Met up with bro Dex to collect the grilles. Walked past his row of neighbours, so many of them still using the original HDB main door and grilles. Wished i had them! Had trouble taking putting the whole door frame into the car, so had to throw part of the door grille away. After like 40mins of struggling and sweating, baby, my buddy and i finally managed to remove part of the door grille. So im left with this part of the door grille... This will be part of our walk in wardrobe, to hang some ties, accessories, etc. Will be making this the feature of the WIW by painting it in bright colours...can't wait for Nov to end to start on this! With the help of my buddy's van, we carried the big window grille as well, its much heaviier than i thought! A closer look at the window grille: A very satisfying weekend!!
November 21, 201015 yr Karang Guni Mission: Met up with bro Dex to collect the grilles. Walked past his row of neighbours, so many of them still using the original HDB main door and grilles. Wished i had them! Had trouble taking putting the whole door frame into the car, so had to throw part of the door grille away. After like 40mins of struggling and sweating, baby, my buddy and i finally managed to remove part of the door grille. So im left with this part of the door grille... This will be part of our walk in wardrobe, to hang some ties, accessories, etc. Will be making this the feature of the WIW by painting it in bright colours...can't wait for Nov to end to start on this! With the help of my buddy's van, we carried the big window grille as well, its much heaviier than i thought! A closer look at the window grille: A very satisfying weekend!! so my guess you are stripping bare the entire gate, sand them down and prepare for a fresh coat or primer and anti-rust paint?
November 23, 201015 yr so my guess you are stripping bare the entire gate, sand them down and prepare for a fresh coat or primer and anti-rust paint? i think that would be the proper way. im a bit inclined to try the shortcut way, still researching on feedback by users on this: From Estore.com.sg: Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces, and thanks to its special 3 in 1 formula there is no need to use a primer or undercoat - saving you precious time! Touch dry in an hour, Hammerite gives long-lasting protection and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Apply direct to rust Protects for up to 5 years No primer or undercoat required For metal inside and outside the home
November 23, 201015 yr Looking to see another gimz+baby project. Sorry, don't have much tools to aid your transportation.. Karang Guni Mission: Met up with bro Dex to collect the grilles. Walked past his row of neighbours, so many of them still using the original HDB main door and grilles. Wished i had them! Had trouble taking putting the whole door frame into the car, so had to throw part of the door grille away. After like 40mins of struggling and sweating, baby, my buddy and i finally managed to remove part of the door grille. So im left with this part of the door grille... This will be part of our walk in wardrobe, to hang some ties, accessories, etc. Will be making this the feature of the WIW by painting it in bright colours...can't wait for Nov to end to start on this! Looks like you have discovered another gem. estore does have quite alota of goodies at a reasonably cheaper price. i think that would be the proper way. im a bit inclined to try the shortcut way, still researching on feedback by users on this: From Estore.com.sg: Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces, and thanks to its special 3 in 1 formula there is no need to use a primer or undercoat - saving you precious time! Touch dry in an hour, Hammerite gives long-lasting protection and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Apply direct to rust Protects for up to 5 years No primer or undercoat required For metal inside and outside the home
November 24, 201015 yr Karang Guni Mission: Met up with bro Dex to collect the grilles. Walked past his row of neighbours, so many of them still using the original HDB main door and grilles. Wished i had them! Had trouble taking putting the whole door frame into the car, so had to throw part of the door grille away. After like 40mins of struggling and sweating, baby, my buddy and i finally managed to remove part of the door grille. So im left with this part of the door grille... This will be part of our walk in wardrobe, to hang some ties, accessories, etc. Will be making this the feature of the WIW by painting it in bright colours...can't wait for Nov to end to start on this! A very satisfying weekend!! This is really creative. I see that you hav a lot of DIY items. So what kind of door you will be having for your WIW? I intend to use curtains in place of doors. It is a cheaper alternative.
November 25, 201015 yr Looking to see another gimz+baby project. Sorry, don't have much tools to aid your transportation.. Looks like you have discovered another gem. estore does have quite alota of goodies at a reasonably cheaper price. i certainly discovere gems! ur window n door grilles...hahah... its gonna be my project for december...still got quite some stuff to do for the WIW area... yeap, estore pricing for paints are good as well, shud be making a trip there soon.
November 25, 201015 yr This is really creative. I see that you hav a lot of DIY items. So what kind of door you will be having for your WIW? I intend to use curtains in place of doors. It is a cheaper alternative. well, me and wifey are certainly going to make use of this shifting house to "play" with all the stuff...its gonna be a once in a lifetime kinda thing. right now, WIW is open concept. But im quite concerned with the dust problem, maybe would put up string curtains in future, though i still prefer the open concept style. sliding doors are expensive and tend to give problems after a few years, i think curtains are better, cheaper and more cosy.
December 6, 201015 yr Ok, time for WIW area. We used the broder system from IKEA. Its a metal pole system with T foot and can be customised to your preferences. Most importantly, loved the industrial look! We have 3 areas, one for shelving in the centre and 2 for hanging clothes. Got the metal shelvings from IKEA. But we faced a problem with the top shelving for the place where we hanged our clothes, IKEA's are too small! Solution: Wood Cut to size. $21 per piece. Cheaper than IKEA and its solid ply. Baby painted it metallic silver: Here is how it looks when we mount it: Edited December 6, 201015 yr by gimz63251073
Create an account or sign in to comment