tips & tricks for sound bar (copied from philips support forum) Center the SoundBar right under the TV for a balanced sound experience, so picture and sound play from the same origin — just the way the cinema engineer intended. Place the SoundBar so that the speakers are in line with your ears. This lets you hear more detail, especially at high frequencies. However, this should be balanced with the preferred height of your TV. Leave at least 1 meter of space between the SoundBar and both sidewalls so the sound reflects in a balanced, symmetrical way. To experience the maximum surround sound effect, allow 3 to 8 meters distance between the sound setup and the listening area. Make sure the SoundBar doesn’t block the TV screen – the TV should be elevated higher, or be wall mounted. The ideal place for the TV and SoundBar is on the wall: if the TV is wall mounted, the SoundBar can be easily mounted under it with the supplied bracket. You can then remove the feet pads for a cleaner look. If wall mounted, leave a 10 to 15 centimeter gap between the SoundBar and TV, so you can access the top control panel and vertical disc loader (for most of our models). The subwoofer can be placed anywhere in the room as long as it’s at least 1 meter away from the main unit. This prevents sound vibrations from interfering with the disc reader. Leave about 10 centimeters between the subwoofer and the wall to let sound carry with the airflow. Obsessed with replicating the ‘live’ experience? Then place your subwoofer on the right side of your TV and SoundBar – the bass and brass section of an orchestra are traditionally located on that side. Great sound also depends on your home environment. A room with curtains and carpet helps to dampen the noise reflections for more authentic sound. Speakers and subwoofers out in the open also produce better sound – so avoid placing them in an enclosed shelf and cupboard space.my ID drew a very nice detailed drawing of all my carpentry works, just like how i learn my D&T back in my sec sch days! as for my TV feature/console, ID thot we are jus placing the soundbar on top of the drawers ... but we are actually gg to mount it! haha ... ID says he normally leave a standard hole for the TV cables at 1100mm from floor for TV mounting. now the measurements are very impt for us becos we are having a soundbar below the TV and future expansion of TV size affects where the TV should b hung now... and once the hole is drilled, its there forever! tentatively we are eyeing on a 50" TV. so now i'm not sure if its ok to leave 10cm from the drawer and 10cm from the TV. i think i shld hav a hole for the cabling to rch the soundbar too? so it will b neater and concealed ... for any bigger TV in the future, i guess i won't get anything bigger than 60" ... cos its either too ex or its too huge for the small living area. just in case i get richer next time the 60" TV will leave only 3.2cm gap from the soundbar ... and 6.4cm gap if its 55" TV, which i'm not sure if its too narrow. and oso i dono whats the probability tt i will upgrade the TV in the future. hmmm should i leave a 15cm gap from the TV to play safe? but visual wise, i personally feel it looks more sleek with the TV and soundbar close tgt ...